SNAP Digital Output Modules Features SNAP Digital Output Modules Description Opto 22 SNAP I/O digital output modules are part of the SNAP PAC System. can quickly check field device wiring. These modules each contain four isolated channels. Customers can choose from AC or DC models. Optical isolation on all solid-state modules provides 4,000 volts of transient (4000 V for 1 ms) protection for sensitive control electronics from Part Numbers industrial field signals. Part All SNAP digital modules have The SNAP-OAC5-i, SNAP-ODC5-i, and SNAP-ODC5A-i modules provide four isolated output channels. removable top-mounted connectors to provide easy access for field wiring. All operate on 5 VDC control logic. Each digital module features integral channel-specific LEDs for convenient troubleshooting and maintenance. Each module is factory tested twice before shipment, and most modules are UL and CE approved. In addition, part numbers ending in FM are Factory Mutual approved. SNAP output modules are used to switch up to four separate AC or DC loads. Output modules that are fused use a standard fuse with a convenient handle for easy replacement. DC outputs are available in either a source or sink configuration. AC outputs are zero voltage turn on and zero current turn off for transient-free switching. See pages SNAP-OAC5 SNAP 4-channel 12-250 VAC output, 5 VDC logic 3, 5 SNAP-OAC5MA SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic with manual/auto switches 3, 6 SNAP-OAC5FM SNAP 4-channel 12-250 VAC output, 5 VDC logic 4, 5 SNAP-OAC5-i SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic 3, 7 SNAP-OAC5-iFM SNAP 4-channel isolated 12-250 VAC output, 5 VDC logic 4, 7 SNAP-ODC5SRC SNAP 4-channel 5-60 VDC output, 5 VDC logic source 8, 12 SNAP-ODC5SRCFM SNAP 4-channel 5-60 VDC output, 5 VDC logic source 10, 12 SNAP-ODC5SNK 8, 13 SNAP 4-channel 5-60 VDC output, 5 VDC logic sink SNAP-ODC5SNKFM SNAP 4-channel 5-60 VDC output, 5 VDC logic sink 10, 13 SNAP-ODC5ASNK SNAP 4-channel 5-200 VDC output, 5 VDC logic sink 9, 13 SNAP-ODC5MA SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic with manual/auto switches 9, 14 SNAP-ODC5-i SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic 9, 15 SNAP-ODC5-iFM SNAP 4-channel isolated 5-60 VDC output, 5 VDC logic 11, 15 SNAP-ODC5A-i SNAP 4-channel isolated 5-200 VDC output, 5 VDC logic 9, 15 SNAP 4-channel isolated 5-200 VDC output, 5 VDC logic 11, 15 SNAP-RETN4 SNAP 4-module retention rail (OEM) -------- SNAP-RETN4B SNAP 4-module retention rail, 25-pack (OEM) -------- SNAP-RETN6 SNAP 6-module retention rail (OEM) -------- SNAP-RETN6B SNAP 6-module retention rail, 25-pack (OEM) -------- SNAP-FUSE4AB SNAP 4-amp fuse, 25-pack -------- SNAP-MODFUSEH SNAP digital output module fuse holder, 10-pack -------- Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET SNAP-ODC5A-iFM Form 1144-110428 SNAP-OAC5MA and SNAP-ODC5MA are special modules featuring manualon/manual-off/automatic switches, ideal for diagnostic testing of control applications. The switches override output from the application, so you Description SNAP Digital Output Modules Four channels per module Convenient pluggable wiring terminals; accepts up to 14 AWG wire Powered by a single 5-volt supply Channel-specific LEDs Operating temperature: 0 to 70 C UL and CE approved (most modules); Factory Mutual approved (part numbers ending in FM) PAGE 1 SNAP Digital Output Modules For Ethernet-based applications requiring higher density of digital I/O points, see Opto 22 form #1556, the SNAP HighDensity Digital Module Data Sheet. Processor connector Module position zero Module connectors Retention bar SNAP Digital Output Modules I/O Processor Compatibility SNAP digital output modules are compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+WirelessTM models. Notes for legacy hardware: SNAP digital output modules are also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000HA. These modules can also be used on B-series and M-series mounting racks. Installation The following diagram shows part of a SNAP mounting rack. The rack is shown without screw connectors. Modules snap securely into place in the row of connectors on the rack. Each module connector has a number. Digital output modules and other types of SNAP I/O modules are mounted on the module connectors starting at module position zero. NOTE: Check the data sheet or user's guide for the brain or onthe-rack controller you are using to determine module features available and any restrictions on module placement. 1. 2. 3. 4. 5. Place the rack so that the module connector numbers are right-side up, with zero on the left, as shown in the diagram above. (If your rack has screw connectors, the screw connectors will be at the bottom.) Position the module over the module connector, aligning the small slot at the base of the module with the retention bar on the rack. When positioning modules next to each other, be sure to align the male and female module keys at the tops of the modules before snapping a module into position. With the module correctly aligned, push on the module to snap it into place. (Optional) Use standard 4-40 x 1/2 truss-head Phillips hold-down screws to secure both sides of each module. CAUTION: Do not over-tighten screws. Follow the wiring diagrams beginning on page 5 to attach modules to the devices they monitor. Form 1144-110428 DATA SHEET Modules require a special tool (provided) for removal. PAGE 2 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Specifications--AC Modules SNAP-OAC5 Key Feature -- SNAP-OAC5MA Diagnostic switches Four isolated channels SNAP-OAC5-i Four isolated channels Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 24-250 VAC 24-250 VAC 24-250 VAC Line Voltage - Nominal 120/240 VAC 120/240 VAC 120/240 VAC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module 3 amps per module One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) Minimum Load Current 20 mA 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC Peak Blocking Voltage 500 V 500 V 500 V Operating Frequency 25-65 Hz 25-65 Hz 25-65 Hz dV/ dt - Off-state 200 volts/msec 200 volts/msec 200 volts/msec dV/ dt - Commutating Snubbed for rated 0.5 power fac- Snubbed for rated 0.5 power Snubbed for rated 0.5 power tor load factor load factor load Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part: BEL 5HF4 Opto 22 Part: SNAP-FUSE4AB Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. Channel-to-channel isolation Not applicable 300 VAC (1500 V transient) 300 VAC (1500 V transient) Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 4 Turn-on Time 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) Turn-off Time 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) Field Side Ratings (each channel) SNAP Digital Output Modules Logic Side Ratings Module Ratings 4,000 volts (transient) 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Temperature Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS Warranty Lifetime 30 months Lifetime Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1144-110428 4,000 volts (transient) 0 to 70 C, operating -30 to 85 C, storage DATA SHEET Isolation (Field Side to Logic Side) 4,000 volts (transient) PAGE 3 SNAP Digital Output Modules Specifications--AC Modules (continued) SNAP Digital Output Modules SNAP-OAC5-FM SNAP-OAC5-i-FM Key Feature Factory Mutual approved Four isolated channels Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 24-250 VAC 24-250 VAC Line Voltage - Nominal 120/240 VAC 120/240 VAC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module One Cycle Surge 80 amps peak (50/60 Hz) 80 amps peak (50/60 Hz) Minimum Load Current 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage at Nominal Voltage - 60 Hz 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC 2.5 mA @ 240 VAC 1.25 mA @ 120 VAC Peak Blocking Voltage 500 V 500 V Operating Frequency 25-65 Hz 25-65 Hz dV/ dt - Off-state 200 volts/msec 200 volts/msec dV/ dt - Commutating Snubbed for rated 0.5 power factor load Snubbed for rated 0.5 power factor load Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part No. SNAP-FUSE4AB Has four isolated channels. User must provide own fusing. Channel-to-channel isolation Not applicable 300 VAC (1500 V transient) Field Side Ratings (each channel) Logic Side Ratings Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Channels Per Module 4 4 Turn-on Time 0.5 cycle maximum (zero volts crossover) 0.5 cycle maximum (zero volts crossover) Turn-off Time 0.5 cycle maximum (zero current crossover) 0.5 cycle maximum (zero current crossover) Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime Form 1144-110428 DATA SHEET Module Ratings PAGE 4 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Schematics SNAP-OAC5 Output Module Part Number Description SNAP-OAC5 4-channel AC output 12-250 VAC 5 VDC logic SNAP-OAC5FM 4-channel AC output 12-250 VAC 5 VDC logic, Factory Mutual approved SNAP Digital Output Modules Form 1144-110428 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 5 SNAP Digital Output Modules Schematics Part Number Description SNAP-OAC5MA 4-channel isolated AC output 12-250 VAC, 5 VDC logic, with manual/auto switch Form 1144-110428 DATA SHEET SNAP Digital Output Modules SNAP-OAC5MA Output Module With Manual/Auto Switches PAGE 6 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Schematics SNAP-OAC5i Isolated Output Module Part Number Description SNAP-OAC5-i 4-channel isolated AC output 12-250 VAC, 5 VDC logic SNAP-OAC5-iFM 4-channel isolated AC output 12-250 VAC, 5 VDC logic, Factory Mutual approved SNAP Digital Output Modules Form 1144-110428 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 7 SNAP Digital Output Modules Specifications--DC Modules SNAP-ODC5SRC SNAP-ODC5SNK Key Feature Load sourcing Load sinking Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) SNAP Digital Output Modules Field Side Ratings (each channel) Line Voltage - Range 5-60 VDC 5-60 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC Current Rating 0 C to 70 C Ambient 3 amps per module 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 60 VDC Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB Channel-to-channel isolation Not applicable Not applicable Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Agency Approvals UL, CE, CSA, RoHS, DFARS UL, CE, CSA, RoHS, DFARS Warranty Lifetime Lifetime Logic Side Ratings Form 1144-110428 DATA SHEET Module Ratings PAGE 8 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Specifications--DC Modules (continued) Key Feature SNAP-ODC5MA SNAP-ODC5-i SNAP-ODC5A-i Diagnostic switches Four isolated channels SNAP-ODC5ASNK Four isolated channels Four isolated channels Load sinking Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) 5-60 VDC 5-60 VDC 5-200 VDC 5-200 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC 5-200 VDC 5-200 VDC Current Rating 0 C to 70 C Ambient 2 amps per module 0.5 amps per channel 3 amps per module 3 amps per module 3 amps per module Surge Current 1.5 amps peak for 1 second 5 amps peak for 1 second 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC 1 mA @ 200 VDC 1 mA @ 200 VDC Peak Blocking Voltage 60 VDC 60 VDC 200 VDC 200 VDC Fuse (Common to all Channels) Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part: BEL 5HF4 Opto 22 Part: SNAPFUSE4AB Channel-to-channel isolation 300 VAC (1500 V transient) 300 VAC (1500 V transient) 300 VAC (1500 V transient) Not applicable Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum 50 mA maximum 50 mA maximum Number of Channels Per Module 4 4 4 4 Turn-on Time 100 usec 100 usec 100 usec 100 usec Turn-off Time 750 usec 750 usec 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) 4,000 volts (transient) Temperature 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Agency Approvals UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS Warranty 30 months SNAP Digital Output Modules Line Voltage - Range Logic Side Ratings Module Ratings Lifetime Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1144-110428 Lifetime DATA SHEET Lifetime PAGE 9 SNAP Digital Output Modules Specifications--DC Modules (continued) SNAP-ODC5SRCFM SNAP-ODC5SNKFM Key Feature Factory Mutual approved Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) SNAP Digital Output Modules Field Side Ratings (each channel) Line Voltage - Range 5-60 VDC 5-60 VDC Line Voltage - Nominal 5-48 VDC 5-48 VDC Current Rating 0C to 70C Ambi3 amps per module ent 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 60 VDC Fuse (Common to all Channels) 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB 250 VAC - 4A 5x20 mm Fast-acting Bell Fuse Part No. BEL 5HF4 Opto 22 Part SNAP-FUSE4AB Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Logic Side Ratings Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Module Ratings Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec 4,000 volts (transient) Temperature 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime Form 1144-110428 DATA SHEET Isolation (Field Side to Logic Side) 4,000 volts (transient) PAGE 10 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Specifications--DC Modules (continued) SNAP-ODC5-iFM SNAP-ODC5A-iFM Key Feature Four isolated channels Factory Mutual approved Four isolated channels Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Line Voltage - Range 5-60 VDC 5-200 VDC Line Voltage - Nominal 5-48 VDC 5-200 VDC Current Rating 0C to 70C Ambient 3 amps per module 3 amps per module Surge Current 5 amps peak for 1 second 5 amps peak for 1 second Minimum Load 20 mA 20 mA Output Voltage Drop 1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps Off-state Leakage 1 mA @ 60 VDC 1 mA @ 60 VDC Peak Blocking Voltage 60 VDC 200 VDC Fuse (Common to all Channels) Has four isolated channels. Has four isolated channels. User must provide own fusing. User must provide own fusing. Field Side Ratings (each channel) Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC 0.25 VDC 5 VDC 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum SNAP Digital Output Modules Logic Side Ratings Module Ratings Number of Channels Per Module 4 4 Turn-on Time 100 usec 100 usec Turn-off Time 750 usec 750 usec Isolation (Field Side to Logic Side) 4,000 volts (transient) 4,000 volts (transient) Temperature 0 to 70 C, operating -30 to 85 C, storage 0 to 70 C, operating -30 to 85 C, storage Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty Lifetime Lifetime Form 1144-110428 (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 11 SNAP Digital Output Modules Schematics Part Number Description SNAP-ODC5SRC 4-channel DC output 5-60 VDC logic source SNAP-ODC5SRCFM 4-channel DC output 5-60 VDC logic source, Factory Mutual approved Form 1144-110428 DATA SHEET SNAP Digital Output Modules SNAP-ODC5SRC Output Module-- Sourcing PAGE 12 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Schematics SNAP-ODC5SNK and SNAP-ODC5ASNK Output Modules--Sinking Part Number Description SNAP-ODC5SNK 4-channel DC output 5-60 VDC logic sink SNAP-ODC5SNKFM 4-channel DC output 5-60 VDC logic sink, Factory Mutual approved SNAP-ODC5ASNK 4-channel DC output 5-200 VDC logic sink SNAP Digital Output Modules Form 1144-110428 (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 13 SNAP Digital Output Modules Schematics Part Number Description SNAP-ODC5MA 4-channel isolated DC output 5-60 VDC, 5 VDC logic, with manual/auto switches Form 1144-110428 DATA SHEET SNAP Digital Output Modules SNAP-ODC5MA Output Module with Manual/Auto Switches PAGE 14 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Schematics SNAP-ODC5-i and SNAP-ODC5A-i Isolated Output Module Description SNAP-ODC5-i 4-channel isolated DC output 5-60 VDC, 5 VDC logic SNAP-ODC5A-i 4-channel isolated DC output 5-200 VDC, 5 VDC logic SNAP-ODC5-iFM 4-channel isolated DC output 5-60 VDC, 5 VDC logic, Factory Mutual approved SNAP-ODC5A-iFM 4-channel isolated DC output 5-200 VDC, 5 VDC logic, Factory Mutual approved SNAP Digital Output Modules Part Number Form 1144-110428 (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 15 SNAP Digital Output Modules Dimensional Drawing Form 1144-110428 DATA SHEET SNAP Digital Output Modules All Models Except MA PAGE 16 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Dimensional Drawing All MA Models SNAP Digital Output Modules Form 1144-110428 (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 17 SNAP Digital Output Modules Dimensional Drawing SNAP Digital Output Modules All Models Form 1144-110428 DATA SHEET IMPORTANT: The mounting rack connector has 24 pins; the module connector has 20 pins. The extra pins on the mounting rack connector prevent misalignment of the module during installation. PAGE 18 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP Digital Output Modules Dimensional Drawing All Models SNAP Digital Module Mounted on SNAP Rack SNAP Digital Output Modules Form 1144-110428 (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 19 More About Opto 22 Products SNAP PAC Brains Opto 22 develops and manufactures reliable, flexible, easy-touse hardware and software products for industrial automation, remote monitoring, and data acquisition applications. SNAP PAC System Designed to simplify the typically complex process of understanding, selecting, buying, and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, multidomain, modular controllers based on open standards and providing an integrated development environment. Opto 22 has been manufacturing PACs for many years. The latest models include the standalone SNAP PAC S-series and the rack-mounted SNAP PAC R-series. Both handle a wide range of digital, analog, and serial functions and are equally suited to data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system without the expense and limitations of proprietary networks and protocols. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured and cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software to power your SNAP PAC System. These fully integrated software applications share a single tagname database, so the data points you configure in PAC ControlTM are immediately available for use in PAC DisplayTM, OptoOPCServerTM, and OptoDataLinkTM. Commands are in plain English; variables and I/O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds OptoOPCServer, OptoDataLink, options for Ethernet link redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, serial, and special-purpose modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974 and with over 85 million devices sold, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we do no statistical testing and each part is tested twice before leaving our factory, we can guarantee most solidstate relays and optically isolated I/O modules for life. Free Product Support Opto 22's Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Product support is available in English and Spanish, by phone or email, Monday through Friday, 7 a.m. to 5 p.m. PST. Free Customer Training Hands-on training classes for the SNAP PAC System are offered at our headquarters in Temecula, California. Each student has his or her own learning station; classes are limited to nine students. Registration for the free training class is on a firstcome, first-served basis. See our website, www.opto22.com, for more information or email training@opto22.com. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-090113 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.