Inductive Proximity Sensors 2mm Sensing Range 2-Wire AC/DC Specifications SENSING RANGE SHIELDED 2mm 2mm 2mm 2mm Yes Yes Yes Yes NMB2-12GM80-US-FE NMB2-12GM80-US-NFE NMB2-12GM85-US-FE-V12 NMB2-12GM85-US-NFE-V12 MODEL NUMBER(S) -- -- -- -- Suffix US Normally open Normally open Normally open Normally open Suffix UO -- -- -- -- 8-200mA 8-200mA 8-200mA 8-200mA 1.3mA 1.3mA 1.3mA 1.3mA 1.7A/20ms 1.7A/20ms 1.7A/20ms 1.7A/20ms VOLTAGE DROP 7V 7V 7V 7V SHORT CIRCUIT AND OVERLOAD PROTECTION Yes Yes Yes Yes REVERSE POLARITY PROTECTION -- -- -- -- 20-250VAC/20-300VDC 20-250VAC/20-300VDC 20-250VAC/20-300VDC 20-250VAC/20-300VDC OUTPUT: Transistor LOAD CURRENT LEAKAGE CURRENT INRUSH CURRENT LED(s) REPEATABILITY HYSTERESIS SWITCHING FREQUENCY ELECTROMAGNETIC COMPATIBILITY COMPLIANCE PROTECTION IEC AC & AC/DC Yes (2) Yes (2) Yes (2) Yes (2) 0.01mm 0.01mm 0.01mm 0.01mm 3-15%(5% typical) 3-15%(5% typical) 3-15%(5% typical) 3-15%(5% typical) 30Hz 15Hz 30Hz 15Hz NEMA ICS5-2000 See page 6 NEMA ICS5-2000 See page 6 NEMA ICS5-2000 See page 6 NEMA ICS5-2000 See page 6 IP67 IP67 IP67 IP67 -14F to +158F -14F to +158F -14F to +158F -14F to +158F HOUSING MATERIAL Stainless steel Stainless steel Stainless steel Stainless steel SENSING FACE Stainless steel Stainless steel Stainless steel Stainless steel General Purpose Yes Yes Yes Yes General Purpose Yes Yes Yes Yes Nonincendive Yes Yes Yes Yes AMBIENT TEMPERATURE APPROVALS LISTED FM ELECTRICAL CONNECTION Dimensions (mm) NMB2-12GM80-US-FE NMB2-12GM80-US-NFE 2-meter cable, PUR heavy jacket, 2-conductor, #22AWG Stainless Steel Metal Short Circuit/Overload Indicators 80 72 61 56 80 72 1/2"-20 64 53 48 M12 x 1 PEPPERL+FUCHS Quick disconnect type V12 See pages 767-812 for cordsets LEDs Green: Power Yellow: Output Status Green/Yellow Flashing Short Circuit/Overload Indicators 17 across the flats 4 thickness Crastin Quick disconnect type V12 NMB2-12GM85-US-FE-V12 NMB2-12GM85-US-NFE-V12 LEDs Green: Power Yellow: Output Status Green/Yellow Flashing 2 2-meter cable, PUR heavy jacket, 2-conductor, #22AWG Inductive SUPPLY VOLTAGE 2-Wire and 4-Wire 2 M12 x 1 17 across the flats 4 thickness Stainless Steel Sensing Face Reduction Factors Target Size 12mm x 12mm x 1mm Model Series FE (Ferrous) Series NFE (Nonferrous) Mild Steel Stainless steel 303/304 316 Aluminum Copper 1 0.25 0.1 0 0 0 0 0 1 1.1 Brass 0 0.9 Specified Sensing Range x Reduction Factor = Actual Sensing Range For 400 series stainless, consult factory. When detecting aluminum foil, Series FE Pile Driver must be used. Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 129