___ POUNT) DESCRIPTION OF REVISIONS | BY [HKD | DATE COUNT] DESCRIPTION OF REVISIONS | BY (HKD | DATE 4 . Aa 4 4 APPLICABLE STANDARD OPERATING STORAGE TEMPERATURE RANGE -10 C TO 6) TEMPERATURE RANGE 10 C TO 60 RATING |; VOLTAGE Ac 100 V, DC 140 V CURRENT LA APPLICABLE CABLE _ S PEC IF ICA TI On sS ITEM | TEST METHOD [ REQUIREMENTS Io TiA T CONSTRUCTION GENERAL EXAMINATION VISUALLY AND BY NEASURING INSTRUMENT, | ACCODING TO DRAWING. Oo LO MARKING CONFIRMED VISUALLY. . 2 LO ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE CONTACT SHALL BE MEASURED AT DC 1 = A. 10 mQ MAX. CLO INSULATION 100 ~V DC 200 MQ MIN. m1O RESISTANCE VOLTAGE PROOF 300 VAC FOR I gin NO FLASHOVER OR BREAKDOWN. oa Loa MECHANICAL CHARACTERISTICS CONTACT INSERTION 0 INSERTION AND WITHDRAWAL FORCES:] | ~ AND WITHDRAWAL FORCES @0. 610 -0. 003 BY STEEL GAUGE. 0.2 N MIN. CONNECTOR INSERTION MEASURED BY APPLICABLE CONNECTOR, INSERTION AND WITHDRAWAL FORCES:] | AND WITHDRAWAL FORCES | WITHOUT LOCKING DEVICE . 30 oN MAX. MECHANICAL OPERATION 1000 TIMES INSERTIONS AND EXTRACTIONS CONTACT RESISTANCE: 15 mS MAX.) | VIBRATION FREQUENCY 10 T0 55 Hz, AMPLITUDE ONO ELECTRICAL DISCONTINUITY OF | [ 0.75 on; m/s AT 2 h 0 ous. FOR 3 DIRECTIONS. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. SHOCK 490 m/s* DURATION OF PULSE 11 rs ONO ELECTRICAL DISCONTINUITY OF | @ | AT 3 TIMES FOR 3 DIRECTIONS. 10 ges. (NO DAMAGE, CRACK AND LOOSENESS OF PARTS. ENVIRONMENTAL CHARACTERISTICS ee DAMP HEAT EXPOSED AT 40 C,90 TO 95 %,96 h. KD INSULATION RESISTANCE: 2 [o - (STEADY STATE) M MIN (AT HIGH HUMIDITY). | (@ INSULATEON RESISTANCE: 20 MS MIN (AT DRY). : NO DAMAGE, CRACK AND LOOSENESS \ OF PARTS. i RAPID CHANGE OF TENPERATURE -30 R/T*?> +85R/T C (DINSULATION RESISTANCE: ro 7 TEMPERATURE TIME 30 10 TO 15 - 30 10 TO 15 nin 200 mQ MAX. UNDER 5 CYCLES. (NO DAMAGE, CRACK AND LOOSENESS - OF PARTS. CORROSION SALT MIST EXPOSED IN 5 % SALT WATER SPRAY FOR 48 hi NO HEAVY CORROSION. tO > DRY HEAT EXPOSED AT + B5 C, 96 h. NO DAMAGE, GRACK AND LOOSENESS @ | QF PARTS. : COLD EXPOSED AT - 30 , 96 h. NO DAMAGE, CRACK AND LOOSENESS [> | OF PARTS. RESISTANCE TO SOLDER TEMPERATURE, +350+10 C FOR NO DEFORMATION OF CASE OF fay SOLDERING HEAT IMMERSION, DURATION, 3~4 s. EXCESSIVE LOOSENESS OF THE TERMINALS. ; SOLDERABILITY SOLDERED AT SOLDER TEMPERATURE, +350+ 10C| NO DEFECT AS PINHOLE, NON-WETTING @ | FOR IMMERSION DURATOIN, 2~3 s. AND DE-WETTING OF SOLDER EXIS Of NOT ON THE SURFACE IMMERSED. _ FOR REFERENCE ONLY Subject to change without notice REMARKS DRAWN DESIGNED \\ CHECKED APPROVED | RELEASED HO te Mt , sale 5 198 NOTE**? ROOM TEMPERATURE. Unless otherwise specified, refer to JIS C 5402, 77, RIS 07.018 77,823 Note QT : Qualification Test AT: Assurance Test : Applicable Test HIROSE ELECTRIC CO.,LTD. | SPECIFICATION SHEET [ PART. NO. S9BRD-4S CODE NO. (OLD) DRAWING NO, CODE NO. | CL ELC4- 007490 cL 110-001 5-3 bn 1 FORM NO, 231-1q a) - oO Panel size 4H _ rane! size - (Panei thickness MAX2) = ~ Note: 4 [41> Recommended tignting torque tor No.631.5 to 2N-m & oo 4 Recommended adhesive to prevent looseness of the ae ae 7 screw for No.1 & No,GZLOCTITE CO.,LTD/Product No. QO oe 7 LOCTITE 274 ~~) 4 Solider cup inside(0,9) 1 I 2 | 3 4 count] DESCRIPTION OF REVISIONS; 9 Y |CHKD DATE lCoUNT) DESCRIPTION OF REVISIONS| BY [cHKD) DATE . . La 5 $1. 8+0.3 wn S = 4H n a B Fill the cacity with orange paint, $1340.3 o m $11.1 0.2 720.1 a +H ress fitting wm l 4 aN TF g LY] . L +} n q N oO x N | - T *) ON A] ow ! 4 c | & wo i 5 * ' ao 3 5 <u 2 . M9xXO.75 ress fitting Synthetic rubber 4. (Black) 3 Potyacetal (White) 7 Beryllium copper Nickel plating 2 | Phosphor bronze! gold plating 6 Steel Nickel plating 4 Zine attoy Nickel plating 5 Steel Nickel plating NO, MATERIAL FINISH , REMARKS NO, MATERIAL FINISH , REMARKS ~] CODE NO. COLD) DRAWN DES]GNED CHECKED APPROVED RELEASED P~ H.YoKoMizp M4: Satoh (pn. cfosh he (Sim 77.8.6 |97-8 18 7-8 -23 ee & <=} | ORawiNG No. PART NO, - SCALE EDC4-007490 KMCSBRD-4S 2 : 1 Hes CODE NO, 4 mm HIROSE ELECTRIC CO.,LTD. CL110-0015-3 4 | 2 3 | 4 FORM No. 226