ID TOOLS 5-D Appropriate insulation displacement tools and machines are indispensable for efficient production of a variety of insulation displacement connection wire harnesses. JST offers virtually all kinds of insulation displacement tools and machines, ranging from repair-use tools to fully-automatic machines. Please select the model ideally suited for your wire harness specifications (type of wire, shaped of wire harness, etc.), production output and on-side conditions. Contact JST for details. Note 1:MKD-LP applicators are not applicable to the connectors with glassfilled nylon housings i.e. 12 to 15-circuit DD/DS connectors and 13 to 16-circuit KR connectors. 2:End-connection only (not through processing) Hand press: HPD-M2A Pneumatic press: APD-M2 Hand press: HPD-M2A Hand press: HPD-M2A-HID Applicator Applicator Applicator H2A series 13 H2 series 16 HID series 14 Pneumatic press: APD-M2 Electric press: AP-K2N Pitch-feeding applicator MKD-LP with die set 12 Connector Pitch mm(in.) Series 1.0(.039) SR H2A-SR H2-SR20ED-X -- ZR H2A-ZR H2-ZR20ED-X -- MKD-LP+MKD-DS-ZR ZA H2A-ZA H2-ZA20ED-X -- MKD-LP+MKD-DS-ZA KR H2A-KR H2-KR20ED-X -- MKD-LP+MKD-DS-KR (Note 1) H2A-KRD H2-KRD20DD-Y -- CR H2A-CR H2-CR20ED-X -- DR H2A-DR H2-DR20ED-X -- MKD-LP+MKD-DS-DR DA H2A-DA H2-DA20ED-X -- MKD-LP+MKD-DS-DA H2A-DD/DS H2-DD/DS20ED-X -- MKD-LP+MKD-DS-DD/DS (Note 1) H2A-NR H2-NR20ED-X -- MKD-LP+MKD-DS-NR H2A-NRD H2-NRD20DD-Y -- MKD-LP+MKD-DS-NRD(Note 2) HR H2A-HR H2-HR20ED-X -- MKD-LP+MKD-DS-HR DB H2A-DB H2-DB20ED-X -- MKD-LP+MKD-DS-DB/DC DG H2A-DG -- MKD-LP+MKD-DS-DG BR H2A-BR -- MKD-LP+MKD-DS-BR 1.5(.059) KRD 2.0(.079) DD DS NR NRD 2.5(.098) 2.54(.100) 3.96(.156) H2-BR20ED-X -- -- RA -- -- HID-RA/RX -- RC -- -- HID-RC -- RX -- -- HID-RA/RX VR Ribbon cable cutter 18 -- -- H2A-VR H2-VR15DD-Y -- -- -- HID-FC -- MKD-LP+MKD-DS-VR(Note 2) -- ID TOOLS HPD-M2A (-HID) AP-K2N 8 11 APD-M2 9 Pneumatic press: APD-M2 Electric press: AP-K2N, -KS Applicator MKD-LR With die set AP-D2 IDB-12 10 17 Pneumatic press: AP-D2 Pistol tool: IDB-12 Applicator Head adaptor FP series 15 [Made in Germany] IDH series Connector -- -- -- -- -- -- -- IDH-ZR12 Series Pitch mm(in.) SR 1.0(.039) ZR -- ZA -- KRD -- CR MKD-LR+MKD-LR-DS-KR -- -- -- -- -- -- -- IDH-DR12 DR MKD-LR+MKD-LR-DS-DA -- IDH-DA12 DA -- -- IDH-DD/DS12 -- -- IDH-NR12 IDH-KR12 1.5(.059) KR 2.0(.079) DD DS NR -- -- MKD-LR+MKD-LR-DS-HR -- IDH-HR12 HR MKD-LR+MKD-LR-DS-DB -- IDH-DB/DC12 DB -- NRD 2.5(.098) -- -- -- DG -- -- -- BR -- FCD-DS FP-RA/RX -- RA -- FCD-DS FP-RC -- RC -- FCD-DS FP-RA/RX -- RX -- Ribbon cable cutter -- -- -- -- IDH-VR12 VR 2.54(.100) 3.96(.156) 19