For low drain / long tetm operating
applications requesting superior
voltage response in -55 ~+85
environments.
Cell size references
Alternative models
Electrical characteristics
(typical values relative to cells stored for one year or less at +30 max.)
Nominal capacity 0.45Ah
(at 0.5 mA +20 2.0V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off).
Open circuit voltage (at +20 ) 3.66V
Nominal voltage (at 0.5mA +20 ) 3.6V
Pulse capability: Typically up to 20 mA (30 mA/0.1 second pulses,
drained every 2 mn at +20 from undischarged cells with 10 A base
current, yield voltage readings above 3.0V. The readings may vary according
to the pulse characteristics, the temperature, and the cell s previous history.
Fitting the cell with a capacitor may be recommended in severe conditions.
Consult ABLE)
Max. Continuous current 10mA
Max. Pulse current 20mA
Storage (recommended) +30 +86 F max
(for more severe conditions, consult ABLE)
Operating temperature range -55 / +85
(Operation above ambient T may lead to reduced capacity and -76 F / +185 F
lower voltage readings at the beginning of pulses. Consult ABLE)
Physical characteristics
Diameter (max) 13mm(0.45 in)
Height (max) 15mm(0.6 in)
Typical weight 5.5g(0.18oz)
Available termination suffix radial tabs, radial pins, axial leads, flying leads
R
Primary lithium batteries
ER13150 3.6V 450mAh
3.6V Primary lithium-thionyl chloride
(Li-SOCl2) Energy type
bobbin cell
Primary Lithium Battery Expert
Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:able@able-battery.com website:www.able-battery.com
ER13150 3.6V 450mAh
Hours
Voltage V
Voltage V
Voltage VS Temperature
Capacity VS Current
Capacity Ah
Temperature
Current mA
(+)
5 0.1
13.0Max
1 0.05
R
Discharge performance 25
Characteristic curves
15.0Max
OC
10mA 0
4mA
0.35Ah .5mA 100 A
0.28Ah 0.45Ah
0.39 Ah
3.5
3.0
2.5
2.0
1.5
1.0
0.111010101010
2345
4.0
3.5
3.0
2.5
2.0
***S*
012345678910
0.010.1110100
3.8
3.6
3.4
3.2
3.0
2.8
-60-40-20020406080
10 A
0
.1mA
0
.5mA
2mA
0.5
0.4
0.3
0.2
0.0
0.1
20 C
O
72 C
O
55 C
O
-30 C
O
0 C
O
Key features
High and stable operating voltage
Superior drain capability
Low self-discharge rate
(less than 1% after 1year of storage
at +20 )
Optional stainless steel container for
low magnetic and nickle plated steel
container for more safe design
Hermetic glass-to-metal sealing
Notch technology for safety vent is
recommended
Non-flammable electrolyte
Main applications
Radiocommunication and other
military applications
Alarms and security systems
Beacons and emergency location
transmitters
GPS
Metering systems
Sonobuoys
LED lighting applications
Others
Storage
The storage area should be clean,
cool (not exceeding +30 ), dry
and ventilated.
Warning
Do not use if the battery casing was
mangled.
Please discharge the battery few
minutes with 100mA,if the battery
voltage is lower than your need or consult ABLE.
Don t use different models of battery
in series.
Soldering the tag should be finished
in few seconds.
Do not try to recharge.
Primary Lithium Battery Expert
Tel:0086 755 29807561/63 Fax:0086 755 29807510 Email:able@able-battery.com website:www.able-battery.com
