Download Cable Solutions from Xilinx Features: MultiLINX Cable * Superior speed: Configures V1000 device in SelectMAPTM mode in less than 5 seconds * Automatic support for 5V, 3.3V, and 2.5V standards/target systems * CE certified and USB compliant * Accepts any supply voltage from 2.5V to 5V as power input (from target application or external power supply) * Comes with USB cable, RS-232 cable, DB25M to DB9M adapter, and DB25F to DB9M adapter * Software reconfigurable * Interfaces to target hardware with 4 sets of versatile flying wires: JTAG, Slave Serial, and SelectMAP mode * Supports JTAG (IEEE 1149.1) configuration for: - Virtex-II/Pro, Virtex Series, Spartan Series, XC4000 Series, and XC5200 FPGAs The MultiLINX cable takes advantage of the USB port found on newer PCs. MultiLINX features an adjusting voltage that enables it to talk to system and I/Os operating at 5V, 3.3V, and 2.5V. - CoolRunner-II, CoolRunner, and XC9500 Series CPLDs Feature Comparison Chart Parallel Cable IV MultiLINX HW-PC4 HW-MULTILINX Connects to PC Parallel Port (DB25) USB & Standard RS-232 OS Support Windows 98/NT (4.0+)/2000 Windows 98/NT (4.0+)/2000, Sun Solaris, HP-UX Device Support All Xilinx FPGAs, CPLDs, System ACE MPMs, and ISP PROMs All Xilinx FPGAs, CPLDs, System ACE MPMs, and ISP PROMs Configuration Modes JTAG (IEEE 1149.1), Slave Serial, IEEE 1532 JTAG (IEEE 1149.1), Slave Serial, SelectMAP Board Interface Comes with a robust ribbon cable but flying wires can also be used (flying wires sold separately) Comes with (4) sets of flying wires FPGA Readback No Yes Serial Port Adapets N/A Comes with (2) DB9 to DB25 adapters; (1) males and (1) female I/O Voltage Support 1.5V, 1.8V, 2.5V, 3.3V, and 5V 2.5V, 3.3V, and 5V $95 USD $495 USD - ISP PROMs (XC18V00) - System ACE MPM * Supports serial download, verification and debug for any size Virtex-II/Pro, Virtex Series, Spartan Series, XC4000 Series, and XC5200 Part Number FPGAs Price Parallel Cable IV (PC only) Features: * * * * * * * Downloads to all Xilinx FPGAs, CPLDs, ISP PROMs, and System ACE MPM using JTAG (IEEE 1149.1) or Slave Serial modes Automatically adjusts to operating voltages from 1.5V to 5V Speeds up to 5Mbps Draws power directly from the PC (through the mouse/keyboard port) or an external power supply Comes with a robust ribbon cable Backward compatible to Parallel Cable III using the flying wires Interfaces to PC printer port The Parallel Cable IV from Xilinx is a very cost effective solution that interfaces with the printer port on your PC. The PCIV comes with a robust ribbon cable that enables you to perform JTAG and Slave Serial configurations at the highest speeds. For more information about Xilinx cables, or to purchase a cable, please visit the Xilinx website. http://www.xilinx.com Turn this card over to see the cable feature comparison chart. Corporate Headquarters Europe Japan Asia Pacific Xilinx, Inc. Xilinx, Ltd. Xilinx, K.K. Xilinx, Asia Pacific 2100 Logic Drive Benchmark House Shinjuku Square Tower 18F Unit 1201, Tower 6, Gateway San Jose, CA 95124 203 Brooklands Road 6-22-1 Nishi-Shinjuku 9 Canton Road Tel: (408) 559-7778 Weybridge Shinjuku-ku, Tokyo Tsimshatsui, Kowloon, Fax: (408) 559-7114 Surrey KT13 ORH 163-1118, Japan Hong Kong Web: www.xilinx.com United Kingdom Tel: 81-3-5321-7711 Tel: 852-2-424-5200 Tel: 44-870-7350-600 Fax: 81-3-5321-7765 Fax: 852-2-494-7159 Fax: 44-870-7350-601 Web: www.xilinx.co.jp E-mail: hongkong@xilinx.com The Programmable Logic CompanySM Web: www.xilinx.com (c)2002, Xilinx, Inc. All rights reserved. The Xilinx name and the Xilinx logo are registered trademarks, Spartan, Virtex, SelectMAP, MultiLINX, and all XC-designated products are trademarks, and The Programmable Logic Company is a service mark of Xilinx, Inc. All other trademarks and registered trademarks are the property of their respective owners. Printed in U.S.A. PN 0010475-2