TL50 Tower Light Multi-Color General-Purpose or Audible Indicators Features * Rugged, cost-effective and easy-to-install multisegment indicators * Illuminated segments provide easy-to-see operator guidance and indication of equipment status * Displays up to 5 colors * Optional audible function with variable intensity * Compact devices are completely self-contained -- no controller needed * Immune to EMI and RFI interference * 18 to 30V dc or 24V ac operation * No assembly required Multi-Color General-Purpose Models Model Color Count Connection* LED Function** TL50RQ 1 TL50GRQ 2 TL50GYRQ 3 TL50BGYRQ 4 5-pin Euro integral QD connector 4 Color: Blue, Green, Yellow, Red TL50WBGYRQ 5 8-pin Euro integral QD connector 5 Color: White, Blue, Green, Yellow, Red Inputs 1 Color: Red 4-pin Euro integral QD connector 2 Color: Green, Red 3 Color: Green, Yellow, Red Bimodal (NPN or PNP) Multi-Color Audible Models Model Color Count TL50RAQ 1 TL50GRAQ 2 TL50GYRAQ 3 P/N 142406 rev. D Connection* LED Function** 4-pin Euro integral QD connector 1 Color: Red 5-pin Euro integral QD connector 2 Color: Green, Red Inputs Bimodal (NPN or PNP) 3 Color: Green, Yellow, Red 9/2009 0 142406 5 142406 Model Color Count Connection* LED Function** TL50BGYRAQ 4 8-pin Euro integral QD connector 4 Color: Blue, Green, Yellow, Red Inputs * Integral QD models are listed. * For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, TL50GYRQP). * For 2 m (6.5') cable, omit suffix Q from model number (example, TL50GYR). * A model with a QD requires a mating cable (see Quick-Disconnect (QD) Cordsets) ** The first color listed is the bottom color, going up in successive order. Contact factory for other colors and color combinations. Specifications Feature Description Supply Voltage and Current 18 to 30V dc (10% max. ripple); or 21 to 27V ac * Indicators: @ 45 mA max. current per LED color * Audible Alarm: 25 mA max. current Indicators LEDs are independently selected: Green, Red, Yellow, Blue or White; 1-5 colors depending on model Input Response Time Indicator ON/OFF: 10 ms (max.) Audible Alarm Ocillation Frequency: 2.7 kHz 500 Hz Max. Intensity (typical): 95 db @ 1 meter Audible Adjustments Construction The audible intensity can be adjusted by unscrewing the cover. The cover should not be unscrewed more than one and a half turns or it may detach during operation. For max. intensity, remove the center plug by rotating it 180 counterclockwise. Bases and Covers: ABS Light Segment: Polycarbonate Environmental Rating General-Purpose: IEC IP67 Audible: IEC IP50 Connections Operating Conditions Integral 4-pin, 5-pin or 8-pin Euro-style QD, 150 mm PVC pigtail with QD, or 2 m (6.5') integral cable, depending on model General-Purpose: -40 to +50 C (-40 to +122 F) Audible: -20 to +50 C (-4 to +122 F) Certifications 2 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 P/N 142406 rev. D 142406 Dimensions 50.0 [1.97"] H M30x1 (mounting nut included) 19.0 [0.75"] Internal Threads 1/2-14 NPSM Max Torque 2.25 Nm [20in-lbf] 8.3 [0.33"] Tower Height (H) Color Count Multi-Color General-Purpose Models Multi-Color Audible Models 1 61.2 mm (2.4") 92.0 mm (3.6") 2 101.9 mm (4.0") 132.7 mm (5.2") 3 142.6 mm (5.6") 173.4 mm (6.8") 4 183.3 mm (7.2") 214.1 mm (8.4") 5 224.0 mm (8.8") -- Tower Height (H) with top unscrewed approximately 3.5 mm to allow sound to escape Hookups - 4-Pin Models Sourcing (PNP) Input Indicator Color C1 C2/A C3/A Sinking (NPN) Input Wiring Key 3 4 18-30V dc 21-27V ac Indicator Color C1 1 2 C2/A C3/A 3 4 18-30V dc 21-27V ac 1 = Brown 2 = White 1 2 3 = Blue 4 = Black Pins 1 and 2 could activate the corresponding color or the audible function, depending on model. P/N 142406 rev. D Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 3 142406 Hookups - 5-Pin Models Sourcing (PNP) Input Indicator Color Sinking (NPN) Input 3 Indicator Color 18-30V dc 21-27V ac 4 3 18-30V dc 21-27V ac 4 C1 Wiring Key 1 = Brown C1 2 = White 1 1 3 = Blue C2 C2 2 2 4 = Black 5 5 = Gray C3 C3 5 C4/A C4/A Pin 5 could activate the corresponding color or the audible function, depending on model. Hookups - 8-Pin Models Sourcing (PNP) Input Indicator Color Sinking (NPN) Input 7 6 Indicator Color 18-30V dc 21-27V ac 18-30V dc 21-27V ac 6 C1 C1 2 2 1 1 5 C4 4 C5/A C5/A 2 = Brown 4 = Yellow C3 C3 1 = White 3 = Green C2 C2 C4 7 Wiring Key 5 5 = Gray 4 6 = Pink 8 8 3 3 7 = Blue 8 = Red Pin 4 could activate the corresponding color or the audible function, depending on model. Pins 3 and 8 are not used. Quick-Disconnect (QD) Cordsets Style Model Length Dimensions Pinout Female MQDC-406 4-pin Euro-style MQDC-415 straight MQDC-430 4 2 m (6.5') o 15 mm (0.6") 5 m (15') 9 m (30') 1 4 44 mm max. (1.7") 2 3 M12 x 1 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 P/N 142406 rev. D 142406 Style Model Length Dimensions Pinout 38 mm max. (1.5") MQDC-406RA 4-pin Euro-style MQDC-415RA Right-angle MQDC-430RA 1 = Brown 2 m (6.5') 9 m (30') 2 = White 38 mm max. (1.5") 5 m (15') 3 = Blue M12 x 1 4 = Black o 15 mm (0.6") Quick-Disconnect (QD) Cordsets Style Model Length Dimensions Pinout Female 5-pin Euro-style Straight MQDC1-506 2 m (6.5') MQDC1-515 5 m (15') MQDC1-530 2 1 o 15 mm (0.6") 9 m (30') 3 4 M12 x 1 44 mm max. (1.7") 1 = Brown 38 mm max. (1.5") MQDC1-506RA 5-pin Euro-style Right-Angle 2 = White 2 m (6.5') MQDC1-515RA 5 m (15') MQDC1-530RA 9 m (30') 5 38 mm max. (1.5") 3 = Blue 4 = Black M12 x 1 o 15 mm (0.6") 5 = Gray Quick-Disconnect (QD) Cordsets Style Model Length Dimensions Pinout Female 2 3 4 5 1 7 6 8 8-pin Euro-Style straight MQDC2S-806 2 m (6.5') MQDC2S-815 5 m (15') MQDC2S-830 9 m (30') o 15 mm (0.6") 44 mm max. (1.7") M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red P/N 142406 rev. D Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 5 142406 Mounting Brackets Model Features SMB30A * Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (1/4") hardware * 30 mm mounting hole * 12-ga. stainless steel Dimensions (all measurements in mm) Hole center spacing: A to B=40.0 Hole size: A=o 6.3, B=27.3 x 6.3, C=o 30.5 SMB30FA * Swivel bracket with tilt and pan movement for precision adjustment * 30 mm mounting hole * 12-ga. 304 stainless steel A=3/8 - 16 x 50.8 Hole size: B=o 30.1 SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versatility and orientation * Clearance for M6 (1/4") hardware * 30 mm mounting hole Hole center spacing: A=51.0, A to B=25.4 Hole size: A=42.6 x 7.0, B=o 6.4, C=o 30.1 SMB30SC 6 * Swivel bracket with 30 mm mounting hole * Black reinforced thermoplastic polyester * Stainless steel mounting and swivel locking hardware included Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 P/N 142406 rev. D 142406 Model Features Dimensions (all measurements in mm) Hole center spacing: A to B=50.8 Hole size: A=o 7.0 SMBAMS30P * Flat SMBAMS series bracket * 30 mm mounting hole * Articulation slots for 90+ rotation * 12-ga. 300 series stainless steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm mounting hole * Articulation slots for 90+ rotation * 12-ga. cold rolled stainless steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=o 6.5, C=o 31.0 P/N 142406 rev. D Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com Tel: 763.544.3164 7 142406 Mounting Systems - Elevated Mount Model Features * Streamlined acetal stand-off pipe adapter/cover * Connects between TL50 Tower Light and 1/2" NPSM/DN15 pipe * Mounting hardware included SA-M30TE12 Stainless Steel Mounting System Aluminum SOP-E12-300SS * Elevated-use stand-off pipe (1/2" NPSM/DN15) SOP-E12-150A * Polished 304 stainless steel or Length: 150 mm anodized aluminum surface (6") * 1/2 NPT thread at both ends * Compatible with most industrial environments SOP-E12-300A Length: 300 mm (12") Length: 300 mm (12") SOP-E12-150SS Length: 150 mm (6") SA-E12M30 * Streamlined acetal mounting base adapter/cover * Connects between 1/2" NPSM/DN15 pipe and 30 mm (1-3/16") drilled hole * Mounting hardware included WARNING . . . Not To Be Used for Personnel Protection Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your Banner Safety Products catalog for safety products that meet OSHA, ANSI and IEC standards for personnel protection. Warranty: Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.