Super Micro C omputer, Inc. Contact Us About Us Products Advanced Search Support News Reseller Resource Center Where To Buy X8STi-F Products Motherboards Xeon Boards [ X8STi-F ] Key Features Links & Resources 1. Intel(R) CoreTM i7 / i7 Extreme Edition, and Intel(R) Xeon(R) 5600/5500/3600/3500 series processors (QPI up to 6.4 GT/s) 2. Intel(R) X58 Express Chipset 3. Up to 24GB DDR3 1333, 1066 & 800 ECC / non-ECC Un-Buffered DIMM 4. Dual Intel(R) 82574L Gigabit Ethernet Controller 5. 6x SATA (3.0Gbps) Ports RAID 0, 1, 5, 10 6. 1 (x16) PCI-Express 2.0, 1 (x8) PCI-Express, 1x 32-bit PCI Slot 7. Integrated IPMI 2.0 with Dedicated LAN 8. 8x USB (2 rear, 2 on-board, 2 headers) Product SKUs MBD-X8STi-F -O MBD-X8STi-F -B Physical Stats Form Factor Dimensions X8STi-F (Standard Retail Pack) X8STi-F (Bulk Pack) ATX 12" x 9.6" (30.5cm x 24.4cm) CPU System Bus LGA 1366 Socket Intel(R) CoreTM i7-980X, i7-975 and i7-965 Extreme Edition Intel(R) CoreTM i7 series Intel(R) Xeon(R) 5600/5500 series Intel(R) Xeon(R) 3600/3500 series QPI (up to 6.4 GT/s) System Memory Memory Capacity Memory Type DIMM Sizes Memory Voltage Error Detection Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin goldplated DIMMs 256MB, 512MB, 1GB, 2GB, 4GB 1.5 V Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel(R) x4 and x8 Single Device Data Correction (SDDC) On-Board Devices Chipset SATA IPMI Network Controllers VGA Super I/O Clock Generator Intel(R) X58 Express chipset ICH10R Intel ICH10R SATA (3.0Gbps) Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux) Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond(R) WPCM450 BMC 2x Intel(R) 82574L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) Matrox G200eW 16 MB DDR2 Winbond 83627DHG chip CK505 Input / Output Serial ATA Floppy LAN USB VGA Keyboard / Mouse Serial Port / Header 6 SATA ports 6 SATA hard drives supported 1 Floppy controller; 1.44 MB 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port 2x USB rear ports 2x USB on-board 2x USB internal header(4 ports) Total 8 USB 2.0 Compliant 1x VGA port PS/2 keyboard and mouse ports 1x Fast UART 16550 serial port 1x internal header I/O Panel * Please see this board's I/O Panel OS Compatibility * Please see our OS Compatibility Chart Parts List Tested HDD / SSD List Motherboard Manual Update Your BIOS IPMI Firmware Download the Latest Drivers and Utilities Chassis ( Optimized for X8STi-F ) CSE-811TQ-280 1U Chassis CSE-813MTQ-280C To support the new generation Intel(R) Important Xeon(R) processor-based motherboards, a Chassis Revision K chassis is recommended for Notes most models. Please talk to your sales representative or follow the link for details. Expansion Slots PCI-Express Processor/Cache Tested Memory List PCI System BIOS BIOS Type BIOS Features 1 (x16) PCI-e 2.0 slot 1 (x8) PCI-e slot 1x 32-bit PCI slot 32Mb SPI Flash EEPROM with AMI BIOS DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 Management Software Power Configurations IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor(R) III Watch Dog NMI ACPI / ACPM Power Management Main Switch Override Mechanism Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode for AC power recovery Internal/External modem ring-on PC Health Monitoring Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, Voltage VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control FAN Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Monitoring for CPU and chassis environment CPU thermal trip support Temperature FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI CPU / System Overheat LED LED +5V Standby alert LED Other Chassis intrusion detection Features Chassis intrusion header Operating Environment / Compliance RoHS 6/6 RoHS Environmental Spec. RoHS Compliant 6/6, Pb Free Operating Temperature: 10to 35C (50to 95F) Non-operating Temperature: -40to 70C (-40to 158F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) X8STi-F I/O Cables I/O Shield Quick Reference Guide Part Number MBD-X8STi-F -O CBL-022L CBL-0044L MCP-260-00027-0N MNL-1068-QRG Qty 1 1 6 1 1 Description X8STi-F Motherboard ATX Floppy Cable 2ft. Amphenol, SATA Cable Motherboard I/O Shield Quick Reference Guide Part Number SNK-P0037P BKT-0023L RSC-RR1U-E16 RSC-RR1U-E8 Qty - Description 1U Passive Heatsink for LGA1366 Socket Bracket for 1U passive heat sink (LGA 1366 socket) 1U PCI-E x16 Riser Card 1U PCI-E x8 Riser Card Optional Parts List Heat Sink Heat Sink Bracket Riser Card Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package. Terms & Conditions | Privacy | Investor Relations | Jobs | Site Map SuperServer(R) | Motherboard | Chassis | Rack Cabinet | SuperBlade(R) | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies Copyright (c) 2013 Super Micro Computer, Inc. Information in this document is subject to change without notice. O ther products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.