Super Micro C omputer, Inc.
Co ntact Us Adva nced Se arch R ese ller Re source C e nte r
Products Motherboards Xeon Boards [ X8STi-F ]
Key Features
1. Intel® Core i7 / i7 Extreme Edition,
and Intel® Xeon® 5600/5500/3600/3500
series processors (QPI up to 6.4 GT/s)
2. Intel® X58 Express Chipset
3. Up to 24GB DDR3 1333, 1066 & 800
ECC / non-ECC Un-Buffered DIMM
4. Dual Intel® 82574L Gigabit Ethernet
Controller
5. 6x SATA (3.0Gbps) Ports
RAID 0, 1, 5, 10
6. 1 (x16) PCI-Express 2.0,
1 (x8) PCI-Express,
1x 32-bit PCI Slot
7. Integrated IPMI 2.0 with Dedicated LAN
8. 8x USB (2 rear, 2 on-board, 2 headers)
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest
Drivers and Utilities
Product SKUs
MBD-X8STi-F
-O X8STi-F (Standard Retail Pack)
MBD-X8STi-F
-B X8STi-F (Bulk Pack)
Physical Stats
Form Factor ATX
Dimensions 12" x 9.6" (30.5cm x 24.4cm)
Processor/Cache
CPU
LGA 1366 Socket
Intel® Core i7-980X, i7-975 and i7-965
Extreme Edition
Intel® Core i7 series
Intel® Xeon® 5600/5500 series
Intel® Xeon® 3600/3500 series
System Bus QPI (up to 6.4 GT/s)
System Memory
Memory
Capacity
Supports up to 24 GB 1333 / 1066 /
800MHz DDR3 ECC / non-ECC Un-Buffered
memory
Three Channel memory bus
6 DIMM sockets
Memory
Type
1333 / 1066 / 800MHz Un- Buffered ECC /
non-ECC DDR3 SDRAM 72-bit, 240-pin gold-
plated DIMMs
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
Memory
Voltage 1.5 V
Error
Detection
Corrects single-bit errors
Detects double-bit errors (using ECC
memory)
Supports Intel® x4 and x8 Single Device
Data Correction (SDDC)
On-Board Devices
Chipset Inte X58 Express chipset
ICH10R
SATA
Intel ICH10R SATA (3.0Gbps) Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management
Interface v.2.0
IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
Winbond® WPCM450 BMC
Network
Controllers
2x Intel® 82574L Gigabit Ethernet
Controllers
Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA Matrox G200eW 16 MB DDR2
Super I/O Winbond 83627DHG chip
Clock
Generator CK505
Input / Output
Serial ATA 6 SATA ports
6 SATA hard drives supported
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
2x USB rear ports
2x USB on-board
2x USB internal header(4 ports)
Total 8 USB 2.0 Compliant
VGA 1x VGA port
Keyboard /
Mouse PS/2 keyboard and mouse ports
Serial Port /
Header
1x Fast UART 16550 serial port
1x internal header
I/O Panel
Please see this board's I/O Panel
OS Compatibility
Please see our OS Compatibility Chart
Chassis ( Optimized for X8STi-F )
1U Chassis CSE-811TQ-280
CSE-813MTQ-280C
Important
Chassis
Notes
To support the new generation Intel®
Xeon® processor-based motherboards, a
Revision K chassis is recommended for
most models. Please talk to your sales
representative or follow the link for details.
Expansion Slots
PCI-Express 1 (x16) PCI-e 2.0 slot
1 (x8) PCI-e slot
PCI 1x 32-bit PCI slot
System BIOS
BIOS Type 32Mb SPI Flash EEPROM with AMI BIOS
BIOS
Features
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
IPMI (Intelligent Platform Management
Interface) v1.5 / 2.0 with KVM support
SuperDocto III
Watch Dog
NMI
Power
Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode for AC power recovery
Internal/External modem ring-on
PC Health Monitoring
Voltage
Monitors for CPU Cores, +1.8V, +3.3V,
+5V, ±12V, +3.3V Standby, +5V Standby,
VBAT, HT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator with
auto-sense from 0.8375V-1.60V
FAN
Total of six fan headers supporting up to 6
fans
Six 4-pin fan headers
6x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan
connectors
Temperature
Monitoring for CPU and chassis
environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other
Features
Chassis intrusion detection
Chassis intrusion header
Operating Environment / Compliance
RoHS
RoHS 6/6
RoHS Compliant 6/6, Pb Free
Environmental
Spec.
Operating Temperature: 10°to 35°C (50°to
95°F)
Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
Operating Relative Humidity: 8% to 90%
(non-condensing)
Non-operating Relative Humidity: 5 to 95%
(non-condensing)
Parts List
X8STi-F
About Us Products Support News Where To Buy
Part Number Qty Description
X8STi-F MBD-X8STi-F -O 1 X8STi-F Motherboard
I/O Cables CBL-022L
CBL-0044L
1
6
ATX Floppy Cable
2ft. Amphenol, SATA Cable
I/O Shield MCP-260-00027-0N 1 Motherboard I/O Shield
Quick Reference Guide MNL-1068-QRG 1 Quick Reference Guide
Optional Parts List
Part Number Qty Description
Heat Sink SNK-P0037P - 1U Passive Heatsink for LGA1366 Socket
Heat Sink Bracket BKT-0023L - Bracket for 1U passive heat sink (LGA 1366 socket)
Riser Card RSC-RR1U-E16
RSC-RR1U-E8
-
-
1U PCI-E x16 Riser Card
1U PCI-E x8 Riser Card
Note: Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Terms & Conditions | Privacy | Investor Relations | Jobs | Site Map
SuperServe | Motherboard | Chassis | Rack Cabinet | SuperBlade® | Embedded | Networking | Storage | Accessories | AMD Solution | Power Supplies
Copyright © 2013 Super Micro Computer, Inc.
Information in this document is subject to c hange without notic e.
O ther products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.