Ordering Information
EXAMPLE: 61CP 02 20100 G F NA0
Series 61CP––––––
Pressure Connection 1/8” NPTF-2A Male ––––
Electrical Connection Packard Metri-Pack™ ––––––––––––
Pressure Range 0-100 psi ––––––––––––––––––––––––––––––––
Pressure Reference gage ––––––––––––––––––––––––––––––––––––––––––––––
Seal Material Fluorosilicone––––––––––––––––––––––––––––––––––––––––––––––––––
Connector Harness none required ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
STANDARD OPTIONS SPECIAL OPTIONS
Series 61CP
Pressure Connection (11/16” Hex – under body)
02 1/8” NPTF-2A Male 03 1/4” NPTF-2A Male Consult the factory for other pressure connections
Electrical Connection 2 Packard Metri-Pack™4Packard Metri-Pack™ (UL)
Pressure Ranges 0015 (psia, psig) 0030 (psia, psig) 0050 (psia, psig)
0100 (psia, psig) 0150 (psis, psig) 0250 (psis, psig) Consult the factory for other pressure ranges
0250 (psis, psig) 0500 (psis, psig)
psia = absolute psig = vented gage psis = sealed gage
Pressure Reference A Absolute GGage SSealed Gage
Seal Material E Ethylene propylene HHNBR VViton™BNitrile (BUNA-N, NBR)
FFluorosilicone NNeoprene
(use seal compatibility guide for temperature ranges)
Connector Harness (Mating Connector) (Wire Lead) (Wire Length) (Mating Connector) (Wire Lead) (Wire Length)
NNone required ANo wire 0No length YRequired ANo wire 0No length
BStandard wire(1) 11 meter
FUL 1015, 105°C 22 meter
rated wire(2)
(1)Black, Red, Green (2)Black, Red, Blue
Seal Compatibility Guide
Type Seal Material Media Compatibility Maximum Seal
(Contact TI for more information) Temperature Range
B Nitrile (BUNA-N, NBR) petroleum oils, lubricants, detergent solutions, helium -20°C to +100°C
H HNBR (Hydrogenated Nitrile) petroleum oils, lubricants, detergent solutions -20°C to +135°C
E Ethylene Propylene steam, soaps, polar solvents, brake fluid, acetone, Skydrol™-40°C to +135°C
F Fluorosilicone chlorinated solvents, oils, fuels, air -40°C to +135°C
N Neoprene refrigerants (freons, ammonia) -40°C to +120°C
V Fluorocarbon (Viton™) fertilizers, freons, butanes, oils, trichloroethylene -35°C to +135°C
Patents: Texas Instruments products are covered by one or more of the
following U.S. patents, in addition to U.S. pending and International pending
and issued patents: 4,716,492; 4,774,626; 4,875,135; 4,888,662; 4,951,236;
4,982,351; 5,043,841; 5,051,937.
©2000 Texas Instruments Incorporated
Printed in U.S.A. Reprinted July, 2001 1K Rev.B
61CP
Packard Metri-Pack is a trademark of Delphi Packard Electric Systems; Viton
is a trademark of E.I. duPont de Nemours Company; Skydrol is a trademark of
Monsanto Company.
Important Notice: Texas Instruments (TI) reserves the right to make
changes to or discontinue any product or service identified in this publi-
cation without notice. TI advises its customers to obtain the latest
version of the relevant information to verify, before placing any orders,
that the information being relied upon is current. TI assumes no respon-
sibility for infringement of patents or rights of others based on TI appli-
cations assistance or product specifications since TI does not possess full
access concerning the use or application of customers’ products. TI also
assumes no responsibility for customers’ product designs.
61CP Series
Ceramic Capacitive Pressure Transducer
Dimensions
Texas Instruments Incorporated
34 Forest St., MS 23-10
Attleboro, MA 02703-0964
Phone: 1-888-438-2214
Fax: (508) 236-2349
email: tisensors@ti.com
www.tisensors.com
2.20” MAX.
(55.9mm)
GROUND
SUPPLY
VOLTAGE
ø0.95”
(ø24.0mm)
OUTPUT
1.79” MAX
(45.5mm)
ø0.67”
(ø17.0mm)
11/16” ACROSS FLATS
(17.5mm)
1/4-18 NPTF-2A
GROUND
SUPPLY
VOLTAGE
ø0.95”
(ø24.0mm)
OUTPUT
1/8-27 NPTF-2A
ø0.67”
(ø17.0mm)
11/16” ACROSS FLATS
(17.5mm)
2.60” MAX.
(66.0mm)
1.40” MAX
(35.6mm) 1.40” MAX
(35.6mm)
1.79” MAX
(45.5mm)