For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
1
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
General Description
Features
Functional Diagram
Low Noise Figure: 2.5 dB
Gain: 13 dB
P1dB Output Power: 13 dBm
Single Supply Voltage: +3.5V @ 70mA
Output IP3: +23 dBm
50 Ohm matched Input/Output
24 Lead 4x4 mm SMT Package: 16mm
Electrical Specications, TA = +25° C, Vdd1 = Vdd2 = +3.5V, Idd = 70 mA
Typical Applications
This HMC962LC4 is ideal for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Military & Space
• Test Instrumentation
The HMC962LC4 is a self-biased GaAs MMIC Low
Noise Amplier housed in a leadless 4x4 mm ceramic
surface mount package. The amplier operates
between 7.5 and 26.5 GHz, providing 13 dB of small
signal gain, 2.5 dB noise gure, and output IP3 of
+23 dBm, while requiring only 70 mA from a +3.5 V
supply. The P1dB output power of +13 dBm enables
the LNA to function as a LO driver for balanced, I/Q
or image reject mixers. The HMC962LC4 also fe-
atures I/Os that are DC blocked and internally mat-
ched to 50 Ohms, making it ideal for high capacity
microwave radios and VSAT applications.
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 7.5 - 10 10 - 24 24 - 26.5 GHz
Gain 10 12 10 13 810 dB
Gain Variation over Temperature 0.027 0.024 0.024 dB / °C
Noise Figure [1] 2.5 3.7 2.5 32.7 3.7 dB
Input Return Loss 13 10 7dB
Output Return Loss 10 12 11 dB
Output Power for 1 dB Compression 10 12 13 dBm
Saturated Output Power (Psat) 14 15 15 dBm
Output Third Order Intercept (IP3) 22 23 25 dBm
Supply Current (Idd)
(Vdd = 3.5V, Vgg1 = Vgg2 = Open) 70 95 70 95 70 95 mA
[1] Board loss subtracted out.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
2
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
Gain vs. Temperature
Output Return Loss vs. Temperature
Broadband Gain & Return Loss
Input Return Loss vs. Temperature
Output IP3 vs. Temperature
-30
-25
-20
-15
-10
-5
0
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
10
15
20
25
30
35
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
IP3 (dBm)
FREQUENCY (GHz)
0
1
2
3
4
5
6
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-20
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
6 8 10 12 14 16 18 20 22 24 26 28
+25C
+85C
-40C
RETURN LOSS (dB)
FREQUENCY (GHz)
6
8
10
12
14
16
18
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
FREQUENCY (GHz)
GAIN (dB)
-25
-15
-5
5
15
25
4 6 8 10 12 14 16 18 20 22 24 26 28 30
S21
S11
S22
RESPONSE (dB)
FREQUENCY (GHz)
Noise Figure vs. Temperature [1]
[1] Board loss subtracted out.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
3
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
Psat vs. Temperature
Power Compression @ 10 GHz
P1dB vs. Temperature
Reverse Isolation vs. Temperature
Power Compression @ 17 GHz
-70
-60
-50
-40
-30
-20
-10
0
6 8 10 12 14 16 18 20 22 24 26 28
+25C
+85C
-40C
ISOLATION (dB)
FREQUENCY (GHz)
9
11
13
15
17
19
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
-4
0
4
8
12
16
20
24
-8 -6 -4 -2 0 2 4 6 8
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
-4
0
4
8
12
16
20
24
-8 -6 -4 -2 0 2 4 6 8
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
-4
0
4
8
12
16
20
24
-8 -6 -4 -2 0 2 4 6 8
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
7
9
11
13
15
17
7 9 11 13 15 17 19 21 23 25 27
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
Power Compression @ 24 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
4
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
70
72
74
76
78
80
82
84
-8 -6 -4 -2 0 2 4 6 8
Idd (mA)
INPUT POWER (dBm)
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Drain Bias Voltage +4V
RF Input Power +10 dBm
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 5.97 mW/°C above 85 °C) 0.39 W
Thermal Resistance
(Channel to ground paddle) 167.6 ° C / W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
Current vs. Input Power @ 17 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC962LC4 Alumina, White Gold over Nickel MSL3 [1] H962
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
5
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 4,
15, 17, 18 GND These pins and package bottom must
be connected to RF/DC ground.
3RFIN This pin AC coupled
and matched to 50 Ohms
5 - 14, 19,
20, 22, 24 N/C No connection necessary. These pins may be connected to
RF/DC ground. Performance will not be affected.
16 RFOUT This pin AC coupled
and matched to 50 Ohms
21, 23 Vdd1, Vdd2 Power supply voltages for the amplier. Bypass capacitors
are required. See application circuit herein.
Application Circuit
Capacitor Value
C1, C2 100 pF
C5, C6 1000 pF
C9, C10 2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
6
HMC962LC4
v02.0614
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 7.5 - 26.5 GHz
Item Description
J1, J2 2.92 mm Connectors
J3 - J8 DC Pin
C1, C2 100 pF Capacitor, 0402 Pkg.
C5, C6 1000 pF Capacitor, 0603 Pkg.
C9, C10 2.2 µF Capacitor, Tantalum
U1 HMC962LC4 Amplier
PCB [2] 108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
List of Material for Evaluation PCB EVAL01-HMC962LC4 [1]
The circuit board used in this application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the pack-
age ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
Evaluation PCB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D