RCMT Vishay Sfernice Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors FEATURES * 0.1 W to 2 W at 125 C * EN140100 * CECC 40 101-044 * High climatic performance - 65 C/+ 175 C/56 days * High long term stability drift < 0.25 % after 1000 h The performance of the RCMT resistors exceed the requirements of NF C 83-230 standards. They are particularly relevant to the more stringent military and industrial applications especially when high ambient temperatures such as + 175 C are to be encountered. The RCMT resistors are qualified and released to the NF C UTE 83-230 standard styles RS56C, RS60E and C, RS65E and C, RS70E and C. * Tight temperature coefficient to 15 ppm/C * Temperature coefficient tracking 5 ppm/C * Wide ohmic range from 1 to 5 M * Tight tolerances up to 0.1 % * Matching tolerance to 0.05 % * Termination: Pure matte tin * Compliant to RoHS directive 2002/95/EC DIMENSIONS in millimeters 25 min. A 25 min. OB OC SERIES A max. O B max. OC WEIGHT g RCMT01 4.32 2.03 0.4 0.11 RCMT02 6.7 2.5 0.6 0.28 RCMT05 10.4 3.66 0.6 0.46 RCMT08 16.5 6.4 0.8 1.3 RCMT1 19.3 6.4 0.8 1.5 RCMT2 29 10.2 0.8 4.4 RCMT4 54 10.2 0.8 13 TEMPERATURE COEFFICIENT TCR CODE TEMPERATURE RANGE NOMINAL TEMPERATURE COEFFICIENT TEMPERATURE RANGE TYPICAL TEMPERATURE COEFFICIENT K5 0 C to + 155 C 15 ppm/C 0 C to + 70 C 10 ppm/C K4 - 55 C to + 175 C 25 ppm/C - 10 C to + 70 C 15 ppm/C K3 - 55 C to + 175 C 50 ppm/C - 10 C to + 70 C 30 ppm/C ENVIRONMENTAL SPECIFICATIONS 107 Insulation Resistance > M Voltage Coefficient 10 ppm/V PRACTICAL OPERATING TOLERANCES After the 10 000 h load life test, at nominal power rating, 90'/30' cycles, + 125 C ambient temperature, the total actual drifts measured at + 125 C are the following: Environmental Specifications - 65 C/+ 175 C/56 days Document Number: 52011 Revision: 02-Oct-09 Manufacturing tolerance 0.1 % 1% Drift due to TCR (K4) + life drift 0.25 % 0.35 % Max. total deviation from nominal ohmic value, including the manufacturing tolerance 0.35 % 1.35 % For technical questions, contact: sfer@vishay.com www.vishay.com 177 RCMT Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors Vishay Sfernice TECHNICAL SPECIFICATIONS VISHAY SFERNICE SERIES RESISTANCE VALUE RANGE IN RELATION TO - TEMPERATURE COEFFICIENT - TOLERANCE NF C POWER POWER 83-230 RATING RATING CECC 40 AT + 70 C AT + 125 C 101-044 RCMT01 K3 - RCMT01 K4 - RCMT02 K3 RS 56C RCMT02 K4 RS 56E RCMT05 K3 RS 60C RCMT05 K4 RS 60E RCMT08 K3 RS 65C RCMT08 K4 RS 65E RCMT1 K3 RS 70C RCMT1 K4 RS 70E RCMT2 K3 - RCMT2 K4 - RCMT4 K3 - RCMT4 K4 - K3 K4 MAXIMUM CRITICAL VOLTAGE RESISTANCE K5 0.2 % 0.5 % 1% 0.1 % 0.2 % 0.5 % 1% 0.1 % 0.2 % 0.5 % 1% 0.063 W 0.05 W 10 511 k 1 511 k 49.9 100 k 49.9 511 k 100 100 k 100 100 k 200 V - 0.125 W 0.1 W 10 332 k 1 332 k 10 332 k 1 332 k 10 100 k 10 332 k 300 V - 0.25 W 0.125 W 10 332 k 1 1 M 10 332 k 1 1 M 10 332 k 10 1 M 350 V 980 k 0.5 W 0.25 W 10 1 M 1 1.5 M 10 1 M 1 1.5 M 10 750 k 10 1.5 M 400 V 640 k 1W 0.5 W 10 1 M 1 2 M 10 1 M 1 2 M 10 750 k 10 2 M 500 V 500 k 2W 1W 10 1 M 1 2.5 M 10 1 M 1 2.5 M 10 1 M 10 2.5 M 600 V 360 k 4W 2W 10 2.5 M 1 5 M 10 2.5 M 1 5 M 10 2 M 10 2.5 M 800 V 320 k Note * Undergoes European Quality Insurance System (CECC) POWER RATING TEMPERATURE RISE 0 0 25 50 70 100 125 150 175 4 MT RC 30 T2 M RC RC M T1 20 02 50 40 10 MT RATED POWER IN % 100 RC HOT SPOT TEMPERATURE IN C 50 0 0 AMBIENT TEMPERATURE IN C www.vishay.com 178 For technical questions, contact: sfer@vishay.com 0.5 1.0 1.5 2.0 RATED POWER IN W Document Number: 52011 Revision: 02-Oct-09 RCMT Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors Vishay Sfernice PERFORMANCE EN140100 - CECC 40 101-044 TESTS TYPICAL VALUES AND DRIFTS CONDITIONS REQUIREMENTS 2 Un/1 min 0.25 % < 0.05 % or 0.05 2.5 Um/5 s limited to 2 Un 0.25 % 0.05 % or 0.05 1000 h at + 155 C 0 % of Pr 0.5 % 0.25 % or 0.05 56 days with low load 0.5 % 0.2 % or 0.05 Insulation resistance > 106 M 0.1 % 0.05 % or 0.05 0.5 % Insulation resistance > 103 M 0.2 % or 0.05 Insulation resistance > 106 M Pull - twist - 2 bends 0.1 % 0.05 % or 0.05 Vibration Severity 55 B 0.1 % 0.05 % or 0.05 Soldering (Thermal Shock) + 260 C 10 s 0.1 % 0.05 % or 0.05 0.5 % 0.15 % or 0.05 - 0.25 % or 0.05 - < 0.05 % Dielectric Voltage Short Time Overload Load Life at Maximum Category Temperature Damp Heat Humidity (Steady State) Rapid Temperature Change Climatic Sequence Terminal Strength Load Life Shelf Life - 55 C + 175 C - 65 C + 175 C severity 1 Cycle 90'/30' 70 C ambient 1000 h at Pn 10 000 h at Pn 1 year ambient temperature NOISE LEVEL In a frequency decade, the average noise level is 0.1 V/V for models RCMT08, RCMT1, RCMT2 and RCMT4 in all ohmic values. It progressively increases as a function of the ohmic value and can reach 0.2 V/V for the highest values of models RCMT02 and RCMT05 (0.1 V/V for R < 10 k). SPECIAL APPLICATIONS Temperature coefficient tracking to 5 ppm. Tolerance matching to 0.05 %. Selection of positive or negative TCR in temperature range of - 20 C to + 125 C. For these applications and other requirements consult Vishay Sfernice. RECOMMENDATION The lower the ohmic value, the more important the influence of lead resistance is on measurements. The nominal resistance value is therefore measured at a distance of 5 mm from resistor body. Document Number: 52011 Revision: 02-Oct-09 For technical questions, contact: sfer@vishay.com www.vishay.com 179 RCMT Molded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors Vishay Sfernice MARKING Printed: series, style, NF style if applicable, ohmic value (in ), tolerance (in %), temperature coefficient, manufacturing date. Due to lack of space, RCMT02 is referenced as MT02. GLOBAL PART NUMBER INFORMATION R GLOBAL MODEL RCMT www.vishay.com 180 C M T 0 2 1 3 0 0 1 SIZE SPECIAL OHMIC VALUE TOLERANCE 01 02 05 08 10 20 40 As applicable. Contact us. The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 13001 = 13 k 33001 = 33 k 220R0 = 220 1R220 = 1.22 B = 0.1 % A = 0.2 % D = 0.5 % F=1% For technical questions, contact: sfer@vishay.com F H S TEMPERATURE COEFFICIENT H = K3, 50 ppm/K E = K4, 25 ppm/K D = K5, 15 ppm/K 1 4 PACKAGING AM500 = A20 BAG100 = S14 BAG50 = S09 BAG10 = S03 BO50* = B25 *: possible in N/A Document Number: 52011 Revision: 02-Oct-09 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1