Original Creation Date: 12/03/99
Last Update Date: 02/13/03
Last Major Revision Date:
MNLM136A-2.5-X-RH REV 0E0 MICROCIRCUIT DATA SHEET
2.5V REFERENCE DIODE, GUARANTEED TO 100K RAD(Si)
TESTED TO MIL-STD-883, METHOD 1019.5
General Description
The LM136A-2.5 integrated circuit is a precision 2.5V shunt regulator diode. This
monolithic IC voltage reference operates as a low-temperature-coefficient 2.5V zener with
0.2 Ohms dynamic impedance. A third terminal on the LM136A-2.5 allows the reference
voltage and temperature coefficient to be trimmed easily.
The LM136A-2.5 is useful as a precision 2.5V low voltage reference for digital voltmeters,
power supplies or op amp circuitry. The 2.5V makes it convenient to obtain a stable
reference from 5V logic supplies. Further, since the LM136A-2.5 operates as a shunt
regulator, it can be used as either a positive or negative voltage reference.
NS Part Numbers
LM136AH-2.5-SMD
LM136AH-2.5/883
LM136AH-2.5RQML
LM136AH-2.5RQV
Industry Part Number
LM136A
Prime Die
LM136
Controlling Document
SEE FEATURES SECTION
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MICROCIRCUIT DATA SHEET
MNLM136A-2.5-X-RH REV 0E0
Features
- Low temperature coefficient
- Wide operating current of 400uA to 10mA
- 0.2 Ohms dynamic impedance
- +1% initial tolerance available
- Guaranteed temperature stability
- Easily trimmed for minimum temperature drift
- Fast turn-on
- Three lead transistor package
CONTROLLING DOCUMENTS:
LM136AH-2.5-SMD 5962-0050101QXA
LM136AH-2.5/883 8418003XA
LM136AH-2.5RQML 5962R0050101QXA
LM136AH-2.5RQV 5962R0050101VXA
2
MICROCIRCUIT DATA SHEET
MNLM136A-2.5-X-RH REV 0E0
(Absolute Maximum Ratings)
(Note 1)
Reverse Current 15mA
Forward Current 10mA
Storage Temperature -60 C to +150 C
Operating Ambient Temperature
(Note 2) -55 C to +125 C
Maximum Junction Temperture
(Note 2) 150 C
Lead Temperature 300 C(Soldering, 10 seconds)
Thermal Resistance
ThetaJA 354 C/W(Still Air Flow) 77 C/W(500LF/Min Air Flow)
46 C/WThetaJC
Package Weight TBD(Typical)
ESD Rating
(Note 3) 1000V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.
Operating Ratings indicate conditions for which the device is functional, but do not
guaranteed specific performance limits. For guaranteed specifications and test
conditions, see the Electrical Characteristics. The guaranteed specifications apply
only for the test conditions listed. Some performance characteristics may degrade
when the device is not operated under the listed test conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is
dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to
ambient thermal resistance), and TA (ambient temperature). The maxium allowable power
dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given
in the Absolute Maximum Ratings, whichever is lower.
Note 3: Human body model, 1.5K Ohms in series with 100pF.
3
MNLM136A-2.5-X-RH REV 0E0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: (SEE NOTE 3)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Iz = 1mA
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
Iadj Adjust Current Vadj = 0.7V 3 -125 +125 uA 1, 2,
3
Delta Z Delta Zener
Voltage 400 uA < Z < 10mA 3 6 mV 1
3 10 mV 2, 3
Vz Zener Voltage Vadj = Open 3 2.465 2.515 V 1
3 2.44 2.54 V 2, 3
Vadj = 0.7V 3 2.39 2.49 V 1
3 2.29 2.49 V 2, 3
Vadj = 1.9V 3 2.49 2.69 V 1, 2,
3
Zrd Reverse Dynamic
Impedance 1, 3 0.6 Ohm 1
1, 3 1 Ohm 2, 3
Vstab Temp Stability Vz = Adjusted to 2.490V 2, 3 18 mV 2, 3
DC PARAMETERS: DRIFT VALUES, (SEE NOTE 3)
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: "Delta Calculation Performed on QMLV devices at Group B, Subgroup 5 ONLY"
Vz Zener Voltage Vadj = Open 3 -10 10 mV 1
Vadj = 0.7V 3 -10 10 mV 1
Vadj = 1.9V 3 -10 10 mV 1
Note 1: Parameter tested go-no-go only.
Note 2: Tested on Auto Drift Oven.
Note 3: Pre and post irradiation limits are identical to those listed under AC and DC
electrical characteristics. These parts may be dose rate sensitive in a space
environment and may demonstrate enhanced low dose rate effect. Radiation end point
limits for the noted parameters are guaranteed only for the conditions as spectified
in MIL-STD-883, Method 1019.5.
4
MICROCIRCUIT DATA SHEET
MNLM136A-2.5-X-RH REV 0E0
Graphics and Diagrams
GRAPHICS# DESCRIPTION
09988HRB4 METAL CAN, TO-46, 3LD, .100 DIA P.C. (B/I CKT)
H03HRE METAL CAN, TO-46, 3LD, .100 DIA P.C. (P/P DWG)
P000372A METAL CAN, TO-46, 3LD, .100 DIA P.C. (PINOUT)
See attached graphics following this page.
5
N
MICROCIRCUIT DATA SHEET
MNLM136A-2.5-X-RH REV 0E0
Revision History
Rev ECN # Rel Date Originator Changes
0A0 M0003447 03/14/01 Rose Malone Initial MDS Release: MNLM136A-2.5-X-RH, Rev. 0A0.
Replaces MNLM136A-2.5-X, Rev. 0BL.
0B0 M0003791 01/03/02 Rose Malone Update MDS: MNLM136A-2.5-X-RH, Rev. 0A0 to
MNLM136A-2.5-X-RH, Rev. 0B0. Added SMD reference to
Features Section for LM136A-2.5/883.
0C0 M0003955 02/14/02 Rose Malone Update MDS: MNLM136A-2.5-X-RH, Rev. 0B0 to
MNLM136A-2.5-X-RH, Rev. 0C0. Changed Main Table and
Features Section NSID from LM136AH-2.5/883 to
LM136AH-2.5-SMD to match PDS system.
0D0 M0003959 02/13/03 Rose Malone Update MDS: MNLM136A-2.5-X-RH, Rev. 0C0 to
MNLM136A-2.5-X-RH, Rev. 0D0. Added to Main Table and
Features Section LM136AH-2.5/883 reference.
0E0 M0004125 02/13/03 Rose Malone Update MDS: MNLM136A-2.5-X-RH, Rev. 0D0 to
MNLM136A-2.5-RH, Rev. 0E0. Added SMD Number 8418003XA
for LM136AH-2.5/883 to Features Section.
6
