HQDP, EQDP SERIES
(0.50 mm) .0197"(HQDP) (0.80 mm) .0315"(EQDP)
HQDP–020–06.00–SEU–TTR–6–F
Optional Captive Screw or
Screw Mount Option
Socket or
Terminal
30 AWG
twinax
ribbon cable
Differential Pair
routing
Surface
Mount or
Edge Mount
EQDP–028–06.00–STR–TTL–7–F
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
Wire Length ± (1.27) .050
OAL = Wire Length + (20.32) .800 ± (3.81) .150
NO. OF
PAIRS
END
NO. 1
WIRE
LENGTH
END
NO. 2
Specify
END
ASSEMBLIES
from chart
WIRING
OPTION
–5
= Pin 1 to
Pin 1
–6
= Pin 1 to
Pin 2
–7
= Pin 1 to
Second
Last Pin
–8
= Pin 1 to
Last Pin
SCREW
OPTION
Leave
blank for
no Screw
Option
–F
= End
No. 1
–S
= End
No. 2
–B
= Both
Ends
–“XX.XX”
= Wire Length
in Inches
(43.7 mm) 01.72"
minimum
TYPE
HQDP
= (0.50 mm)
.0197" pitch
EQDP
= (0.80 mm)
.0315" pitch
–020,
–040, –060
(20 pairs per bank)
HQDP Series
–014, –028,
–042, –056
(14 pairs per bank)
EQDP Series
END NO. 1
(–TEU SHOWN)
END NO. 2
(–TTR SHOWN)
Notes:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
Design your High-Speed Cable
with Samtec’s High-Speed
Cable Solutionator® at
www.samtec.com/hdr
This Series is non-standard,
non-returnable.
Q PAIRS® TWINAX CABLE ASSEMBLIES
END SURFACE MOUNT
TTR Terminal, Top,
Notch Right
TTL Terminal, Top,
Notch Left
TBR Terminal, Bottom,
Notch Right
TBL Terminal, Bottom,
Notch Left
STR Socket, Top,
Notch Right
STL Socket, Top,
Notch Left
SBR Socket, Bottom,
Notch Right
SBL Socket, Bottom,
Notch Left
For complete specifications see
www.samtec.com?EQDP or
www.samtec.com?HQDP
Cable:
30 AWG twinax ribbon
Signal Routing:
100 W Differential
Cable Bending Radius:
(3.18 mm) 1/8" min
Plating:
Au over 50 µ" (1.27 µm) Ni
Current Rating:
EQDP = 500 mA per pin
HQDP = 400 mA per pin
(6 adjacent pins powered)
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-25 °C to +105 °C
Skew (pair-to-pair):
<10 ps/ft
Skew (within a pair):
<5 ps/ft
EMI Performance:
FCC Class A
RoHS Compliant:
Yes
For complete scope of
recognitions see
www.samtec.com/quality
RECOGNITIONS
SPECIFICATIONS
FILE NO. E111594
ALSO AVAILABLE
(MOV Required)
Pairs
Terminations
®
WIRING REQUIREMENTS
WIRING
OPTION END OPTIONS
5 or 6
TTR, TBL, STL,
SBR, TEU, SED to TTR,
TBL, STL, SBR, TED, SEU
or
TTL, TBR, STR,
SBL, TED, SEU to TTL,
TBR, STR, SBL, TEU, SED
7 or 8
TTR, TBL, STL,
SBR, TEU, SED to TTL,
TBR, STR, SBL, TEU, SED
or
TTL, TBR, STR,
SBL, TED, SEU to TTR,
TBL, STL, SBR, TED, SEU
END EDGE MOUNT
TEU Terminal, Edge,
Notch Up
TED Terminal, Edge,
Notch Down
SEU Socket, Edge,
Notch Up
SED Socket, Edge,
Notch Down
Gbps
14
HIGH-SPEED CHANNEL PERFORMANCE
HQDP or EQDP
Rating based on Samtec reference channel.
For full SI performance data visit Samtec.com
or contact SIG@samtec.com
F-219 (Rev 20AUG20)
EQDP Mates with:
QTE-DP, QSE-DP
HQDP Mates with:
QTH-DP, QSH-DP