TQ Leading the market, our 5 mm 2-pole surface mount relays comply with JIS C0806 FEATURES 1. Flat compact size 14.0(L) 9.0(W) 5.0(H) .551(L) .354(W) .197(H) 2. Nominal operating power: High sensitivity of 140mW (2 Form C single side stable type) By using the highly efficient polar magnetic circuit "seesaw balance mechanism", a nominal operating power of 140 mW (minimum operating power of 79 mW) has been achieved (4 Form C single side stable type is 280 mW). 3. Suitable for SMD automatic insertion (SA type) With a height of 5.6 mm .220 inch, the relays meet JIS C 0806 specifications. 4. High density mounting possible High-efficiency magnetic circuits ensure low magnetic flux leakage. Because characteristics are little changed by proximity mounting, highdensity mounting is possible. 5. The use of gold-clad twin crossbar contacts ensures high contact reliability. 6. DIL terminal array enables use of IC sockets. 7. Low thermal electromotive force As well as low power consumption of 140 mW, use of a structure with separate coil and contact sections has reduced thermal electromotive force to the low level of approximately 5 V. Surface mount types achieve approximately 2 V. TQ RELAYS 8. Latching types also available 9. Self-clinching terminal also available 10. A range of surface-mount types also available SA: Low-profile surface-mount terminal type SL: High connection reliability surfacemount terminal type SS: Space saving surface-mount terminal type 11. M.B.B. contact types available TYPICAL APPLICATIONS 1. Communications 2. Measurement equipment 3. OA equipment 4. Industrial machines ORDERING INFORMATION TQ 2 Contact arrangement 2: 2 Form C 4: 4 Form C Terminal shape Nil: Standard PC board terminal H: Self-clinching terminal SA: SA type SL: SL type SS: SS type Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching MBB function Nil: Standard (B.B.M.) type 2M: 2M.B.B. type Nominal coil voltage (DC)* 1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V Packing style Nil: Tube packing X: Tape and reel (picked from 1/2/3/4/5-pin side) Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side) Notes: 1. *48 V coil type: Single side stable only 2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. ds_61020_en_tq: 010611J 1 TQ TYPES Standard PC board terminal and self-clinching terminal 1. Standard (B.B.M.) type 1) Standard PC board terminal Contact arrangement 2 Form C 4 Form C Nominal coil voltage 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2-3V TQ2-4.5V TQ2-5V TQ2-6V TQ2-9V TQ2-12V TQ2-24V TQ2-48V TQ4-3V TQ4-4.5V TQ4-5V TQ4-6V TQ4-9V TQ4-12V TQ4-24V TQ4-48V 1 coil latching Part No. TQ2-L-3V TQ2-L-4.5V TQ2-L-5V TQ2-L-6V TQ2-L-9V TQ2-L-12V TQ2-L-24V -- TQ4-L-3V TQ4-L-4.5V TQ4-L-5V TQ4-L-6V TQ4-L-9V TQ4-L-12V TQ4-L-24V -- 2 coil latching Part No. TQ2-L2-3V TQ2-L2-4.5V TQ2-L2-5V TQ2-L2-6V TQ2-L2-9V TQ2-L2-12V TQ2-L2-24V -- TQ4-L2-3V TQ4-L2-4.5V TQ4-L2-5V TQ4-L2-6V TQ4-L2-9V TQ4-L2-12V TQ4-L2-24V -- 1 coil latching Part No. TQ2H-L-3V TQ2H-L-4.5V TQ2H-L-5V TQ2H-L-6V TQ2H-L-9V TQ2H-L-12V TQ2H-L-24V -- TQ4H-L-3V TQ4H-L-4.5V TQ4H-L-5V TQ4H-L-6V TQ4H-L-9V TQ4H-L-12V TQ4H-L-24V -- 2 coil latching Part No. TQ2H-L2-3V TQ2H-L2-4.5V TQ2H-L2-5V TQ2H-L2-6V TQ2H-L2-9V TQ2H-L2-12V TQ2H-L2-24V -- TQ4H-L2-3V TQ4H-L2-4.5V TQ4H-L2-5V TQ4H-L2-6V TQ4H-L2-9V TQ4H-L2-12V TQ4H-L2-24V -- Standard packing (2 Form C): Tube: 50 pcs.; Case: 1,000 pcs. Standard packing (4 Form C): Tube: 25 pcs.; Case: 500 pcs. 2) Self-clinching terminal Contact arrangement 2 Form C 4 Form C Nominal coil voltage 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2H-3V TQ2H-4.5V TQ2H-5V TQ2H-6V TQ2H-9V TQ2H-12V TQ2H-24V TQ2H-48V TQ4H-3V TQ4H-4.5V TQ4H-5V TQ4H-6V TQ4H-9V TQ4H-12V TQ4H-24V TQ4H-48V Note: Types ("-3" to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load. 2. M.B.B. type 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TQ2-2M-3V TQ2-2M-4.5V TQ2-2M-5V TQ2-2M-6V TQ2-2M-9V TQ2-2M-12V TQ2-2M-24V Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2 ds_61020_en_tq: 010611J TQ 2) Self-clinching terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TQ2H-2M-3V TQ2H-2M-4.5V TQ2H-2M-5V TQ2H-2M-6V TQ2H-2M-9V TQ2H-2M-12V TQ2H-2M-24V Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. Notes: 1. Latching types are available by request. Please consult us for details. 2. UL/CSA approved (UL file No.:E 43149, CSA file No.: LR26550) 3. Types ("-1" to the end of part No.) designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load and low thermal power. Surface-mount terminal 1) Tube packing Contact arrangement 2c 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC Single side stable Part No. TQ2S-1.5V TQ2S-3V TQ2S-4.5V TQ2S-5V TQ2S-6V TQ2S-9V TQ2S-12V 24V DC 48V DC TQ2S-24V TQ2S-48V Nominal coil voltage 1 coil latching Part No. TQ2S-L-1.5V TQ2S-L-3V TQ2S-L-4.5V TQ2S-L-5V TQ2S-L-6V TQ2S-L-9V 2 coil latching Part No. TQ2S-L2-1.5V TQ2S-L2-3V TQ2S-L2-4.5V TQ2S-L2-5V TQ2S-L2-6V TQ2S-L2-9V TQ2S-L-12V TQ2S-L-24V -- TQ2S-L2-12V TQ2S-L2-24V -- : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tube: 50 pcs.; Case: 1,000 pcs. 2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 48V DC Single side stable Part No. TQ2S-1.5V-Z TQ2S-3V-Z TQ2S-4.5V-Z TQ2S-5V-Z TQ2S-6V-Z TQ2S-9V-Z TQ2S-12V-Z TQ2S-24V-Z TQ2S-48V-Z 1 coil latching Part No. TQ2S-L-1.5V-Z TQ2S-L-3V-Z TQ2S-L-4.5V-Z TQ2S-L-5V-Z TQ2S-L-6V-Z TQ2S-L-9V-Z TQ2S-L-12V-Z TQ2S-L-24V-Z -- 2 coil latching Part No. TQ2S-L2-1.5V-Z TQ2S-L2-3V-Z TQ2S-L2-4.5V-Z TQ2S-L2-5V-Z TQ2S-L2-6V-Z TQ2S-L2-9V-Z TQ2S-L2-12V-Z TQ2S-L2-24V-Z -- : For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Note: Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/2/3/4-pin side) is also available. RATING Standard PC board terminal and self-clinching terminal 1. Coil data [Standard (B.B.M.) type] 1) Single side stable (2 Form C) Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 3V DC 46.7mA 64.3 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 31.1mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 144.6 178 257 579 1,028 2,880 6.25mA 7,680 75%V or less of nominal voltage* (Initial) 48V DC ds_61020_en_tq: 010611J 10%V or more of nominal voltage* (Initial) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 200mW 300mW 120%V of nominal voltage 3 TQ 2) 1 coil latching (2 Form C) 3V DC Nominal operating current [10%] (at 20C 68F) 33.3mA 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 22.2mA 20mA 16.7mA 11.1mA 8.3mA 6.3mA 202.5 250 360 810 1,440 3,840 150mW Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Nominal coil voltage Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 100mW 150%V of nominal voltage 90 3) 2 coil latching (2 Form C) Nominal coil voltage Set voltage (at 20C 68F) Reset voltage (at 20C 68F) 3V DC Set coil 66.7mA Reset coil 66.7mA Set coil 45 Reset coil 45 4.5V DC 5V DC 6V DC 9V DC 12V DC 44.4mA 40mA 33.3mA 22.2mA 16.7mA 44.4mA 40mA 33.3mA 22.2mA 16.7mA 101.2 125 180 405 720 101.2 125 180 405 720 12.5mA 12.5mA 1,920 1,920 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 24V DC Max. applied voltage (at 20C 68F) Set coil Reset coil 200mW 200mW 150%V of nominal voltage 300mW 300mW 120%V of nominal voltage 4) Single side stable (4 Form C) 3V DC Nominal operating current [10%] (at 20C 68F) 93.8mA 4.5V DC 5V DC 6V DC 9V DC 62.2mA 56.2mA 46.5mA 31.1mA 72.3 89 129 289 23.3mA 11.7mA 514 2,056 8.3mA 5,760 400mW 120%V of nominal voltage Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 66.6mA 44.4mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA 45 101.2 125 180 405 720 2,880 200mW 150%V of nominal voltage Reset voltage (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Set coil Reset coil Coil resistance [10%] (at 20C 68F) Nominal operating power Nominal coil voltage 12V DC 24V DC Pick-up voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Drop-out voltage (at 20C 68F) 10%V or more of nominal voltage* (Initial) 48V DC Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 280mW 150%V of nominal voltage 32 5) 1 coil latching (4 Form C) Nominal coil voltage 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 6) 2 coil latching (4 Form C) Nominal coil voltage Set voltage (at 20C 68F) 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) Set coil Reset coil 133mA 133mA 22.5 22.5 88.9mA 80mA 66.6mA 44.4mA 33.3mA 16.7mA 88.9mA 80mA 66.6mA 44.4mA 33.3mA 16.7mA 50.6 62.5 90 202.5 360 1,440 50.6 62.5 90 202.5 360 1,440 Set coil Reset coil 400mW 400mW Max. applied voltage (at 20C 68F) 150%V of nominal voltage *Pulse drive (JIS C 5442-1986) 4 ds_61020_en_tq: 010611J TQ [M.B.B. type] 3V DC Nominal operating current [10%] (at 20C 68F) 66.7mA 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 44.4mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 200mW 150%V of nominal voltage 45 101 125 180 405 720 2,880 *Pulse drive (JIS C 5442-1986) 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*2 Single side stable Nominal operating power 1 coil latching 2 coil latching Insulation resistance (Initial) Between open contacts Electrical characteristics Breakdown voltage (Initial) Between contact and coil Between contact sets Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Expected life Conditions Shock resistance Functional Destructive Functional Destructive Mechanical (at 180 cpm) Vibration resistance Electrical (at 20 cpm) Conditions for operation, transport and storage*3 Max. operating speed (at rated load) Unit weight Specifications 2 Form C, 2 Form D (M.B.B.) 4 Form C Max. 50m (By voltage drop 6 V DC 1A) Ag+Au clad 1 A 30 V DC, 0.5 A 125 V AC*1 (resistive load) 30 W (DC), 62.5 V A (AC)*1 (resistive load) 110 V DC, 125 V AC*1 1A 10A 10mV DC Standard (B.B.M) type: 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) 280 mW (3 to 24 V DC), 400 mW (48 V DC) M.B.B. type: 200 mW 100 mW (3 to 12 V DC), 150 mW (24 V DC) 200 mW 200 mW (3 to 12 V DC), 300 mW (24 V DC) 400 mW Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Standard (B.B.M) type: 750 Vrms for 1min. (Detection current: 10 mA), M.B.B. type: 300 Vrms for 1 min. (Detection current: 10 mA) 1,000 Vrms for 1min. (Detection current: 10 mA) 1,000 Vrms for 1min. (Detection current: 10 mA) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107 Standard (B.B.M) type: Min. 2105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) M.B.B. type: Min. 105 (1 A 30 V DC resistive) Standard (B.B.M) type: Ambient temperature: -40C to +70C -40F to +158F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) M.B.B. type: Ambient temperature: -40C to +50C -40F to +122F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1.5 g .053 oz Approx. 3 g .106 oz. Notes: *1 AC is standard (B.B.M) type only. *2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level]) *3 Refer to "6. Usage, Storage and Transport Conditions" in AMBIENT ENVIRONMENT section in Relay Technical Information. ds_61020_en_tq: 010611J 5 TQ Surface-mount terminal 1. Coil data 1) Single side stable Nominal coil voltage Pick-up voltage (at 20C 68F) Drop-out voltage (at 20C 68F) Nominal operating current (at 20C 68F) Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 140mW 150%V of nominal voltage 1.5V DC 93.8mA 16 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA 64.3 145 178 257 579 1,028 2,880 6.3mA 7,680 300mW 120%V of nominal voltage Coil resistance [10%] (at 20C 68F) Nominal operating power Max. applied voltage (at 20C 68F) 70mW 150%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 48V DC 200mW 2) 1 coil latching 1.5V DC Nominal operating current (at 20C 68F) 46.9mA 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 23.3mA 15.6mA 14mA 11.7mA 7.8mA 5.8mA 4.2mA Nominal coil voltage Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 32 128.6 289.3 357 514 1,157 2,057 5,760 100mW Coil resistance [10%] (at 20C 68F) Nominal operating power 3) 2 coil latching 1.5V DC Nominal operating current (at 20C 68F) Set coil Reset coil 93.8mA 93.8mA 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA Nominal coil voltage Set voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) Reset voltage (at 20C 68F) 75%V or less of nominal voltage* (Initial) 46.7mA 31mA 28.1mA 23.3mA 15.5mA 11.7mA 8.3mA Set coil 16 Reset coil 16 64.3 145 178 257 579 1,028 2,880 64.3 145 178 257 579 1,028 2,880 Set coil Reset coil 140mW 140mW 200mW 200mW Max. applied voltage (at 20C 68F) 150%V of nominal voltage *Pulse drive (JIS C 5442-1986) 6 ds_61020_en_tq: 010611J TQ 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Nominal operating power Specifications 2 Form C Max. 75 m (By voltage drop 6 V DC 1A) AgNi type+Au clad 2 A 30 V DC, 0.5 A 125 V AC (resistive load) 60 W (DC), 62.5 VA (AC) (resistive load) 220 V DC, 125 V AC 2A 10A 10mV DC Single side stable 1 coil latching 2 coil latching 140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC) 70 mW (1.5 to 12 V DC), 100 mW (24 V DC) 140 mW (1.5 to 12 V DC), 200 mW (24 V DC) Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Shock resistance Functional Destructive Vibration resistance Functional Destructive Mechanical characteristics Mechanical Expected life Conditions Electrical Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Min. 1,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 1,000 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 Vrms for 1 min. (Detection current: 10 mA) 1,500 V (10160s) (FCC Part 68) 2,500 V (210s) (Bellcore) Max. 50C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.) Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 5 mm Min. 108 (at 180 cpm) Min. 105 (2 A 30 V DC resistive), Min. 2105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm) Ambient temperature: -40C to +85C -40F to +185F, Max. -40C to +70C (2A) Max. -40F to +158F (2A); Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 2 g .071 oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (SX relays are available for low level load switching [10V DC, 10mA max. level]) *2 Refer to "6. Usage, Storage and Transport Conditions" in AMBIENT ENVIRONMENT section in Relay Technical Information. REFERENCE DATA Standard PC board terminal and self-clinching terminal 1. Maximum switching capacity 2. Life curve 3. Mechanical life 1.0 0.5 0.4 0.3 30 V DC resistive load 100 125 V AC resistive load 10 0.2 30 100 200 Switching voltage,V ds_61020_en_tq: 010611J 0 0.5 1.0 Switching current, A Ratio against the rated voltage, %V DC load (cos=1) AC load (cos=1) No. of operations, x104 Switching current, A Tested sample: TQ2-12V, 10 pcs. 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 Drop-out voltage 30 Max. 20 Min. 10 0 10 100 1,000 10,000 No. of operations, x104 7 TQ 4.-(1) Electrical life (DC load) 4.-(2) Electrical life (AC load) Tested sample: TQ2-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 20 cpm Tested sample: TQ2-12V, 6 pcs. Condition: 0.5 A 125 V AC resistive load, 20 cpm Change of contact resistance 100 90 90 Pick-up voltage Max. 70 Min. 60 50 40 Drop-out voltage Max. 30 20 Min. 80 70 60 50 0 5 10 15 No. of operations, x104 Min. 30 20 0 20 Change of contact resistance 5 10 15 No. of operations, x104 70 60 50 40 Max. 30 Min. Pick-up voltage 70 Max. Min. 60 50 40 Drop-out voltage Max. 30 Min. 20 10 0 5 No. of operations, x104 10 6. Ambient temperature characteristics Tested sample: TQ2-12V, 5 pcs. Temperature rise, C 80 80 5. Coil temperature rise (2C) 70 90 20 90 Tested sample: TQ2-12V Measured portion: Inside the coil Ambient temperature: 30C 86F 100 Contact resistance, m Max. 40 10 10 Nominal coil voltage 3 to 12 V DC type 24 V DC type 60 50 1A 40 1A 0A 40 30 Drop-out 20 voltage x x 10 -40 -20 Pick-up voltage 20 40 60 80 Ambient -10 temperature,C 0 30 20 -20 20 10 10 -30 0 5 No. of operations, x104 0 10 100 -40 100 110 120 130 140 150 Coil applied voltage, %V 7.-(2) High-frequency characteristics (Insertion loss) Insertion loss, dB 7.-(1) High-frequency characteristics (Isolation) Isolation, dB 100 Variation ratio,% 80 Change of pick-up and drop-out voltage Ratio against the rated voltage, %V 100 Contact resistance, m Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 8. Malfunctional shock (single side stable) Tested sample: TQ2-12V, 6 pcs. , ,Z XX Y Z 980m/s2 Y, Y Deenergized condition Energized condition 980m/s2 Z 980m/s2 980m/s2 , Z 980m/s2 , X X 1.0 0.8 0.6 50 0.4 0.2 10 100 Frequency, MHz 0 1,000 9.-(1) Influence of adjacent mounting 10 100 Frequency, MHz 980m/s , Y 1,000 9.-(2) Influence of adjacent mounting 2 10. Contact reliability (1 mA 5 V DC resistive load) 10 Pick-up voltage ON -10 ON OFF OFF 10 Drop-out voltage 0 OFF -10 0 8 ON 0 5 .197 Inter-relay distance Rate of change, % Rate of change, % Rate of change, % Rate of change, % Tested sample: TQ2-12V Condition: Detection level 10 W 10 0 ON -10 F(t), % 99.9 99.0 95.0 70.0 50.0 30.0 ON 10 Drop-out voltage OFF 0 OFF -10 OFF 0 , mm inch Pick-up voltage ON 5 .197 Inter-relay distance , mm inch 10.0 5.0 2.0 1.0 0.5 0.2 0.1 1.0 m=2.15 =2.7x107 95% reliability limit = 7.6x106 (Weibull probability paper) 10 100 No. of operations, x106 ds_61020_en_tq: 010611J TQ 11. Actual load test (35 mA 48 V DC wire spring relay load) Change of pick-up and drop-out voltage 220 57 V DC 220 100 90 90 Wire spring relay Circuit diagram Pick-up voltage 70 Max. Min. 60 50 40 30 Drop-out voltage Max. Min. 20 80 70 60 50 40 Max. 30 Min. 20 10 10 10 20 30 40 No. of operations, x104 0 50 10 20 30 40 No. of operations, x104 50 Change of contact resistance 100 90 80 Pick-up voltage Max. Min. 70 60 50 40 30 Contact resistance, m 100 Ratio against the rated voltage, %V 80 0 12. 0.1 A 53 V DC resistive load test Change of pick-up and drop-out voltage Change of contact resistance 100 Ratio against the rated voltage, %V 20Hz Contact resistance, m Circuit Drop-out voltage 20 0 500 1,000 1,500 80 70 60 Max. 50 40 30 Min. 20 Max. Min. 10 90 10 2,000 0 500 1,000 1,500 2,000 No. of operations, x104 No. of operations, x104 13. Distribution of M.B.B. time Tested sample: TQ2-2M-5V, 85 pcs. 50 40 30 26 21 19 15 20 Terminal Nos. 2-3-4: ON - x: 105.6 s 3n-1: 163.8 s Min.: 23 s Max.: 243 s Terminal Nos. 7-8-9: ON - x: 115.6 s 3n-1: 167.3 s 30 Min.: 35 s Max.: 254 s 19 60 50 41 40 35 31 30 27 20 17 12 11 10 250 300 350 s max. 100 150 ~ 200 2 50 ~ ~ 150 1 10 ~ ~ 100 0 7 4 ~ ~ 50 300 s min. 10 200 250 300 s min. 50 100 150 200 250 300 350 s max. ~ 100 150 ~ 50 ~ 10 2 4 200 250 ~ 0 ~ 6 ~ 10 Terminal Nos. 2-3-4: OFF - x: 71.6 s 3n-1: 127.1 s Min.: 17 s Max.: 187 s Terminal Nos. 7-8-9: OFF - x: 80.7 s 3n-1: 156.7 s Min.: 29 s Max.: 298 s ~ 60 Surface-mount terminal 1. Maximum switching capacity 2. Life curve 3. Mechanical life (mounting by IRS method) 2.0 No. of operations, x 104 Switching current, A 3.0 100 DC resistive load 1.0 AC resistive load 0.5 0.4 0.3 50 30 125V AC resistive load 30V DC resistive load 20 10 0.2 Ratio against the rated voltage, %V Tested sample: TQ2SA-12V, 10 pcs. 100 90 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. 10 0 20 30 50 100 200 300 Contact voltage, V ds_61020_en_tq: 010611J 0 1.0 2.0 Switching current, A 0 IRS 1 10 100 1,000 10,000 4 No. of operations, x10 9 TQ 4.-(1) Electrical life (2 A 30 V DC resistive load) 4.-(2) Electrical life (0.5 A 125 V AC resistive load) Tested sample: TQ2SA-12V, 6 pcs. Operating speed: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method) Tested sample: TQ2SA-12V, 6 pcs Operating speed: 20 cpm Change of pick-up and drop-out voltage (mounting by IRS method) Change of contact resistance (mounting by IRS method) 80 Pick-up voltage 70 Max. Min. 60 50 40 Drop-out voltage 30 Max. 20 80 70 60 50 40 Min. 30 10 IRS 1 2 IRS 1 3 4 5 6 7 8 9 10 No. of operations, x104 Change of contact resistance (mounting by IRS method) 2 0A 50 2A 40 0A 30 20 20 3 4 5 6 7 8 No. of operations, x10 7. Ambient temperature characteristics 0 Rate of change, % Tested sample: TQ2SA-12V, 5 pcs. -40 -20 0 9 10 Min. 2 IRS 1 3 4 5 6 7 8 9 10 No. of operations, x104 Operate time Release time 4 Max. Min. 3 2 Max. Min. 0 100 110 120 130 140 150 Coil applied voltage, %V 4 8.-(1) High-frequency characteristics (Isolation) 70 80 100 110 120 90 Coil applied voltage, %V 8.-(2) High-frequency characteristics (Insertion loss) 40 20 Pick-up voltage x Drop-out voltage 20 40 60 80 Ambient temperature, C -20 Insertion loass, dB 2 Isolation, dB IRS 1 Max. 20 1 10 10 0 Drop-out voltage 30 5 2A Coil voltage DC 12V type DC 48V type 60 Min. 30 40 6. Operate/release time Operate and release time, ms Max. 40 Min. 50 Tested sample: TQ2SA-12V, 6 pcs. Temperature rise, C 50 Max. 60 0 3 4 5 6 7 8 9 10 No. of operations, x104 70 60 Pick-up voltage 70 Tested sample: TQ2SA-12V, 6 pcs. Point measured: Inside the coil Ambient temperature: 25C 77F 90 70 80 5. Coil temperature rise 100 80 90 10 0 0 Contact resistance, m Max. 20 Min. 10 100 Ratio against the rated voltage, %V 90 Contact resistance, m 100 90 Ratio against the rated voltage, %V 100 100 1.0 0.8 0.6 50 0.4 0.2 -40 10 100 Frequency, MHz 10 1,000 100 Frequency, MHz 1,000 10.-(2) Influence of adjacent mounting Tested sample: TQ2SA-12V, 5 pcs. Tested sample: TQ2SA-12V, 6 pcs. X' Y 1000m/s 2 Deenergized condition Energized condition X 1000m/s2 Z' 1000m/s 2 1000m/s 2 Z 1000m/s 2 X' 1000m/s 2 Y' 10 ON 0 ON -10 OFF OFF 10 Drop-out voltage 0 OFF -10 0 10 ON Pick-up voltage 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch Rate of change, % Z X Rate of change, % Z' Y Y' Rate of change, % 10.-(1) Influence of adjacent mounting Tested sample: TQ2SA-12V, 6 pcs Rate of change, % 9. Malfunctional shock (single side stable) ON 10 Pick-up voltage 0 ON -10 ON OFF 10 Drop-out voltage 0 OFF -10 0 OFF 1 2 3 4 5 6 .039 .079 .118 .157 .197 .236 Inter-relay distance , mm inch ds_61020_en_tq: 010611J TQ 11. Pulse dialing test Change of pick-up and drop-out voltage (mounting by IRS method) 458 0.08 F 48 V DC 0.08 F TQ-SMD 3 relay 2 - 458 Wire spring relay Change of contact resistance (mounting by IRS method) 100 100 90 90 Contact resistance, m + Ratio against the rated voltage, %V (35 mA 48 V DC wire spring relay load) Tested sample: TQ2SA-12V, 6 pcs. Circuit 80 Pick-up voltage 70 Max. 60 Min. 50 40 Drop-out voltage 30 Max. 20 Min. 70 60 50 40 Max. 30 Min. 20 10 10 0 80 IRS 10 20 30 40 No. of operations, x104 0 50 DIMENSIONS (mm inch) IRS 20 30 40 No. of operations, x104 50 CAD Data Data from our Web site. Download CAD 1. Standard PC board terminal and Self-clinching terminal 1) 2 Form C External dimensions CAD Data PC board pattern (Bottom view) Standard PC board terminal (4.75) (.187) 14 .551 2.54 .100 9 .354 10.16 .400 10-1.0 dia. 10-.039 dia. 5 +0.4 -0.2 .197 +.016 -.008 2.54 .100 7.62 .300 3.5 .138 0.25 .010 2.54 .100 0.5 .020 7.62 .300 0.25 .010 Tolerance: 0.1 .004 Schematic (Bottom view) Self-clinching terminal (4.75) (.187) 14 .551 Single side stable 9 .354 + 5 +0.4 -0.2 .197 +.016 -.008 3.5 .138 0.25 .010 2.54 .100 0.5 .020 7.62 .300 General tolerance: 0.3 .012 ds_61020_en_tq: 010611J 10 0.25 .010 1 2 3 4 5 - 1-coil latching - 1 2 3 4 2-coil latching 5 8 7 6 2 3 4 10 9 8 7 Direction indication Direction indication (Deenergized condition) (Reset condition) 6 10 9 5 - - + + 10 9 1 + 8 7 6 Direction indication (Reset condition) 11 TQ 2) 4 Form C External dimensions CAD Data PC board pattern (Bottom view) Standard PC board terminal 26.7 1.051 (4.75) (.187) 22.86 .900 2.54 .100 5.08 .200 9 .354 16-1.0 dia. 16-.039 dia. 5 +0.4 -0.2 .197 +.016 -.008 2.54 .100 7.62 .300 3.5 .138 0.25 .010 5.08 .200 0.5 .020 2.54 .100 7.62 .300 0.25 .010 Tolerance: 0.1 .004 Self-clinching terminal 26.7 1.051 (4.75) (.187) Schematic (Bottom view) 9 .354 Single side stable 5 +0.4 -0.2 .197 +.016 -.008 + 3.5 .138 0.25 .010 5.08 .200 0.5 .020 2.54 .100 7.62 .300 0.25 .010 1 3 4 5 6 7 8 10 20 181716 151413 11 1-coil latching - Direction indication (Deenergized condition) General tolerance: 0.3 .012 - 2-coil latching 1 3 4 5 6 7 8 10 20 181716 151413 11 1 3 4 5 6 7 8 10 - + 20 181716 151413 11 - + + Direction indication Direction indication (Reset condition) (Reset condition) 2. Surface-mount terminal CAD Data External dimensions (General tolerance: 0.3 .012) Type 14 .551 1 .039 9 .354 5.6 .220 SA type 2.54 .100 0.25 .010 4.9 .193 14 .551 Max.7.5 .295 1 .039 0.25 .010 4.9 .193 14 .551 9.56 .376 9 .354 Max.7.5 .295 SS type 2.54 .100 1.84 .072 8.46 .333 7.62 .300 9.30.5 .366.020 0.5 .020 2.54 .100 1 .039 0.25 .010 4.9 .193 2.54 .100 2.94 .116 7.62 .300 11.50.5 .453.020 0.5 .020 2.54 .100 9.56 .376 14 .551 9 .354 SL type 2.54 .100 2.94 .116 7.62 .300 11.50.5 .453.020 0.2 .008 0.5 .020 Suggested mounting pad (Top view) (Tolerance: 0.1 .004) Schematic (Top view) Single side stable - 10 9 8 7 6 + 1-coil latching + 10 9 8 7 6 2 3 4 5 10 9 8 7 + 1 2 3 4 Direction indication Direction indication (Deenergized condition) (Reset condition) 5 1 6 - - + - 1 12 2-coil latching 2 3 4 5 Direction indication (Reset condition) ds_61020_en_tq: 010611J TQ NOTES 1. Packing style 1) The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1) stripe Stopper (gray) Stopper (green) 2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions (i) SA type 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 9.8 N {1 kgf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less A C B mm inch 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 4.0 .157 1.75 .069 14.6 .575 11.5 .453 0.2 .008 6.3 .248 16.0 .630 TQ-SMD relays 12.3 24.0 0.3 .484 .945 .012 Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. Tape coming out direction (ii) SL, SS type mm inch 0.4 .016 Relay polarity bar 2.0 (Z type) 1.5 +0.1 0 dia. .079 .059 +.004 dia. 0 1.75 4.0 .069 .157 14.6 .575 11.5 .453 7.8 0.2 .307 .008 16.0 .630 TQ-SMD relays Note) *SS type 12.3 24.0 0.3 .484 .945 .012 (10.1 .398)* Tape coming out direction (2) Dimensions of plastic reel mm inch 21 dia. .827 dia. 2.0 .079 80 1 dia. 3.150 .039 dia. 330 2 dia. 12.992 .079 dia. 13 dia. .512 dia. For Cautions for Use, see Relay Technical Information. ds_61020_en_tq: 010611J 13