LED..A80X80W Series Area Lights Area Lights with 3-wire cables for use with PresencePLUS (R)Pro Sensors Features * Lightly diffused area light for PresencePLUS Pro sensors. See Banner's website at www.bannerengineering.com for a complete lighting tutorial. * Continuous or strobed operation is selectable via sensor software. * Solid-state LED light source. * Direct connection to PresencePLUS Pro system or to an external power supply. * Light level remains constant even when input voltage fluctuates 10% from nominal. * Two available bracket options. Models Models* LED Color Wave Length LEDIA80X80W Infrared 850 nm LEDRA80X80W Visible Red 660 nm LEDWA80X80W White All Visible LEDBA80X80W Blue 470 nm LEDGA80X80W Green 525 nm * For 9 m (30') cable, add suffix "W/30" to the model number (e.g., LEDBA80X80W W/30). Specifications Light Source LED; see Models table above for wave lengths Illumination Lightly diffused, high-intensity area light Infrared model: At a 24" distance, illuminates an 8" diameter area within 60% of the center intensity. Visible LED models: At a 12" distance, illuminates a 4" diameter area within 50% of the center intensity. Supply Voltage and Current 24V dc @ 250 mA max. Voltage supplied by PresencePLUS Pro sensors, if operating at 24V dc (see sensor manual). Connections 3 conductor, 2 m (6.5') attached cable Construction Low-carbon steel with black zinc plating, acrylic window Useful Life 10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30% after 10,000 hours and less than 40% after 20,000 hours. Operating Conditions Temperature: 0 to +50 C (+32 to 122 F) Relative humidity: 90% at 50 C (non-condensing) max. Cleaning Instructions Regularly remove any dust, dirt, or fingerprints from the light source. 1. Blow off dust using anti-static compressed air. 2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any other chemicals for cleaning. Printed in USA 05/05 P/N 115607 rev. A LED..A80X80W Series Area Lights Wiring Table LED..A80X80W Wire PresencePLUS Pro Controller Terminal Block External Power Supply (Strobed) External Power Supply (Continuous) Brown Blue Pin 1, +V (24V dc 10%) +V +V Pin 2, -V (dc common) -V -V Black Pin 4 (strobe) +5V dc OFF -V ON -V Figure 1. Area light dimensions Accessory Mounting Brackets * 13-ga. zinc-plated low-carbon steel * (4) M4 Phillips flathead screws included * For mounting light from front SMBABM * 14-ga. zinc-plated low-carbon steel * (4) M4 socket-head cap screws, washers and hex key included * For mounting light from rear SMBACM WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. P/N 115607 rev. A Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 * Phone: 763.544.3164 * www.bannerengineering.com * sensors@bannerengineering.com