ALUMINUMELECTROLYTICCAPACITORS UKA For High Grade Audio Equipment, Wide Temperature Range. 105C high quality capacitors for audio equipment. Selected materials to create superior acoustic sound. Compliant to the RoHS directive (2011/65/EU). AEC-Q200 compliant. Please contact us for details. UKA High Grade UKT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Performance Characteristics - 55 to +105C 6.3 to 50V 22 to 22000 F 20% at 120Hz, 20C After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Rated voltage (V) Tangent of loss angle (tan ) tan (MAX.) 6.3 0.30 10 0.26 16 0.22 25 0.18 35 0.16 Measurement frequency : 120Hz at 20 C 50 0.14 For capacitors with more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) Stability at Low Temperature tan 6.3 5 10 Z-25C / Z+20C Z-40C / Z+20C (MAX.) 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on pearl blue sleeve. Capacitance Change tan Leakage current Radial Lead Type Type numbering system (Example : 16V 1000F) d Sleeve (P.E.T.) Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value 1 2 3 4 5 6 7 8 9 10 11 D+ Rated capacitance (1000F) L+ Pressure relief vent (6.3up) Configuration Capacitance tolerance (20%) P 0.5 MAX. UK A 1 C 1 0 2 M PD 15MIN MAX. Rated voltage (16V) 4MIN Series name (mm) 5 2.0 0.5 0.5 1.5 D P d 6.3 2.5 0.5 0.5 1.5 8 3.5 0.6 0.5 1.5 10 5.0 0.6 0.5 1.5 12.5(25L or smaller) 12.5(31.5L or greater) 5.0 5.0 0.6 0.8 0.5 0.5 1.5 1.5 16 7.5 0.8 0.5 1.5 18 7.5 0.8 0.5 1.5 Type D Pb-free leadwire Pb-free PET sleeve 5 6.3 8 *10 12.5 to 18 DD ED PD HD * Please refer to page 20 about the end seal configuration. Dimensions Cap (F) 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 15000 22000 V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 220 330 470 101 221 331 471 102 222 332 472 682 103 153 223 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 12.5 x 35.5 12.5 x 40 16 x 35.5 18 x 40 45 55 65 95 160 195 270 420 710 910 1120 1360 1650 2010 2350 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 25 12.5 x 35.5 12.5 x 40 16 x 35.5 18 x 40 45 58 68 105 175 240 280 500 810 1050 1300 1570 1890 2400 5 x 11 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 16 12.5 x 20 12.5 x 31.5 12.5 x 35.5 16 x 31.5 18 x 35.5 54 65 79 115 190 265 315 560 920 1270 1480 1780 2060 Frequency 22 to 47 100 to 470 1000 to 22000 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1kHz 1.57 1.34 1.13 58 68 83 140 240 290 380 680 1200 1400 1710 2040 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 25 12.5 x 40 16 x 35.5 18 x 35.5 61 75 93 150 260 350 460 860 1260 1610 1910 5 x 11 5 x 11 6.3 x 11 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 31.5 16 x 35.5 18 x 35.5 68 90 115 190 300 410 530 1040 1470 1770 Case size D x L(mm) Rated ripple Rated ripple current (mArms) at 105C 120Hz Frequency coefficient of rated ripple current Cap.(F) 5 x 11 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 31.5 12.5 x 35.5 16 x 31.5 18 x 35.5 10kHz or more 2.00 1.50 1.15 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 271 CAT.8100H