WRAP-3W Series WIDE INPUT ISOLATED & REGULATED 3W OUTPUT DUAL OUTPUT MINIATURE DIP PACKAGE FEATURES PRODUCT PROGRAM Wide (2:1) Input Range Efficiency to 82% Operating Temperature: -40C~+85C 1KVDC Isolation Dual Output UL94-V0 Package No Heat sink Required Industry Standard Pin out MTBF>1,000,000 hours Custom Service Available Part Number Input Output Voltage (VDC) Voltage Current (mA) Nominal Range Max* (VDC) Max Min WRA0505P-3W 5 4.5~9VDC 11 WRA0509P-3W 5 4.5~9VDC WRA0512P-3W 5 4.5~9VDC WRA0515P-3W 5 WRA1205P-3W 12 WRA1209P-3W 12 WRA1212P-3W 12 WRA1215P-3W 12 Efficiency (%, Typ) Package Style 5 300 30 65 DIP 11 9 165 16 67 DIP 11 12 125 12 70 DIP 4.5~9VDC 11 15 100 10 72 DIP 9~18VDC 22 5 300 30 72 DIP 9~18VDC 22 9 165 16 73 DIP 9~18VDC 22 12 125 12 77 DIP 9~18VDC 22 15 100 10 79 DIP WRA1505P-3W 15 12~24VDC 30 5 300 30 75 DIP APPLICATIONS WRA1509P-3W 15 12~24VDC 30 9 165 16 79 DIP The WRAP-3W Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (voltage range: 2:1); 2) Where isolation is necessary between input and output (isolation voltage =1000VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanding. These products don't apply to: 1) Where the input voltage t is required to be more than 2:1; 2) Where the isolation voltage between input and output is required to be >1000VDC; 3) The output load's actual power consumption is less than 1W, otherwise our company's WRAP-1W/0.5W series are recommended. WRA1512P-3W 15 12~24VDC 30 12 125 12 80 DIP WRA1515P-3W 15 12~24VDC 30 15 100 10 81 DIP WRA2405P-3W 24 18~36VDC 40 5 300 30 78 DIP WRA2409P-3W 24 18~36VDC 40 9 165 16 80 DIP WRA2412P-3W 24 18~36VDC 40 12 125 12 81 DIP WRA2415P-3W 24 18~36VDC 40 15 100 10 82 DIP WRA4805P-3W 48 36~72VDC 80 5 300 30 76 DIP WRA4809P-3W 48 36~72VDC 80 9 165 16 81 DIP WRA4812P-3W 48 36~72VDC 80 12 125 12 81 DIP WRA4815P-3W 48 36~72VDC 80 15 100 10 82 DIP MODEL SELECTION WRA0505P-3W Rated Power Package Style Output Voltage Input Voltage Product Series ISOLATION SPECIFICATIONS Item Isolation voltage Isolation resistance Test conditions Flash tested for 60 seconds Test at 500VDC Min 1000 1000 Typ Max Units VDC M Max 3 3 5 0.2 0.5 0.03 60 150 200 600 Units W OUTPUT SPECIFICATIONS Item 3W output power Positive Voltage accuracy Negative Voltage accuracy Load regulation Line regulation Temperature drift (Vout) Ripple Noise Switching frequency Test conditions See below products program Refer to recommended circuit Refer to recommended circuit From 10% to 100% load Input Voltage From Low to High Refer to recommended circuit 20Hz-300KHz bandwidth DC-20MHz bandwidth 100% loadnominal input voltage 10% loadnominal input voltage Min 0.3 Typ 1 3 0.1 0.2 30 80 80 250 % %/C mVp-p KHz MORNSUN Science& Technology Ltd. Address: 8th floor 8th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-85571041 Fax: 86-20-85536272 Http://www.mornsun.cn/ Note: 1.All specifications measured at TA=25C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2.See below recommended circuits for more details. Edition: Preliminary / Page 1 of 1 COMMON SPECIFICATION +Vo Vin Output Short Circuit Protection Continuous Temperature Rise at Full Load 30C (TYP) Cooling Free Air Convection GN D C DC DC C C L L Vn i No-load Power Consumption 100mW (typical) Operating Temperature Range -40C~+85C Storage Temperature Range -55C ~+125C Lead Temperature*** Storage Humidity Range 300C (1.5mm from case for 10 seconds) 95% Case Material Plastic (UL94-V0) MTBF >1,000,000 hours GN D DC DC C 0V -Vo +Vo C C C L C 0V -Vo Figure 1) ***Lead Temperature 1.5mm from case for 10 seconds. TYPICAL CHARECTERISTICS supply and the rippled voltage do not exceed the module standard. Input current of power supply should afford the startup current of this kind of DC/DC module. (See figure 2) External Capacitor Although this series of DC/DC converter can work without external capacitor, in order to keep an optimum performance, however, it needs external capacitor. (See Table 1) FOOTPRINT DETAILS Requirement on Output Load Bottom View 2 3 9 1011 2322 16 1514 Pin WRAP Series 2,3 GND 10,15 NC 14 +Vo 11 -Vo 9,16 0V 22,23 Vin should never be operated under no load!!! If the actual load is less below the OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT 31.80 2 3 9.45 15.24 20.30 23 22 2 x 2.54 22.86 (Bottom View) External Capacitor Table(Table 1) Vin 1615 14 2.54 specified minimum loadthe output ripple of this type of DC/DC converter will increase drastically and at the same time efficiency & reliability of the circuit will decrease deeply .If the actual output power from the load in your circuit is very smallplease connect a resistor with proper resistance at the output end to in parallel to increase the load, or use our company's other products with a lower rated output power. The products cannot be used in parallel and in plug and play. 0.50 9 10 11 To ensure this module operate efficiently and reliably, a minimum load is specified for this kind of DC/DC converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum out put load is not less than 10% Of the full load, and that this product 4.00 (Side View) 5V & 12V 24V & 48V Cin 100uF 10uF Cout (0+70C) Cout (-40+85C) 100uF (electrolytic capacitor) 47uF (tantalum capacitor) Note: All Pins on a 2.54mm pitch; All Pin diameters are 0.50 mm(Tolerance:0.25); All dimensions in mm. The dimensions of the WRAP series are correspondent with the WRBP series. APPLICATION NOTE Recommended Circuit All the WRA-3W Series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load. Never be tested under no load (See Figure 1 & 2). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance should not be too high.(See table 1).If you want to use the products in high EMI, please choose our metal packaged products. Input Current When it is used in unregulated power supplybe sure that the fluctuating range of the power MORNSUN Science& Technology Ltd. Address: 8th Floor 8th Building, Huangzhou Industrial District, Guangzhou, China Tel :86-20-85571041 Fax:86-20-85536272 Http:// www.mornsun.cn/ Edition: Preliminary / Page 2 of 2