LH0003 Wide Bandwidth Operational Amplifier Y General Description Y The LH0003/LH0003C is a general purpose operational amplifier which features: slewing rate up to 70 V/ms, a gain bandwidth of up to 30 MHz, and high output currents. Other features are: Features Y Y Very low offset voltage Large output swing High CMRR Good large signal frequency response Typically l 90 dB 50 kHz to 400 kHz depending on compensation The LH0003 is specified for operation over the b55 C to a 125 C military temperature range. The LH0003C is specified for operation over the 0 C to a 85 C temperature range. Typically 0.4 mV l g 10V into 100X load Schematic and Connection Diagrams TL/K/10123 - 2 Top View Order Number LH0003H, LH0003H-MIL or LH0003CH See NS Package Number H10G TL/K/10123 - 1 C1995 National Semiconductor Corporation TL/K/10123 RRD-B30M115/Printed in U. S. A. LH0003 Wide Bandwidth Operational Amplifier August 1992 Absolute Maximum Ratings Input Voltage If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 120 mA Operating Temperature Range LH0003 b55 C to a 125 C LH0003C 0 C to a 85 C g 20V Power Dissipation Differential Input Voltage Equal to supply Load Current See curve g 7V Storage Temperature Range Lead Temperature (Soldering, 10 sec.) b 65 C to a 150 C 300 C Electrical Characteristics (Notes 1 & 2) Parameter Input Offset Voltage Conditions Min RS k 100X Input Offset Current Input Bias Current Typ Max Units 0.4 3.0 mV 0.02 0.2 mA 0.4 2.0 mA 1.2 3 mA Supply Current VS e g 20V Voltage Gain RL e 100k, VS e g 15V, VOUT e g 10V 20 70 V/mV Voltage Gain RL e 2k, VS e g 15V, VOUT e g 10V 15 40 V/mV Output Voltage Swing VS e g 15, RL e 100X g 10 g 12 V 100 kX 4 mV/ C 8 nA/ C Input Resistance Average Temperature Coefficient of Offset Voltage RS k 100X Average Temperature Coefficient of Bias Current CMRR RS k 100X, VS e g 15V, VIN e g 10V 70 90 dB PSRR RS k 100X, VS e g 15V, DV e 5V to 20V 70 90 dB Equivalent Input Noise Voltage RS e 100X, f e 10 kHz to 100 kHz VS e g 15V 1.8 mVrms Note 1: These specifications apply for Pin 7 grounded, for g 5V k VS k g 20V, with capacitor C1 e 90 pF from pin 1 to pin 10 and C2 e 90 pF from pin 5 to ground, over the specified operating temperature range, unless otherwise specified. Note 2: Typical values are for tAMBIENT e 25 C unless otherwise specified. Note 3: See YRETS0003X for the LM0003H military specifications. Typical Performance Characteristics Maximum Power Dissipation Large Signal Frequency Response Open Loop Frequency Response TL/K/10123 - 5 2 Typical Applications High Slew Rate Unity Gain Inverting Amplifier *Previously called NH0003/NH0003C TL/K/10123 - 2 Typical Compensation Circuit Gain C1 pF C2 pF Slew Rate RL l 200X, V/ms t 40 0 5 15 50 90 0 30 30 50 90 70 30 15 5 2 t 10 t5 t2 t1 Full Output Frequency RL e 200X VOUT e g 10V 400 350 250 100 50 * kHz Unity Gain Follower TL/K/10123 - 4 3 LH0003 Wide Bandwidth Operational Amplifier Physical Dimensions inches (millimeters) Lit. Y 106240 10 Lead .230 Dia P.C. Metal Can Package (H) Order Number LH0003H, LH0003H-MIL or LH0003CH NS Package Number H10G LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.