F-219 (Rev 26MAY20) FW-20-05-F-D-610-065 FW-12-05-G-D-530-101 (1.27 mm) .050" FW-SM SERIES SMT MICRO BOARD STACKER Low-profile or skyscraper styles Board Mates: CLP, FLE Cable Mates: FFSD SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FW-SM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes APPLICATIONS Variable board spacing FW MATED HEIGHT CLP PROCESSING LEAD STYLE FW MATED CLP HEIGHT* (8.13) FW-XX-03-X-X-233-065 .320 -02 (9.91) FW-XX-03-X-X-303-065 .390 *Processing conditions will affect mated height. Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-30) (0.15 mm) .006" max (31-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) (1.27 mm x 1.27 mm) .050" x .050" micro pitch HIGH-SPEED CHANNEL PERFORMANCE Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com Surface mount RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality NO. PINS PER ROW FW Specify LEAD STYLE from chart FILE NO. E111594 02 thru 50 ALSO AVAILABLE LEAD STYLE (MOQ Required) PLATING OPTION D -F STACKER HEIGHT -"XXX" = Stacker Height (in inches) = Gold flash on post, Matte Tin on tail LEAD STACKER STYLE HEIGHT -03 -05 = 10 " (0.25 m) Gold on post, Matte Tin on tail STACKER + POST (5.46) (8.51) (7.11) (10.16) .215 to .335 .280 to .400 (8.64) (15.49) (10.29) (17.15) to .340 .610 .405 to .675 02 No. of positions x (1.27) .050 = 10 " (0.25 m) Gold on post, Gold flash on tail (1.27) .050 99 (4.76) .188 POST HEIGHT (1.65) .065 MIN (4.27) .168 (0.41) .016 SQ Notes: For added mechanical stability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. Contact ipg@samtec.com for more information. This Series is non-standard, non-returnable. (0.76) .030 (1.91) .075 DIA (3.05) .120 (2.92) .115 -EP (0.89) .035 DIA (0.86) .034 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. -ES = End Shroud (-075 post height only. Mate only with CLP) (5.46 mm) .215" to (15.49 mm) .610" stacker height only 9 pins/row min. -EP = End Shroud with Guide Post (-075 post height only. Mate only with CLP.) (5.46 mm) .215" to (15.49 mm) .610" stacker height only) 9 pins/row min. = Alignment Pin (3 positions min.) (5.46 mm) .215" to (15.75 mm) .620" stacker height only -P -P -A OPTION -A (4.06) .160 -ES STACKER HEIGHT (2.51) .099 (3.45) .136 x (5.08) .200 100 (1.19) .047 01 (1.65 mm) .065" minimum Example: -065 = (1.65 mm) .065" -G (3.42) .135 (1.27) .050 -"XXX" = Post Height (in inches) Example: -250 = (6.35 mm) .250" -L * Smaller stack heights POST HEIGHT 4 G b p s = Pick & Place Pad (5 positions min.) -TR = Tape & Reel (Max overall height = Post+Stacker Height+ Pad+Alignment Pin = .700 (17.78))