Capacitors with Solder Pins 85 C Not for new design B 41 306 B 43 306 GP grade Standard type with high ripple current capability Rated voltage up to 500 V- Construction Charge-discharge proof, polar Aluminum case, fully insulated Overload protection by preset break point in case Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB Negative pole brought out to solder pin, but not insulated from case Features Standard type with high ripple current capability Welded terminal connections ensure secure contacts and high reliability Low series resistance and low self-inductance Pinning ensures correct insertion Applications Preferred components for switch-mode power supplies in consumer electronics Industrial applications, e.g. control systems Specifications and characteristics in brief B 41 306 B 43 306 Rated voltage UR 16 ... 100 V- 250 ... 500 V- Spitzenspannung US 1,15 * UR 1,15 * UR (for UR 250 V-) 1,10 * UR (for UR 385 V-) Rated capacitance CR 470 ... 47 000 F 33 ... 1 000 F Capacitance tolerance - 10/+ 50 % - 10/+ 50 % T T Useful life 40 C, UR 85 C, UR; I~R > 200 000 h (1,5 * I~R,85C) > 4 000 h > 200 000 h (1,7 * I~R,85C) > 5 000 h Failure percentage 1% (during useful life) 1% (during useful life) Failure rate 40 fit ( 40 * 10- 9/h) 40 fit ( 40 * 10- 9/h) Voltage endurance test 2 000 h, 85 C (at UR) 2 000 h, 85 C (at UR) Leakage current Ilka (5 min, 20 C) 156 C R U R 0,7 I lka 0,3 A -------- -------- + 4 A F V Siemens Matsushita Components B 41 306 B 43 306 Not for new design Specifications and characteristics in brief B 41 306 B 43 306 Self-inductance LESL approx. 10 nH IEC climatic category in accordance with IEC 68-1 385 V-: 40/085/56 (-40 C/+85 C, 56 days damp heat test) 400 V-: 25/085/56 (-25 C/+85 C, 56 days damp heat test) Detail specification similar to CECC 30 301-047 Sectional specification IEC 384-4 Vibration resistance in accordance with IEC 68-2-6, test Fc: frequency range 10 ... 55 Hz, duration 3 x 2 h for d = 25 mm: displacement amplitude 0,75 mm, acceleration max. 10 g for d 30 mm: displacement amplitude 0,35 mm, acceleration max. 5 g Siemens Matsushita Components 157 B 41 306 B 43 306 Not for new design Dimensional drawing d = 25 mm d = 25 mm 2 d = 40 mm 1 d max 4 15 1) 15 7,50,1 200,1 o1,3+0,1 3 o1,3+0,1 1 1 2 12,50,1 2 17,50,1 4 200,1 3 150,1 100,1 + + + + + + + 1) Mounting holes (view onto solder side) 1 o1,3+0,1 d 1) l 1) l max 25 d = 40 mm d = 30 und 35 mm 2 3 17,50,1 4,50,5 25 d = 30 and 35 mm 3 0,8x1,1 _ 0,1 KAL0402-Q For d = 25 and 30 mm: Plus and minus pole markings on the shrunk-on insulating sleeve. For d = 35 and 40 mm: Pole markings on the terminal. Plus: 1; Minus: - All pin holes must be drilled into the PC-board, since the unconnected pins serve as mountings. These pins must be soldered to isolated pads or pads with the same potential as the negative pole. Dimensions (mm) dxl 25 x 30 25 x 35 25 x 40 30 x 35 30 x 40 30 x 45 30 x 50 30 x 55 30 x 70 35 x 45 35 x 50 40 x 50 40 x 55 40 x 70 40 x 100 40 x 105 d max x l max 25,8 x 34 25,8 x 39 25,8 x 44 30,8 x 39 30,8 x 44 30,8 x 49 30,8 x 54 30,8 x 59 30,8 x 74 35,8 x 49 35,8 x 54 40,8 x 54 40,8 x 59 40,8 x 74 40,8 x 104 40,8 x 109 Approximate weight (g) 22 22 29 32 36 36 42 46 58 53 59 76 83 103 153 160 Packing units Pieces 384 256 256 240 160 160 160 160 80 144 44 96 96 48 48 48 1) Permissible range of positions for pole identification marks. 158 Siemens Matsushita Components B 41 306 B 43 306 Not for new design Overview of available types Type B 41 306 UR (V-) CR (F) 470 1 000 2 200 4 700 10 000 22 000 47 000 16 25 Case dimensions d x l (mm) 25 x 30 30 x 40 30 x 70 40 x 70 25 x 30 30 x 40 30 x 50 40 x 70 40 63 100 30 x 40 30 x 40 30 x 50 25 x 40 30 x 40 35 x 50 40 x 70 400 450 500 30 x 35 30 x 35 30 x 45 30 x 30 x 30 x 30 x 25 x 30 x 30 x 30 x 35 x 40 x 40 x 50 40 x 100 40 x 55 40 x 105 25 x 40 30 x 40 35 x 50 40 x 70 Type B 43 306 UR (V-) CR (F) 33 47 68 100 150 220 30 x 40 330 470 1 000 30 x 50 40 x 70 250 385 Case dimensions d x l (mm) 25 x 40 30 x 40 30 x 40 30 x 40 30 x 50 35 x 45 40 x 70 40 x 100 35 40 45 55 35 35 40 55 50 50 40 x 70 40 x 100 The capacitance and voltage ratings listed above are available in different cases upon request. Other capacitance and voltage ratings are also available upon request. Siemens Matsushita Components 159 B 41 306 B 43 306 Not for new design Technical data and ordering codes UR CR V- F B4130616 4 700 10 000 22 000 47 000 25 2 200 4 700 10 000 22 000 40 2 200 4 700 10 000 63 1 000 2 200 4 700 10 000 100 470 1 000 2 200 4 700 B43306250 100 220 470 1 000 385 100 150 220 220 330 470 1 000 Case dimensions dxl mm RESR, typ 100 Hz 20 C m RESR, max 100 Hz 20 C m Zmax 10 kHz 20 C m I~max 100 Hz 40 C A I~R 100 Hz 85 C A Ordering code 1) 25 x 30 x 30 x 40 x 25 x 30 x 30 x 40 x 30 x 30 x 30 x 25 x 30 x 35 x 40 x 25 x 30 x 35 x 40 x 30 40 70 70 30 40 50 70 40 40 50 40 40 50 70 40 40 50 70 48 34 24 17 60 39 26 19 48 30 20 75 44 27 19 110 67 38 24 95 63 41 30 112 68 47 32 86 54 36 135 77 49 32 234 126 72 45 81 54 36 27 90 54 36 27 72 45 31 83 54 36 27 108 63 40 27 5,5 7,5 11 15 4,9 7,0 9,3 14 6,4 8,1 12 4,6 6,7 9,9 15 3,8 5,2 8,4 12 1,9 2,6 3,7 5,0 1,7 2,4 3,2 4,7 2,2 2,8 3,2 1,6 2,3 3,4 4,4 1,3 1,8 2,9 4,2 -F4478-T -E4109-T -E4229-T -E4479-T -F5228-T -E5478-T -E5109-T -E5229-T -E7228-T -E7478-T -F7109-T -E8108-T -E8228-T -E8478-T -F8109-T -E9477-T -E9108-T -E9228-T -E9478-T 25 x 40 30 x 40 30 x 50 40 x 70 30 x 40 30 x 40 30 x 40 30 x 50 35 x 45 40 x 70 40 x 100 540 250 120 54 470 320 220 220 140 100 47 1350 630 300 160 1180 800 550 550 370 250 120 1100 500 240 120 900 600 410 410 280 190 90 1,7 2,9 3,8 8,1 2,0 2,3 3,2 3,2 4,1 5,8 9,6 0,60 1,0 1,3 2,8 0,70 0,80 1,1 1,1 1,4 2,0 3,3 -E2107-T -E2227-T -F2477-T -E2108-T -E107-T -E157-T -G227-T -E227-T -E337-T -E477-T -E108-T Short code 1) For instructions on how to determine ordering codes, refer to page 161. 160 Siemens Matsushita Components B 41 306 B 43 306 Not for new design Technical data and ordering codes UR CR V- F B43306400 100 150 220 470 1 000 450 68 100 150 220 470 1 000 500 33 47 68 100 150 220 330 470 Case dimensions dxl mm RESR, typ 100 Hz 20 C m RESR, max 100 Hz 20 C m Zmax 10 kHz 20 C m I~max 100 Hz 40 C A I~R 100 Hz 85 C A Ordering code 1) 30 x 35 30 x 35 30 x 45 40 x 50 40 x 100 30 x 35 30 x 40 30 x 45 30 x 55 40 x 55 40 x 105 25 x 35 30 x 35 30 x 40 30 x 55 35 x 50 40 x 50 40 x 70 40 x 100 890 590 400 190 88 1400 960 640 440 210 96 2900 2100 1400 960 640 440 290 210 1500 980 670 320 150 3300 2200 1500 1000 470 220 6500 4700 3300 2200 1500 1000 650 470 1250 820 560 270 130 2750 1830 1250 830 390 180 5400 3900 2700 1800 1300 830 540 390 1,8 2,2 2,8 5,1 9,7 1,5 1,9 2,4 3,1 6,3 9,9 0,90 1,2 1,5 2,0 2,6 3,3 4,6 6,4 0,61 0,75 0,99 1,8 3,4 0,50 0,64 0,82 1,1 1,8 3,4 0,31 0,40 0,51 0,69 0,90 1,1 1,6 2,2 -F107-T -F157-T -F227-T -F477-T -F108-T -A5686-T -B5107-T -A5157-T -B5227-T -A5477-T -A5108-T -A6336-T -A6476-T -A6686-T -A6107-T -A6157-T -A6227-T -A6337-T -A6477-T Short code 1) To obtain the required ordering code, prefix the type number to the short code. E. g.: B43306-F107-T B41306-... (UR = 16 ... 100 V-) B43306-... (UR = 250 ... 500 V-) Siemens Matsushita Components 161 B 41 306 B 43 306 Not for new design Useful life versus ambient temperature TA under ripple current operating conditions 1) UR = 16 ... 100 V- I~ I~R, 85C UR = 250 ... 500 V- I~ I~R, 85C 1) Refer to page 34 for an explanation on how to interpret the useful life graphs. 162 Siemens Matsushita Components Not for new design B 41 306 B 43 306 Permissible ripple current I~ versus frequency f UR 100 V- Permissible ripple current I~ versus frequency f UR 250 V- Equivalent series resistance RESR versus frequency f Typical behavior UR 100 V- Equivalent series resistance RESR versus frequency f Typical behavior UR 250 V- Siemens Matsushita Components 163 B 41 306 B 43 306 Impedance Z versus frequency f Typical behavior UR 100 V- 164 Not for new design Impedance Z versus frequency f Typical behavior UR 250 V- Siemens Matsushita Components