TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 0.45- QUAD SPDT ANALOG SWITCH QUAD-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER WITH TWO CONTROLS FEATURES APPLICATIONS * * * * * * * * * * * * * * * * * * 15 14 13 1 12 2 11 3 10 4 9 6 7 NC2 16 15 13 14 1 12 COM1 GND 2 11 NO1 NO3 3 10 V+ COM3 4 9 8 NC2 GND NO3 COM3 5 COM4 NO4 IN3-4 NC3 NC1 16 NC1 IN1-2 NO2 COM2 5 6 7 8 COM4 IN1-2 NC1 COM1 NO1 V+ NC4 COM4 NO4 NO2 IN1-2 16 15 14 13 12 11 10 9 NO4 1 2 3 4 5 6 7 8 RSV PACKAGE (TOP VIEW) COM1 NO1 V+ NC4 NO2 COM2 NC2 GND NO3 COM3 NC3 IN3-4 RGT PACKAGE (TOP VIEW) IN3-4 PW PACKAGE (TOP VIEW) Cell Phones PDAs Portable Instrumentation Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Communication Circuits Modems Hard Drives Computer Peripherals Wireless Terminals and Peripherals COM2 * Specified Break-Before-Make Switching Low ON-State Resistance (<0.5 ) Control Inputs Are 1.8-V Logic Compatible Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 4.3-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 - 2000-V Human-Body Model (A114-B, Class II) - 1000-V Charged-Device Model (C101) NC3 1 NC4 DESCRIPTION/ORDERING INFORMATION The TS3A44159 is a quad single-pole double-throw (SPDT) analog switch with two control inputs, which is designed to operate from 1.65 V to 4.3 V. This device is also known as a dual double-pole double-throw (DPDT) configuration. It offers low ON-state resistance and excellent ON-state resistance matching with the break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to another. The device has an excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2007-2008, Texas Instruments Incorporated TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com ORDERING INFORMATION TA PACKAGE -40C to 85C (1) (2) (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING RGT - QFN Tape and reel TS3A44159RGTR ZWH RSV - QFN Tape and reel TS3A44159RSVR ZWH PW - TSSOP Tape and reel TS3A44159PWR YC4159 Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. SUMMARY OF CHARACTERISTICS (1) Quad 2:1 Multiplexer/Demultiplexer (4 x SPDT or 2 x DPDT) Configuration Number of channels 4 ON-state resistance (ron) 0.45 (max) ON-state resistance match (ron) 0.07 (max) ON-state resistance flatness (rON(flat)) 0.1 (max) Turn-on/turn-off time (tON/tOFF) 23 ns/32 ns Break-before-make time (tBBM) 30 ns Charge injection (QC) 139 pC Bandwidth (BW) 35 MHz OFF isolation (OISO) -71 dB Crosstalk (XTALK) -73 dB Total harmonic distortion (THD) 0.003% 0.4 A Power-supply current (I+) Package option (1) 16-pin QFN V+ = 4.3 V, TA = 25C FUNCTION TABLE NC TO COM, COM TO NC NO TO COM, COM TO NO L ON OFF H OFF ON IN LOGIC DIAGRAM IN1-2 NC1 COM1 NO1 NC2 COM2 NO2 NC3 COM3 NO3 NC4 COM4 NO4 IN3-4 2 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 ABSOLUTE MAXIMUM RATINGS (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) -0.5 4.6 V VNC VNO VCOM Analog voltage range (3) (4) (5) -0.5 V+ + 0.5 V IK Analog port diode current INC INO ICOM ON-state switch current VI Digital input voltage range VNC, VNO, VCOM < 0 ON-state peak switch current (6) (3) (4) IIK Digital input clamp current I+ Continuous current through V+ IGND Continuous current through GND JA Package thermal impedance (7) Tstg (1) (2) (3) (4) (5) (6) (7) VNC, VNO, VCOM = 0 to V+ VI < 0 -50 mA -200 200 -400 400 -0.5 4.6 -50 -100 V mA mA PW package 108 RGT package TBD RSV package TBD -65 mA mA 100 Storage temperature range UNIT 150 C/W C Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 4.6 V maximum. Pulse at 1-ms duration <10% duty cycle The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 3 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 4.3-V SUPPLY (1) TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current NC, NO ON leakage current COM ON leakage current VCOM, VNO, VNC 0 ron VNO or VNC = 2.5 V, ICOM = -100 mA, Switch ON, See Figure 16 ron VNO or VNC = 2.5 V, ICOM = -100 mA, Switch ON, See Figure 16 VNO or VNC = 1 V, 1.5 V, 2.5 V, ICOM = -100 mA, Switch ON, See Figure 16 ron(flat) INO(OFF), INC(OFF) VNO or VNC = 0.3 V, VCOM = 3.0 V, or VNO or VNC = 3.0 V, VCOM = 0.3 V, INO(ON), INC(ON) VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 3.0 V, VCOM = Open, ICOM(ON) VNO or VNC = Open, VCOM = 0.3 V, or VNO or VNC = Open, VCOM = 3.0 V, 25C Full 0.05 0.02 4.3 V Full 4.3 V 25C See Figure 18 Full 25C See Figure 18 Full -90 -20 4.3 V 5 nA 20 90 5 20 90 -90 -20 4.3 V 5 0.1 0.1 -20 V 0.07 0.1 25C Full 0.45 0.5 4.3 V 25C See Figure 17 0.3 4.3 V 25C Full V+ nA 20 nA -90 90 4.3 V 1 V Digital Control Inputs (IN1-2, IN3-4) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 4 IIH, IIL VIN = 3.6 V or 0 Full 4.3 V 1.5 Full 4.3 V 0 25C Full 4.3 V 0.5 10 50 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 ELECTRICAL CHARACTERISTICS FOR 4.3-V SUPPLY (continued) TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 17 23 UNIT Dynamic 25C Turn-on time tON VCOM = V+, RL = 50 , CL = 35 pF Turn-off time tOFF VCOM = V+, RL = 50 , CL = 35 pF Break-before-make time tBBM VNC = VNO = V+, RL = 50 , CL = 35 pF Charge injection QC VGEN = 0, RGEN = 0, CL = 1 nF 25C 4.3 V 139 pC Full 25C Full 25C Full 4.3 V 25 12 4.3 V 4.3 V 32 35 2 9 1 30 35 ns ns ns NC, NO off capacitance CNC(OFF), CNO(OFF) VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 4.3 V 50 pF NC, NO ON capacitance CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 4.3 V 160 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 19 25C 4.3 V 160 pF 25C 4.3 V 2.5 pF Digital input capacitance CI VI = V+ or GND Bandwidth BW RL = 50 , Switch ON 25C 4.3 V 35 MHz OFF isolation OISO RL = 50 , f = 100 kHz, Switch OFF 25C 4.3 V -71 dB Crosstalk XTALK RL = 50 , f = 100 kHz, Switch ON 25C 4.3 V -73 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz 25C 4.3 V 0.003 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current I+ 25C Full 4.3 V 0.15 0.4 1.2 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 A 5 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (1) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current NC, NO ON leakage current COM ON leakage current VCOM, VNO, VNC ron ron ron(flat) 0 VNO or VNC = 2.0 V, ICOM = -100 mA, Switch ON, See Figure 16 VNO or VNC = 2.0 V, 0.8 V, ICOM = -100 mA, Switch ON, See Figure 16 VNO or VNC = 2.0 V, 0.8 V Switch ON, ICOM = -100 mA, See Figure 16 INO(OFF), INC(OFF) VNO or VNC = 0.3 V, VCOM = 3.0 V, or VNO or VNC = 3.0 V, VCOM = 0.3 V, INO(ON), INC(ON) VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 3.0 V, VCOM = Open, ICOM(ON) VNO or VNC = Open, VCOM = 0.3 V, or VNO or VNC = Open, VCOM = 3.0 V, 25C Full 0.06 0.05 3V Full 3.6 V 25C See Figure 18 Full 25C See Figure 18 Full -50 -15 3.6 V 5 nA 15 50 5 15 50 -50 -15 3.6 V 5 0.1 0.1 -15 V 0.07 0.1 25C Full 0.55 0.6 3V 25C See Figure 17 0.37 3V 25C Full V+ nA 15 nA -50 50 Full 1.25 4.3 V Full 0 0.8 V Digital Control Inputs (IN1-2, IN3-4) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 6 IIH, IIL VIN = 3.6 V or 0 25C Full 3.6 V 0.5 10 50 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 ELECTRICAL CHARACTERISTICS FOR 3.3-V SUPPLY (continued) V+ = 3 V to 3.6 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 20 38 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 , CL = 35 pF Turn-off time tOFF VCOM = V+, RL = 50 , CL = 35 pF Break-before-make time tBBM VNC = VNO = V+, RL = 50 , CL = 35 pF Charge injection QC VGEN = 0, RGEN = 0, NC, NO OFF capacitance CNC(OFF), CNO(OFF) NC, NO ON capacitance COM ON capacitance Digital input capacitance 25C 3V Full 3 V to 3.6 V 25C 3V Full 3 V to 3.6 V 40 14 34 35 ns 25C 3V 3 Full 3 V to 3.6 V 2 CL = 1 nF 25C 3V 109 pC VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 3V 51 pF CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 3V 162 pF CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 19 25C 3V 162 pF 25C 3V 2.5 pF CI VI = V+ or GND 11 ns 35 55 ns Bandwidth BW RL = 50 , Switch ON 25C 3V 35 MHz OFF isolation OISO RL = 50 , f = 100 kHz, Switch OFF 25C 3V -71 dB Crosstalk XTALK RL = 50 , f = 100 kHz, Switch ON 25C 3V -73 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz 25C 3V 0.003 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current I+ 25C Full 3.6 V 0.015 0.2 0.7 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 A 7 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness VCOM, VNO, VNC ron 0 VNO or VNC = 1.8 V, ICOM = -100 mA, 25C Full 0.45 2.3 V ron(flat) VNO or VNC = 1.8 V, 0.8 V, Switch ON, ICOM = -100 mA, See Figure 16 VNO or VNC = 1.8 V, 0.8 V ICOM = -100 mA, INO(OFF), INC(OFF) VNO or VNC = 0.3 V, VCOM = 2.3 V, or VNO or VNC = 2.3 V, VCOM = 0.3V, NC, NO ON leakage current INO(ON), INC(ON) VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 2.3 V, VCOM = Open, ICOM(ON) VNO or VNC = Open, VCOM = 0.3 V, or VNO or VNC = Open, VCOM = 2.3 V, Switch ON, See Figure 16 Full 0.045 2.3 V 0.06 2.3 V 25C See Figure 17 Full 2.7 V 25C See Figure 18 Full 25C See Figure 18 Full -20 -10 2.7 V 0.1 nA 10 20 0.1 10 20 -20 -10 2.7 V 0.5 0.15 0.2 -10 V 0.07 0.1 25C Full 0.6 0.7 25C ron NC, NO OFF leakage current COM ON leakage current Switch ON, See Figure 16 V+ nA 10 -20 20 nA Digital Control Inputs (IN1-2, IN3-4) (2) Input logic high VIH Full 1.2 4.3 V Input logic low VIL Full 0 0.6 V Input leakage current (1) (2) 8 IIH, IIL 25C VIN = 3.6 V or 0 Full 2.7 V 0.5 10 50 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.3 V to 2.7 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 2.6 47 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 , CL = 35 pF Turn-off time tOFF VCOM = V+, RL = 50 , CL = 35 pF Break-beforemake time tBBM VNC = VNO = V+, RL = 50 , CL = 35 pF Charge injection QC VGEN = 0, RGEN = 0, NC, NO OFF capacitance CNC(OFF), CNO(OFF) NC, NO ON capacitance COM ON capacitance Digital input capacitance 25C 2.5 V Full 2.3 V to 2.7 V 25C 2.5 V Full 2.3 V to 2.7 V 50 16.5 34 35 ns 25C 2.5 V 4 Full 2.3 V to 2.7 V 3 CL = 1 nF 25C 2.5 V 84 pC VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 2.5 V 52 pF CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 2.5 V 163 pF CCOM(ON) VCOM = V+ or GND, See Figure 19 25C 2.5 V 163 pF 25C 2.5 V 2.5 pF CI VI = V+ or GND 15 ns 35 35 ns Bandwidth BW RL = 50 , Switch ON 25C 2.5 V 35 MHz OFF isolation OISO RL = 50 , f = 100 kHz, Switch OFF 25C 2.5 V -71 dB Crosstalk XTALK RL = 50 , f = 100 kHz, Switch ON 25C 2.5 V -73 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz 25C 2.5 V 0.009 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current I+ 25C Full 2.5 V 0.004 0.1 0.5 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 A 9 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (1) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance ON-state resistance match between channels ON-state resistance flatness VCOM, VNO, VNC 0 VNO or VNC = 1.5 V, ICOM = -100 mA, Switch ON, See Figure 16 ron VNO or VNC = 1.5 V, 0.6 V ICOM = -100 mA, Switch ON, See Figure 16 ron(flat) VNO or VNC = 1.5 V, 0.6 V 1.5 V, 2.5 V, ICOM = -100 mA, Switch ON, See Figure 16 ron Full 0.5 1.65 V INO(OFF), INC(OFF) VNO or VNC = 0.3 V, VCOM = 1.65 V, or VNO or VNC = 1.65 V, VCOM = 0.3 V, NC, NO ON leakage current INO(ON), INC(ON) VNO or VNC = 0.3 V, VCOM = Open, or VNO or VNC = 1.65 V, VCOM = Open, ICOM(ON) VNO or VNC = Open, VCOM = 0.3V, or VNO or VNC = Open, VCOM = 1.65 V, 0.05 1.65 V Full 0.5 1.65 V 25C See Figure 17 1.95 V Full 25C See Figure 18 25C See Figure 18 0.1 nA 10 20 0.1 10 20 -20 -10 1.95 V Full -20 -10 1.95 V Full 0.5 0.7 0.8 -10 V 0.07 0.1 25C Full 0.7 0.8 25C NC, NO OFF leakage current COM ON leakage current 25C V+ nA 10 -20 20 nA Digital Control Inputs (IN1-2, IN3-4) (2) Input logic high VIH Full 1 4.3 V Input logic low VIL Full 0 0.4 V Input leakage current (1) (2) 10 IIH, IIL VIN = 3.6 V or 0 25C Full 1.95 V 0.5 10 50 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 ELECTRICAL CHARACTERISTICS FOR 1.8-V SUPPLY (continued) V+ = 1.65 V to 1.95 V, TA = -40C to 85C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 40 70 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 , CL = 35 pF Turn-off time tOFF VCOM = V+, RL = 50 , CL = 35 pF Break-beforemake time tBBM VNC = VNO = V+, RL = 50 , CL = 35 pF Charge injection QC VGEN = 0, RGEN = 0, NC, NO OFF capacitance CNC(OFF), CNO(OFF) NC, NO ON capacitance COM ON capacitance Digital input capacitance 25C 1.8 V Full 1.65 V to 1.95 V 25C 1.8 V Full 1.65 V to 1.95 V 75 22 45 50 ns 25C 1.8 V 5 Full 1.65 V to 1.95 V 4 CL = 1 nF 25C 1.8 V 64 pC VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 1.8 V 52 pF CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch OFF, See Figure 19 25C 1.8 V 164 pF CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 19 25C 1.8 V 164 pF 25C 1.8 V 2.5 pF CI VI = V+ or GND 25 ns 70 75 ns Bandwidth BW RL = 50 , Switch ON 25C 1.8 V 35 MHz OFF isolation OISO RL = 50 , f = 100 kHz, Switch OFF 25C 1.8 V -71 dB Crosstalk XTALK RL = 50 , f = 100 kHz, Switch ON 25C 1.8 V -73 dB Total harmonic distortion THD RL = 600 , CL = 50 pF, f = 20 Hz to 20 kHz 25C 1.8 V 0.1 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current I+ 25C Full 1.95 V 0.001 0.05 0.15 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 A 11 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com TYPICAL PERFORMANCE 0.70 TA = -40C TA = 25C TA = 85C 2.50 0.60 0.50 0.40 1.50 ron () ron () 2.00 0.30 1.00 0.20 0.50 2.21 2.07 1.79 1.93 1.52 1.66 1.38 1.10 1.24 0.83 0.97 0.69 0.41 0.55 0.14 0.28 0.00 1.58 1.49 1.29 1.39 1.09 1.19 0.99 0.79 0.89 0.59 0.69 0.50 0.30 0.40 0.10 0.20 0.00 0.00 0.00 TA = -40C TA = 25C TA = 85C 0.10 VCOM (V) VCOM (V) Figure 1. ron vs VCOM (V+ = 1.65 V) Figure 2. ron vs VCOM (V+ = 2.3 V) 0.45 0.60 0.40 0.50 0.35 0.30 ron () 0.30 0.25 0.20 0.15 0.20 0.10 TA = -40C TA = 25C TA = 85C 0.10 TA = -40C TA = 25C TA = 85C 0.05 4.13 3.87 3.35 3.61 3.10 2.84 2.58 2.06 2.32 1.81 1.55 1.29 0.77 VCOM (V) VCOM (V) Figure 3. ron vs VCOM (V+ = 3 V) Figure 4. ron vs VCOM (V+ = 4.3 V) 1.80 200 1.65 V 1.60 1.8 V 2.3 V 150 2.5 V 3V 1.40 3.3 V 100 4.3 V 4.3 V 1.20 50 1.00 QC (pC) ron () 1.03 0.00 2.88 2.70 2.52 2.34 2.16 1.98 1.80 1.62 1.44 1.26 1.08 0.90 0.72 0.54 0.36 0.18 0.00 0.26 0.00 0.00 0.52 ron () 0.40 0.80 0 -50 0.60 -100 0.40 -150 0.20 -200 VCOM (V) 1.58 1.49 1.39 1.29 1.19 1.09 0.99 0.89 0.79 0.69 0.59 0.50 0.40 0.30 0.20 0.10 0.00 0.00 -250 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.5 2.7 3.0 3.3 3.6 3.9 4.2 4.3 VCOM (V) Figure 5. ron vs VCOM (All Voltages) 12 Figure 6. Charge Injection (QC) vs VCOM (TA = 25C) Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 TYPICAL PERFORMANCE (continued) 18 50 tON tOFF 45 16 40 14 tON/tOFF (ns) tON/tOFF (ns) 35 30 25 20 12 10 8 15 6 10 4 5 2 0 tON tOFF 0 1.65 1.80 1.95 2.30 2.50 2.70 3.00 3.30 3.60 4.30 -40 25 85 Supply Voltage (V+) Temperature (C) Figure 7. tON and tOFF vs Supply Voltage (TA = 25C) Figure 8. tON and tOFF vs Temperature (V+ = 4.3 V) 0 0 -10 -2 -20 -30 Attenuation (dB) Gain (dB) -4 -6 -8 -40 -50 -60 -70 -10 -80 -12 -14 100.0E+3 -90 -100 1.0E+6 10.0E+6 100.0E+6 100.0E+3 1.0E+9 1.0E+6 Frequency (Hz) 100.0E+6 1.0E+9 Frequency (Hz) Figure 9. Bandwidth Figure 10. OFF Isolation 0 0.160 -10 0.140 -20 0.120 -30 -40 0.100 -50 THD (%) Attenuation (dB) 10.0E+6 -60 -70 -80 0.060 0.040 -90 100.0E+3 0.080 1.0E+6 10.0E+6 100.0E+6 1.0E+9 0.020 Frequency (Hz) 0.000 1 10 100 1000 10000 100000 Frequency (Hz) Figure 11. Crosstalk Figure 12. Total Harmonic Distortion vs Frequency (V+ = 1.8 V) Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 13 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com TYPICAL PERFORMANCE (continued) 0.012 0.0033 0.0032 0.010 THD (%) 0.0032 THD (%) 0.008 0.006 0.0031 0.0031 0.0030 0.0030 0.004 0.0029 0.002 0.0029 1 10 100 1000 10000 100000 Frequency (Hz) 0.000 1 10 100 1000 10000 100000 Frequency (Hz) Figure 13. Total Harmonic Distortion vs Frequency (V+ = 2.5 V) 0.004 Figure 14. Total Harmonic Distortion vs Frequency (V+ = 3.3 V) 0.003 THD (%) 0.003 0.002 0.002 0.001 0.001 0.000 1 10 100 1000 10000 100000 Frequency (Hz) Figure 15. Total Harmonic Distortion vs Frequency (V+ = 4.3 V) 14 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM VNO NO Channel ON r on = VI IN ICOM VCOM -VNO or VNC W I COM VI = V IH or V IL + GND Figure 16. ON-state Resistance (rON) V+ VNC NC COM + VCOM + VNO NO IN VI OFF-State Leakage Current Channel OFF VI = V IH or V IL + GND Figure 17. OFF-State Leakage Current (INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF)) Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 15 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNC NC COM + VCOM VNO NO VI ON-State Leakage Current Channel ON VI = V IH or V IL IN + GND Figure 18. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON)) V+ Capacitance Meter VNC NC VNO NO VBI AS = V + or GND VI = V + or GND VCOM COM VBI AS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 19. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON)) 16 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ VCOM NC or NO VNC or V NO NC or NO CL(2) TEST RL CL VCOM tON 50 35 pF V+ tOFF 50 35 pF V+ COM RL IN VI CL(2) RL GND (1) V+ Logic Input (VI) 50% 50% 0 tON tOFF 90% 90% (VNC or V NO) A. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 20. Turn-On (tON) and Turn-Off Time (tOFF) V+ NC or NO V+ Logic Input (VI) VNC or V NO VCOM 50% 0 COM NC or NO CL(2) VI Logic Input(1) 90% RL 90% (VCOM) IN tBBM VNC or VNO = V+ RL = 50 W CL = 35 pF GND A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. Figure 21. Break-Before-Make Time (tBBM) Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 17 TS3A44159 SCDS225A - MARCH 2007 - REVISED JUNE 2008 ......................................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ Network Analyzer 50 VNC NC Channel ON: NC to COM COM Source Signal VCOM VI = V+ or GND NO Network Analyzer Setup IN VI 50 Source Power = 0 dBm (632-mV P-P at 50- load) + GND DC Bias = 350 mV Figure 22. Bandwidth (BW) V+ Network Analyzer Channel OFF: NC to COM 50 VNC NC VI = V + or GND COM Source Signal 50 VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50- load) VI 50 + GND DC Bias = 350 mV Figure 23. OFF Isolation (OISO) V+ Network Analyzer Channel ON: NC to COM 50 VNC Channel OFF: NO to COM NC VCOM Source Signal VNO NO VI 50 + VI = V+ or GND 50 IN GND Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50- load) DC Bias = 350 mV Figure 24. Crosstalk (XTALK) 18 Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 TS3A44159 www.ti.com ......................................................................................................................................................... SCDS225A - MARCH 2007 - REVISED JUNE 2008 PARAMETER MEASUREMENT INFORMATION (continued) V+ RGEN VGEN OFF ON OFF V IL NC or NO COM + VIH Logic Input (VI) VCOM VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) RGEN = 0 CL = 1 nF QC = C L xVCOM VI = V IH or V IL GND A. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr < 5 ns, tf < 5 ns. B. CL includes probe and jig capacitance. Figure 25. Charge Injection (QC) VI = V IH or V IL Channel ON: COM to NO VSOURCE = V+ P-P Source Signal = 20 Hz to 20 kHz RL = 600 W CL = 50 pF V+/2 V+ Audio Analyzer RL Source Signal 10 mF NO 10 mF COM 600 W 600 W CL(1) VI IN GND 600 W A. CL includes probe and jig capacitance. Figure 26. Total Harmonic Distortion (THD) Submit Documentation Feedback Copyright (c) 2007-2008, Texas Instruments Incorporated Product Folder Link(s): TS3A44159 19 PACKAGE OPTION ADDENDUM www.ti.com 23-Jun-2008 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TS3A44159PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A44159PWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A44159RGTR ACTIVE QFN RGT 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A44159RGTRG4 ACTIVE QFN RGT 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A44159RSVR ACTIVE QFN RSV 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS3A44159RSVRG4 ACTIVE QFN RSV 16 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device TS3A44159PWR Package Package Pins Type Drawing TSSOP PW 16 SPQ Reel Reel Diameter Width (mm) W1 (mm) 2000 330.0 12.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) 7.0 5.6 1.6 8.0 W Pin1 (mm) Quadrant 12.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 11-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS3A44159PWR TSSOP PW 16 2000 346.0 346.0 29.0 Pack Materials-Page 2 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2008, Texas Instruments Incorporated