Product Specification AU OPTRONICS CORPORATION G156XW01 V1 ( V ) Preliminary Specification ( ) Final Specification Module 15.6" Color TFT-LCD Model Name G156XW01 V1 Customer Date Approved by Approved by Date Debblie Chiu 2011/5/24 Prepared by Wennie Lee Note: This Specification is subject to change without notice. document version 0.0 2011/5/24 Desktop Display Business Group / AU Optronics corporation 1 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 Contents 1.0 Handling Precautions............................................................. 4 2.0 General Description ............................................................... 5 2.1 Display Characteristics.................................................................................................................... 5 2.2 Optical Characteristics .................................................................................................................... 6 3.0 Functional Block Diagram .................................................... 10 4.0 Absolute Maximum Ratings ................................................. 11 4.1 TFT LCD Module............................................................................................................................ 11 4.2 Absolute Ratings of Environment................................................................................................ 11 5.0 Electrical characteristics...................................................... 12 5.1 TFT LCD Module............................................................................................................................ 12 5.2 Backlight Unit.................................................................................................................................. 14 6.0 Signal Characteristic............................................................ 15 6.1 Pixel Format Image........................................................................................................................ 15 6.2 The input data format .................................................................................................................... 15 6.3 Signal Description.......................................................................................................................... 16 6.4 Timing Characteristics ......................................................................................................... 18 6.5 Timing diagram.................................................................................................................... 19 6.6 Power ON/OFF Sequence .................................................................................................. 20 7.0 Connector & Pin Assignment ............................................... 21 7.1 TFT LCD Module............................................................................................................................ 21 7.2 Backlight Unit.................................................................................................................................. 22 8.0 Reliability Test..................................................................... 23 9.0 Shipping Label ..................................................................... 24 10.0 Mechanical Characteristics ................................................ 25 document version 0.0 2 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 Record of Revision Version and Date 0.0 2011/5/24 document version 0.0 Page Old description First Edition for Customer N/A New Description Remark 3 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 1.0 Handling Precautions 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) Since front polarizer is easily damaged, pay attention not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. Do not open or modify the Module Assembly. Do not press the reflector sheet at the back of the module to any directions. In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the LED reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may be damaged. At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. Severe temperature condition may result in different luminance, response time. Continuous operating TFT-LCD Module under high temperature environment may accelerate LED light bar exhaustion and reduce luminance dramatically. The data on this specification sheet is applicable when TFT-LCD module is placed in landscape position. Continuous displaying fixed pattern may induce image sticking. It's recommended to use screen saver or moving content periodically if fixed pattern is displayed on the screen. document version 0.0 4 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 2.0 General Description This specification applies to the 15.6 inch-wide Color a-Si TFT-LCD Module G156XW01.The display supports the HD - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits + Hi-FRC data). All input signals are LVDS interface and this module doesn't contain an inverter board for backlight. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 ITEMS Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode White Luminance ( Center ) Contrast Ratio Optical Response Time Nominal Input Voltage VDD LCD Power Consumption LED Power Consumption Weight Physical Size Electrical Interface Support Color Surface Treatment RoHS Compliance Temperature Range Operating Storage (Non-Operating) document version 0.0 NUMPAGES 29 Unit [mm] [mm] [um] [cd/m2] [msec] [Volt] [Watt] [Watt] [g] [mm] [oC] [oC] condition: SPECIFICATIONS 15.6" 344.232 (H) x 193.536 (V) 1366(x3) x 768 252 (per one triad) x252 R.G.B. Vertical Stripe TN Mode, Normally White 2 300 cd/m (Typ.) 500 (Typ.) 8ms (Typ., on/off) +5.0 V 2.15 W (Typ.), 2.5 W (Max.) (all black pattern) 10.5 W (Typ.), 12 W (Max.) (all black pattern) 1250 (Typ.), 1350(Max.) 363.8(W) X 215.9(H) X 16.85 (D) Typ. One channel LVDS 16.7M colors (RGB 6-bit + Hi-FRC ) Anti-Glare, 3H RoHS Compliance 0 to +50 -20 to +60 5 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 oC: Item Viewing Angle Unit [degree] Contrast ratio Response Time Conditions Horizontal CR = 10 Vertical (Up) CR = 10 (Down) Horizontal (Right) CR = 5 (Left) Vertical (Up) CR = 5 (Down) Falling Time (TrF) Raising + Falling Red x Red y Green x Color / Chromaticity Coordinates (CIE) Green y Blue x Blue y Color Coordinates (CIE) White White x Central Luminance [cd/m ] Crosstalk (in 60Hz) [%] Luminance Uniformity Flicker document version 0.0 NUMPAGES 29 2 [%] dB White y Max. 70 70 80 80 - 75 75 75 75 Normal Direction [msec] Typ. 75 75 (Right) (Left) Raising Time (TrR) Min. 350 85 85 85 85 85 85 - - 6 9 - 8 13 2 0.641 0.691 0.276 0.326 0.376 0.567 0.098 0.014 0.263 0.279 240 75 0.343 0.617 0.148 0.064 0.313 0.329 300 80 3 4 0.591 0.293 1,2 - 500 - Note - 4 0.393 0.667 5 0.198 0.114 0.363 0.379 - 6 1.5 8 - 7 -20 9 6 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION Note 1: Measurement method The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring (at surface 35 oC). In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and dark room. Photo detector Measured distance LCD Panel TFT-LCD Module Center of the screen Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88) Viewing angle is the measurement of contrast ratio 10 and 5, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). The 180 viewing angle range is broken down as follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. document version 0.0 NUMPAGES 29 7 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 Note 3: Contrast ratio is measured by TOPCON SR-3 Note 4: Definition of Response time measured by Westar TRD-100A The output signals of photo detector are measured when the input signals are changed from "Full Black" to "Full White" (rising time, TrR), and from "Full White" to "Full Black" (falling time, TfF), respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of amplitudes. Optical response Tr F % Tr R 100 90 White 10 0 Black 1 Frame Black White 1 Frame TrR + TfF = 8 msec (typ.). Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3 Note 6: Central luminance is measured by TOPCON SR-3 Note 7: Luminance uniformity of these 9 points is defined as below and measured by TOPCON SR-3 Uniformity = document version 0.0 NUMPAGES 29 Minimum Luminance in 9 points (1 - 9) Maximum Luminance in 9 Points (1 - 9) 8 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 Note 8: Crosstalk is defined as below and measured by TOPCON SR-3 CT = | YB - YA | / YA x 100 (%), Where YA = Luminance of measured location without gray level 0 pattern (cd/m2) YB = Luminance of measured location with gray level 0 pattern (cd/m2) Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3 RGBRGB Gray Level = L127 RGBRGB Gray Level = L0 RGBRGB Method: Record dBV & DC value with TRD-100 Amplitude AC DC Flicker (dB) = 20 log document version 0.0 NUMPAGES 29 Time AC Level(at 30 Hz) DC Level 9 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 3.0 Functional Block Diagram The following diagram shows the functional block of the 15.6 inch Color TFT-LCD Module: I/F PCB Interface: JAE / FI-XB30SSL-HF15 STM / MSBKT2407P30HB Mating Type: FI-X30HL (Locked Type) document version 0.0 NUMPAGES 29 10 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 4.0 Absolute Maximum Ratings Absolute maximum ratings of the module are as following: 4.1 TFT LCD Module Item Logic/LCD Drive Voltage Symbol Min Max Unit Conditions Vin 0 6.0 [Volt] Note 1,2 4.2 Absolute Ratings of Environment Item Symbol Min. Max. Unit Operation Humidity HOP 5 90 [%RH] Storage Humidity HST 90 [%RH] Operating Temperature Storage Temperature TOP TST 0 -20 5 +50 +60 [ C] o Conditions [oC] Note 3 Note 1: With in Ta (25 oC) Note 2: Permanent damage to the device may occur if exceeding maximum values Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard). Operating Range document version 0.0 NUMPAGES 29 Storage Range 11 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 5.0 Electrical characteristics 5.1 TFT LCD Module 5.1.1 Power Specification Input power specifications are as following: Symbol Parameter VDD Logic/LCD Drive Voltage IDD Min Typ Max Unit 5.5 [Volt] 0.43 0.5 [A] - 2.15 2.5 [Watt] Inrush Current - - 2.5 [A] Allowable Logic/LCD Drive Ripple Voltage - - 300 [mV] p-p 4.5 5.0 Input Current - PDD VDD Power IRush VDDrp +/-10% Conditions VDD= 5.0V, All Black Pattern At 60Hz VDD= 5.0V, All Black Pattern At 60Hz Note 1 VDD= 5.0V, All Black Pattern At 60Hz Note 1: Measurement conditions: The duration of rising time of power input is 470 us. +5.0V D6 D5 D2 D1 Q3 AO6402 G R1 47K R2 2 C1 1uF/16V (LCD Module Input) Q3 AO6402 G S 1K SW1 VCC D1 D2 D5 D6 (High to Low) Control Signal F1 S C3 +12.0V SW MAG-SPST VR1 0.01uF/25V 1 47K C2 1uF/25V document version 0.0 NUMPAGES 29 12 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of SN75LVDS82DGG (Texas Instruments) in detail. Characteristics of each signal are as following: Symbol VTH VTL VID VICM Parameter Min Typ Max Units Differential Input Low Threshold - +50 +100 [mV] -100 -50 - [mV] Differential Input Common Mode Voltage +1.0 Differential Input High Threshold Input Differential Voltage 100 - +1.2 600 +1.5 [mV] [V] Condition VICM = 1.2V Note 1 VICM = 1.2V Note 1 Note 1 VTH-VTL = 200MV (max) Note 1 Note 1: LVDS Signal Waveform document version 0.0 NUMPAGES 29 13 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 5.2 Backlight Unit Parameter guideline for LED Inverter is under stable conditions at 25 oC (Room Temperature): Symbol Vcc Ivcc PLED FPWM IF Operating Life Parameter Input Voltage Input Current Power Consumption PWM Dimming Frequency Swing Voltage Dimming Duty Cycle LED Forward Current Min Typ - 0.88 200 - 20k - 100 - - 10.8 - A 10.5 12 - 80 Note 1: Ta means ambient temperature of TFT-LCD module. - 13.2 3.3 50000 Units 12 3 5 Max 5 Volt Watt Hz % mA Hrs Remark 100% Dimming 100% Dimming Ta = 25oC Ta = 25oC Note 2: If G156XW01 V1 module is driven at high ambient temperature & humidity condition. The operating life will be reduced. Note 3: Operating life means brightness goes down to 50% initial brightness. Min. operating life time is estimated data. document version 0.0 NUMPAGES 29 14 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 6.0 Signal Characteristic 6.1 Pixel Format Image Following figure shows the relationship of the input signals and LCD pixel format. 1 1st Line 768 Line 2 1365 1366 R G B R G B R GB R G B R G B R G B R GB R G B 6.2 The input data format CLKIN+ CLKINRIN0 +/- OG0 OR5 OR4 OR3 OR2 OR1 OR0 RIN1 +/- OB1 OB0 OG5 OG4 OG3 OG2 OG1 RIN2 +/- DE VS HS OB5 OB4 OB3 OB2 RIN3 +/- Rsvd OB7 OB6 OG7 OG6 OR7 OR6 Current Cycle Note 1: R/G/B data 7:MSB, R/G/B data 0:LSB document version 0.0 NUMPAGES 29 15 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 6.3 Signal Description The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a differential signal technology for LCD interface and high speed data transfer device. LVDS transmitters shall be SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels. PIN # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 SIGNAL NAME Reserved Reserved Reserved GND RXIN0RXIN0+ GND RXIN1RXIN1+ GND RXIN2RXIN2+ GND RXCLKINRXCLKIN+ GND RXIN3RXIN3+ GND Reserved Reserved Reserved GND GND GND AVDD AVDD AVDD AVDD AVDD document version 0.0 NUMPAGES 29 DESCRIPTION No Connection No Connection No Connection Ground -LVDS Differential Data Input, CH0 +LVDS Differential Data Input, CH0 Ground -LVDS Differential Data Input, CH1 +LVDS Differential Data Input, CH1 Ground -LVDS Differential Data Input, CH2 +LVDS Differential Data Input, CH2 Ground -LVDS Differential Clock Input, CH3 +LVDS Differential Clock Input, CH3 Ground -LVDS Differential Data Input, CH3 +LVDS Differential Data Input, CH3 Ground Internal used (recommend no connection ) Internal used (recommend no connection ) Internal used (recommend no connection ) Ground Ground Ground Power +5V, (typical) Power +5V, (typical) Power +5V, (typical) Power +5V, (typical) Power +5V, (typical) 16 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 Note1: Start from left side document version 0.0 NUMPAGES 29 17 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 6.4 Timing Characteristics Basically, interface timing described here is not actual input timing of LCD module but close to output timing of SN75LVDS82DGG (Texas Instruments) or equivalent. Item Symbol Min Typ Max Unit Data CLK Tclk 60 76 90 [MHz] Th 1446 1560 1936 [Tclk] H-section V-section Period Display Area Tdisp(h) 1366 1366 1366 [Tclk] Period Tv 778 806 888 [Th] Blanking Display Area Blanking Frame Rate Note : DE mode only document version 0.0 NUMPAGES 29 Tblk(h) 80 200 570 [Tclk] Tdisp(v) 768 768 768 [Th] F 50 60 75 [Hz] Tblk(v) 10 38 120 [Th] 18 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 6.5 Timing diagram document version 0.0 NUMPAGES 29 19 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 6.6 Power ON/OFF Sequence VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. VDD 90% 90% 10% 10% T Signal 1 VLED T T1 T1 T1 2 1 3 90% 10% 10% 90% 90% 10% Back light dimming 10% T T 4 5 T 8 9 10% T T 6 790% 10% T Parameter T1 T2 T1 3 Value Max. 0 40 50 [ms] 0.5 - 10 [ms] - - 0.5 T5 10 T7 10 - - [ms] [ms] [ms] [ms] - [ms] - - 10 [ms] 0.5 16 50 [ms] 1000 - - [ms] T10 110 T12 - T13 - 10 - 10 T11 - 0 T8 T9 Units Typ. 200 T6 0 Min. T3 T4 NUMPAGES 29 T 90% Back light on/off document version 0.0 2 90% - - - 100 [ms] [ms] [ms] 20 Product Specification G156XW01 V1 AU OPTRONICS CORPORATION 7.0 Connector & Pin Assignment Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. 7.1 TFT LCD Module Connector Name / Designation Manufacturer Type Part Number Mating Housing Part Number Interface Connector JAE STM / Interface card FI-XB30SSL-HF15 MSBKT2407P30HB FI-X30HL (Locked Type) 7.1.1 Pin Assignment Pin# 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 Signal Name Reserved Reserved RXIN0GND RXIN1+ RXIN2GND RXCLKIN+ RXIN3GND Reserved GND GND AVDD AVDD document version 0.0 NUMPAGES 29 Pin# 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Signal Name Reserved GND RXIN0+ RXIN1GND RXIN2+ RXCLKINGND RXIN3+ Reserved Reserved GND AVDD AVDD AVDD 21 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 7.2 Backlight Unit Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. Connector Name / Designation LED Connector Manufacturer E&T or compatible Connector Model Number 3808K-F05N-02R or compatible Mating Connector Model Number H208K-P05N-02B or compatible 7.2.1 LED Driver Connector Pin Assignment Pin# Symbol Signal Name 2 GND GND 1 3 4 5 document version 0.0 NUMPAGES 29 Vcc Enable Dimming NC 12V 5V-On / 0V-Off PWM Dimming NC 22 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 8.0 Reliability Test Environment test conditions are listed as following table. Items Temperature Humidity Bias (THB) Required Condition Ta= 50 C, 80%RH, 300hours High Temperature Operation (HTO) Ta= 50 oC, 50%RH, 300hours High Temperature Storage (HTS) Ta= 60 oC, 300hours Vibration Test (Non-operation) Acceleration: 1.5 Grms Wave: Random Frequency: 10 - 200 Hz Duration: 30 Minutes each Axis (X, Y, Z) Low Temperature Operation (LTO) Low Temperature Storage (LTS) Shock Test (Non-operation) Drop Test Thermal Shock Test (TST) On/Off Test ESD (Electro Static Discharge) Altitude Test Note o Ta= 0 oC, 300hours Ta= -20 oC, 300hours Acceleration: 50 G Wave: Half-sine Active Time: 20 ms Direction: X, Y, Z (one time for each Axis) Height: 46 cm, package test -20 oC /30min, 60 oC /30min, 100 cycles On/10sec, Off/10sec, 30,000 cycles Contact Discharge: 8KV, 150pF(330 ) 1sec, 15 points, 25 times/ point. Air Discharge: 15KV, 150pF(330 ) 1sec 15 points, 25 times/ point. 1 2 Operation:10,000 ft Non-Operation:30,000 ft Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change. A cycle of rapid temperature change consists of varying the temperature from -20 oC to 60 oC, and back again. Power is not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. Note 2: EN61000-4-2, ESD class B: Certain performance degradation allowed No data lost Self-recoverable No hardware failures. document version 0.0 NUMPAGES 29 23 Product Specification AU OPTRONICS CORPORATION G156XW01 V1 9.0 Shipping Label The label is on the panel as shown below: G156XW01 V1 Note 1: For Pb Free products, AUO will add for identification. Note 2: For RoHS compatible products, AUO will add for identification. Note 3: For China RoHS compatible products, AUO will add for identification. Note 4: The Green Mark will be presented only when the green documents have been ready by AUO Internal Green Team. document version 0.0 NUMPAGES 29 24 10.0 Mechanical Characteristics Ver 0.1 Ver 0.1