LIMITED WARRANTY & LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs and services are warranted for 90 days. This warranty extends only to the original buyer or enduser customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries or to any product which, in Fluke's opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption. Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country. Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period. To obtain warranty service, contact your nearest Fluke authorized service center or send the product, with a description of the difficulty, postage and insurance prepaid (FOB Destination), to the nearest Fluke authorized service center. Fluke assumes no risk for damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure was caused by misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point). THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY. Fluke Corporation P.O. Box 9090 Everett WA 98206-9090 USA Fluke Industrial B.V. P.O. Box 90 7600 AB Almelo The Netherlands Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision. (R) PM8907 Power Adapter/ Battery Charger Instruction Sheet SPECIFICATIONS z Versions: PM8907/801 Universal European line plug 230V 10%. PM8907/804 United Kingdom line plug 240V 10%. PM8907/806 Japanese line plug 100V 10%. PM8907/807 Australian line plug 240V 10%. PM8907/808 Universal switchable adapter 115V 10% or 230V 15% with plug EN60320-2.2G. PM8907/813 North American line plug 120V 10%. z Line frequency: 50, 60, and 400 Hz 10%. z Output voltage: 15V. z Output current: 300 mA. z Power consumption: 7W maximum. z Output plug: 5-mm power jack per DIN 45232. z Plus (+) voltage connected to outer contact of the 5-mm power jack. z Operating temperature: 0 to +40 C (32 F to 104 F). Sep 1996, Rev.4 8/08 (c) 1996-2008 Fluke Corporation. All rights reserved. Printed in The Netherlands. All product names are trademarks of their respective companies. OPERATION Please read these instructions carefully before using the Power Adapter/Battery Charger. Warning To avoid electrical shock, connect the PM8907 Power Adapter to the AC outlet before connection to the (R) ScopeMeter test tool. z The Power Adapter/Battery Charger (R) operates the ScopeMeter test tool from the local line. z The Power Adapter/Battery Charger charges the internal Battery Pack of the test tool. z Observe the polarity 5-mm power jack; the outer contact is plus (+) polarity. z Do not open the PM8907, it is not serviceable. Figure 1. PM8907/801 Figure 4. PM8907/807 Figure 2. PM8907/804 Figure 5. PM8907/808 Figure 3. PM8907/806 Figure 6. PM8907/813 SYMBOLS International electrical symbols used are explained below. See explanation on Instruction Sheet DOUBLE INSULATION (Protection Class) Conformite Europeenne Do not dispose of this product as unsorted municipal waste. Go to Fluke's website for recycling information. Caution Before you connect the PM8907/808 to the local line, first check the preselected voltage setting on this unit. (see Figure 5.) For connection to the mains outlet, use a power cord that complies with national standards. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fluke: PM8907/808 PM8907/813