MOSFET - Power, Single, N-Channel, Logic Level, SO-8FL 30 V, 0.67 mW, 370 A NTMFS4C020N www.onsemi.com Features * * * * * Small Footprint (5x6 mm) for Compact Design Low RDS(on) to Minimize Conduction Losses Low QG and Capacitance to Minimize Driver Losses Optimized for 4.5 Gate Drive These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant V(BR)DSS RDS(ON) MAX 0.67 mW @ 10 V 30 V Symbol 0.95 mW @ 4.5 V D (5) Value Unit Drain-to-Source Voltage VDSS 30 V Gate-to-Source Voltage VGS "20 V TC = 25C ID 370 A TC = 25C PD 161 W TA = 25C ID 57 A TA = 25C PD 3.84 W Continuous Drain Current RqJC (Notes 1, 3) Power Dissipation RqJC (Notes 1, 3) Continuous Drain Current RqJA (Notes 1, 2, 3) Power Dissipation RqJA (Notes 1, 2, 3) Steady State Steady State Pulsed Drain Current G (4) S (1,2,3) N-CHANNEL MOSFET MARKING DIAGRAM D IDM 900 A TJ, Tstg -55 to 150 C IS 110 A Single Pulse Drain-to-Source Avalanche Energy (IL(pk) = 35 A) EAS 862 mJ Lead Temperature for Soldering Purposes (1/8 from case for 10 s) TL 260 C TA = 25C, tp = 10 ms Operating Junction and Storage Temperature Source Current (Body Diode) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Symbol Value Unit Junction-to-Case - Steady State RqJC 0.93 C/W Junction-to-Ambient - Steady State (Note 2) RqJA 39 Parameter 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 3. Maximum current for pulses as long as 1 second is higher but is dependent on pulse duration and duty cycle. (c) Semiconductor Components Industries, LLC, 2016 S S S G 1 SO-8 FLAT LEAD CASE 488AA STYLE 1 A Y W ZZ 1 D 4C020N AYWZZ D D = Assembly Location = Year = Work Week = Lot Traceability ORDERING INFORMATION Package Shipping NTMFS4C020NT1G SO-8 FL (Pb-Free) 1500 / Tape & Reel NTMFS4C020NT3G SO-8 FL (Pb-Free) 5000 / Tape & Reel Device THERMAL RESISTANCE MAXIMUM RATINGS (Note 1) November, 2019 - Rev. 4 370 A 0.78 mW @ 6.5 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter ID MAX For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NTMFS4C020N/D NTMFS4C020N ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise specified) Parameter Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current Gate-to-Source Leakage Current IDSS V 16.3 VGS = 0 V, VDS = 24 V mV/C TJ = 25 C 1 TJ = 125C 100 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 4) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain-to-Source On Resistance VGS(TH)/TJ RDS(on) 1.3 2.2 5.8 V mV/C VGS = 10 V ID = 30 A 0.56 0.67 VGS = 6.5 V ID = 30 A 0.56 0.78 VGS = 4.5 V ID = 30 A 0.76 0.95 Forward Transconductance gFS VDS = 3 V, ID = 30 A 183 Gate Resistance RG TA = 25 C 1.0 2.5 10144 15250 5073 7610 mW S W CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 148 350 Total Gate Charge QG(TOT) 63 105 Threshold Gate Charge QG(TH) 18 36 Gate-to-Source Charge QGS 29 58 Gate-to-Drain Charge QGD 13 26 139 230 Total Gate Charge VGS = 0 V, f = 1 MHz, VDS = 15 V VGS = 4.5 V, VDS = 15 V; ID = 30 A QG(TOT) VGS = 10 V, VDS = 15 V, ID = 30 A pF nC nC SWITCHING CHARACTERISTICS (Note 5) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(ON) 29 tr td(OFF) VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 68 ns 53 36 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25C 0.73 TJ = 125C 0.55 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 10 A 1.1 V 87 VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A QRR 43 ns 44 147 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 5. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 2 NTMFS4C020N TYPICAL CHARACTERISTICS 3.4 V 3.6 V 3.2 V 300 4.5 V 250 200 3.0 V 150 2.8 V 100 50 RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) 0 0.5 1.0 1.5 2.0 2.5 200 TJ = 25C 150 100 0 3.0 TJ = 150C TJ = -55C 1.5 TJ = 25C 1.2 1.1 1.0 0.9 0.8 0.7 0.6 4 5 6 7 8 9 10 VGS, GATE VOLTAGE (V) 3.5 4 1.5 TJ = 25C 1.4 1.3 1.2 1.1 1.0 0.9 VGS = 4.5 V 0.8 0.7 VGS = 10 V 0.6 0.5 0 50 100 150 200 250 300 350 400 ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate-to-Source Voltage Figure 4. On-Resistance vs. Drain Current and Gate Voltage 100000 VGS = 10 V ID = 30 A IDSS, LEAKAGE (nA) RDS(on), NORMALIZED DRAIN-TO- SOURCE RESISTANCE (W) 3 Figure 2. Transfer Characteristics 1.3 1.6 2.5 Figure 1. On-Region Characteristics 1.4 1.8 2 VGS, GATE-TO-SOURCE VOLTAGE (V) ID = 30 A 3 250 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 1.5 0.5 300 50 VGS = 2.6 V 0.0 VDS = 3 V 350 RDS(on), DRAIN-TO-SOURCE RESISTANCE (mW) ID, DRAIN CURRENT (A) 350 400 10 V ID, DRAIN CURRENT (A) 400 1.4 1.2 1.0 10000 TJ = 125C TJ = 100C 1000 TJ = 85C 100 0.8 0.6 -50 -25 0 25 50 75 100 125 150 175 10 0 5 10 15 20 25 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage www.onsemi.com 3 30 NTMFS4C020N TYPICAL CHARACTERISTICS CISS 10k COSS 1k VGS = 0 V TJ = 25C f = 1 MHz 100 10 0.1 CRSS 10 1 100 12 11 VDS VGS 8 12 7 6 9 5 4 QGD QGS VDS = 15 V ID = 30 A TJ = 25C 3 2 1 0 0 20 40 60 80 100 6 3 0 140 120 VDS, DRAIN-TO-SOURCE VOLTAGE (V) QG, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source and Drain-to-Source Voltage vs. Total Charge 1000 tr IS, SOURCE CURRENT (A) td(off) VGS = 4.5 V VDD = 15 V ID = 15 A tf td(on) 100 0.1 1 10 100 10 1 0.1 100 TJ = 150C 0.3 0.5 0.4 TJ = 25C 0.6 0.7 TJ = -55C 0.8 0.9 1.0 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 10 ms ID, DRAIN CURRENT (A) t, TIME (ns) 15 10 9 1000 10 18 QT VDS, DRAIN-TO-SOURCE VOLTAGE (V) VGS, GATE-TO-SOURCE VOLTAGE (V) C, CAPACITANCE (pF) 100k 100 100 ms VGS 10 V TC = 25C 10 RDS(on) Limit Thermal Limit Package Limit 1 0.1 1 1 ms 10 ms 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area www.onsemi.com 4 100 NTMFS4C020N TYPICAL CHARACTERISTICS 100 RqJA = Steady State = 39C/W Duty Cycle = 0.5 0.2 0.1 0.05 1 0.02 0.01 R(t) (C/W) 10 PCB Cu Area = 650 mm2 PCB Cu Thk = 2 oz 0.1 0.01 Single Pulse 0.000001 0.00001 0.0001 0.001 0.1 0.01 1 t, TIME (s) Figure 12. Thermal Impedance (Junction-to-Ambient) 1000 100 IPEAK, (A) 0.001 TJ(initial) = 25C 10 TJ(initial) = 100C 1 1.00E-04 1.00E-03 TIME IN AVALANCHE (s) Figure 13. Avalanche Characteristics www.onsemi.com 5 1.00E-02 10 100 1000 NTMFS4C020N PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO-8FL) CASE 488AA ISSUE N 2X 0.20 C D 2 A B D1 2X 0.20 C 2 2 3 DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q 4X E1 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. q E c A1 4 TOP VIEW C SEATING PLANE DETAIL A 0.10 C A 0.10 C SIDE VIEW RECOMMENDED SOLDERING FOOTPRINT* DETAIL A 2X 0.495 0.10 b C A B 0.05 c 4.560 2X 8X e 1 2X 0.475 4 3.200 K PIN 5 (EXPOSED PAD) G STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 1.530 e/2 L MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 --- 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.30 5.15 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.15 6.30 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ --- 12 _ E2 L1 4.530 M 1.330 2X 0.905 1 0.965 D2 4X 1.000 4X 0.750 BOTTOM VIEW 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 6 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative