V A C U U M S C H M E L Z E
Specification
Item No.:
T60403-K4085-X004
K-No.:
24741 Powerline transformer Date:
24.04.2015
Customer:
Standard Type Customers part No.:
Page 1 of 2
Editor:
KB-E
Design:
Bs
KB-PM: Pf.
check
released: HH
Copying of this document, disclosing it to third parties or using the contents there for any
purposes without express written authorization by use illegally forbidden.
Any offenders are liable to pay all relevant damages.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten
Mechanical outline (mm):
(General Tolerances DIN ISO 2768-c)
Toleranz der Stiftabstände ±0,2mm
(Tolerances grid distance) DC = Date Code
F = Factory
Kennzeichnung Stift1
(marking pin 1)
10,4
7,62
2,54
8,5 7,0
14
5 8
11,5 3,5±0,5
F DC
0,5x0,5
Schematic diagram:
1
N1
4
8
N2
5
Operational data/characteristic data (nominal values):
f = 10 kHz … 1 MHz
I
RMS
< 30 mA (50/60Hz)
R
Cu1
≤ 200 mΩ R
Cu2
≤ 200 mΩ
L
S1-2
≤ 0,80 µH* C
K1-2
≤ 25 pF*
Operating temperature: -40 °C ... +125 °C
Storage temperature: -40 °C ... +85 °C
* preliminary
Inspection:
(V: 100%-Test; AQL...: DIN ISO 2859-Teil1)
1) (V) M3014: U
p,eff
= 4.0 kV, 2 s, N
1
vs N
2
2) (AQL 0,25) M3011/1: L
1
= 1,4 mH + / - 30 %, f = 10 kHz, U
AC,eff
= 100 mV
3) (V) M3011/6: Polarity, Turns ratio: Tolerance ± 2 %
4) (Fix 05) M3290: solderability test acc. to chapter 1
5) (AQL 1/S4) M3200 Mechanical test
See page 2
Applicable documents:
Designed, manufactured and tested in accordance to EN 60950 (IEC 950) and complies with the standards
Parameters: Reinforced insulation: N1
→
N2
Working voltage: 300 V Pollution degree: 2
Insulation category: 2 Material group: 2
Housing material, casting resin and wire UL - listed
Date Name Index Change
24.04.15 Bs 83 Typo: storage temperature changed from +120°C
+85°C. lapidary change
22.07.14 Pf 83 Characteristic data: I
DC
< 30 mA changed to I
RMS
< 30 mA (50/60Hz). Lapidary change
Connections:
ü = 1 : 1
DC
4085X004
F
Beschriftung:
marking
V A C U U M S C H M E L Z E
Specification
Item No.:
T60403-K4085-X004
K-No.:
24741 Powerline transformer Date:
24.04.2015
Customer:
Standard Type Customers part No.:
Page 2 of 2
Editor:
KB-E
Design:
Bs
KB-PM: Pf.
check
released: HH
Copying of this document, disclosing it to third parties or using the contents there for any
purposes without express written authorization by use illegally forbidden.
Any offenders are liable to pay all relevant damages.
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten
Type test:
1) HV transient test according to M3064
N1 vs N2
Settings: 10 µs / 700 µs-waveform
U
P,max
= 10 kV
R
i
= 40 Ω
10 pulses in a cycle of t = 10 seconds with changing polarity
2) M3014: U
p,eff
= 4.0 kV, 60 s, N
1
vs N
2
3) M3292: Resistance to soldering heat acc. to chapter 1
Measurements after temperature balance of the test samples at room temperature
