TTL/CMOS/HCMOS/ACMOS Voltage Controlled Crystal Oscillators CO-401V Features CO-401V SQUARE CORNER CO-441V , 32 kHz to 75 MHz CO-441V PIN NO. | Frequency Range Low Profile 4 Pin DIP. 1 | * TTUHCMOS/ACMOS (MN) t ele 7) fT Compatible : : - t , ois 2 | *3 Point Mount M Cryetal mI i J = tT .20 10 60 oe -all--o18 (MAX) ._ 0 Available with insulated standoffs: increases height to 0.23 maximum Note: dimensions in inches Features oe CO-402V * 32 kHz to 75 MHz. CO-402V BAN NER ow Profile 14 Pi e \ ; 20 1 Feeeeaee) T (MIN) + 30 50 VECTRON 28 INTERNATIONAL ote L of Pola (MAX) ole Note: dimensions in inches CO-464V Features c0-464V CO-467V 8 MHz to 200 MHz CO-467V *-3.3Voperation => _ . * Low Profile. 16 Pin ol INDICATES 3 40" 20M. TTT _ or 16 pin flatpack FRR t 3 : PECL available ea - \ oo scusne conven ore 2002 , 3 Point Mount Stal a PIN Nt 8 PSeesese, MARKING THIS | 30 SURFACE. t 60 - {oS ua MAX: 16 9 oo ont Note: dimensions in inches & Shown) TECHNOLOGIES COMPANYTTL/CMOS/HCMOS/ACMOS Voltage Controlled Crystal Oscillators CO-434vV/454V Ss- Features (8 MHz to 200 MHz) (200 MHz to 640 MHz) CO-434VH/454VH _* Frequencies from 8 MHz to ~640MHz. a a apes 20 MAX * Low Profile 16 Pin and seat 24 Pin Double DIP coed ogee ' ve a oe WARE! CORN EAR 10K, 10.KH, 100K, ECLinPS, 1OK/EL arid 100E/EL Logic AS TR Note: dimensions in inches CO-445V Features 100 kHz to 50 MHz Frequency Range: CO-445V Low. Profile 16 Pin Double DIP * HCMOS Compatible -* Deviation to +500 ppm | Note: dimensions in inches HCMOS TTL/HCMOS/ACMOS ECL Series C0-445V (a) 0-401V 4 Pin Dip (a) CO-434V: 16 pin DDIP (a) CO-454V: 16 pin DDIP 16 pin Double DIP {a} 0-402V 14 Pin Dip (b) CO-434VH: 24 pin DDIP {b) CO-454VH: 24 pin DDIP Very wide deviation {b) CO-441V: 4 Pin Dip (a) CO-437V: 16 pin Flatpack (a) CO-464V: 16 pin DDIP (b} CO-442V: 14 Pin Dip (a) CO-467V: 16 pin flatpack Center Frequency 100 kHz to 50 MHz (a) 32 KHz-75 MHz (a) 8-200 MHz (a) 8-200 MHz (b) 64 kH2z-75 MHz ({b) 200.1-640 MHz (b) 200.1-640 MHz Output Level HCMOS, drives 3 TTL loads (a) TTL 10K, 10KH, MECLII, ECLinPS 100K ECLinPS, 100E or (b) HCMOS/ACMOS OE or 40EL 100 EL Cc y output is standard in CO-434VH and CO-454VH: optional in other models Supply (+ 5%) +5 Vdc, <25 mA +6 Vde at 20-60 mA, ~5.2 Vde -4.5 Vde depending on frequency -3.3 Vde Deviation/ Temperature Deviation Temperature Temperature = Minimum Stability | Code Range Stab. atfo Range | Code Range Stability Deviation ___* Deviation is referenced to the specified output frequency. Alternatives | nog, qa enee cane 0 0/+50C +10 ppm +30 ppm For example, in Model CO-441V-BX at 10 MHz, at 25C fee ie a nr osm om A 0/+50C +20 ppm +50 ppm and OV control the frequency is at least 100 ppm below on ppm =m PP B 0/+50C +35 ppm +100 ppm 10 MHz and at ~5V the frequency is at least 100 pom EAS Os 70C =40 ppm = 250 eM | gee y.5NC 35 ppm 200 ppm above 10 MHz FC6S = sO/+ 70C +60 ppm +500 ppm =9 PP = ED45 =-20/+70C +40 ppm +250 ppm o 0/+ 70C +20 ppm +40 ppm **The following notes apply te options C, F, 1, L, and N FD65 =20/+70C +60 ppm +500 ppm E 0/+ 70C +40 ppm + 100 ppm (= 200 ppm deviation) E55 40/+85C +50 ppm +250 ppm Fer 0/+ 70C +40 ppm +200 ppm They are only available at frequencies up to 25 MHz FE75 = -40/4+85C +70 ppm +500 ppm ~20/+70 60 for HCMOS/ACMOS and 75 MHz for ECL. EF55 55/+85C +50 ppm +250 ppm f 50). +o = opm 100 pm Linearity of + 10% is standard. FF85 = -55/+85C 9 +80 ppm +500 ppm P* -20/+70C +40 ppm +200 ppm (+5% and +2% optional for HCMOS and ACMOS . . dels) Aging rate: 3-5 ppm per year J -40/~85C +40 ppm +60 ppm a -AG7 i Size:08" x1.0"x0.38" 16 pin double DIP | ggveesec 50 ppm +100 ppm Son sOAY and CO-A87V not avaiable on al codes, NOTE: When internal multiplication is used L** -40/+85C =50 ppm 200 ppm ontact tactory Tor avalaotily. (generally above 25 MHz) sub-harmonic ~ suppression is >-30 dBc. M -58/+85C +50 ppm +100 ppm N** -55/+85C +50 ppm +200 ppm Control Voltage Oto +5 Vdc C0-40 and 44 series 0 to +5V: positive transfer function, CO-43 and 45 series: and Linearity | positive transfer (lowest frequency at OV) 0 to -5V negative transfer; CO-46 series: 0 to -3.3V negative transfer +20% linearity smooth monotonic (lowest frequency at OV) characteristic +20% linearity is standard, (+ 10% optionally available (+10% linearity available) standard for C, F. |. L, and N deviation codes). + 5V bipolar control voltage is optional (+3V to + 10V available) With Bipolar, transfer function is negative, standard linearity is + 10% Modulation Rate Oto 1 kHz 1 kHz; high dulati it tional (Higher modulation rates available) de to 2 nigner modulation rates options Modulation Input Z Greater than 50 kQ. Greater than 50 kQ. Aging Rate 3-5 ppm first year, then 2 ppm/year thereafterless than 20 ppm total over 10 years. Vi VECTRON ,, INTERNATIONAL A Dee) TECHNOLOGIES COMPANY