Anaren, Inc. / 6635 Kirkville Road / Eas t Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / air@anaren.com
PRELIMINARY
The A1101R08A-EZ4x is a target board assembly
showcasing the Anaren A1101R08A radio module
in the industry’s smallest package (9 x 16 x
2.5mm) mounted on it.
This module is fully compliant with Texas Instru-
ments eZ430-RF2500 Development Kit, and plugs
directly into either the battery board or USB de-
bugging interface via the 6 pin header. It is de-
signed to be a direct-replacement for the access
point and end point target board modules included
with the Texas Instrument eZ430-RF2500 Devel-
opment Kit. Each Anaren A1101R08A Radio Mod-
ule is ETSI compliant, and incorporates the Texas
Instruments CC1101 transceiver chip.
As a stand-alone module for your final design im-
plementation Anaren’s A1101R08A has an LGA
pad footprint with an integral printed antenna, this
module is designed to effortlessly integrate into a
A1101R08A-EZ4x
The A1101R08A-EZ4x is a high-performance demonstration platform, designed to
showcase Anaren's family of ETSI compliant Radio Modules. It features an
A1101R08A AIR 868 MHz Radio Module w ith integral antenna, and is designed to
quickly connect to the Texas Instruments eZ430 Development Kit batter y board or
USB debugging interface
EZ4x Module Series
Product Overview
Layout
wide range of applications, including: industrial
control, building automation, low-power wireless
sensor networks, lighting control, and automated
meter reading.
Anaren, Inc. / 6635 Kirkville Road / Eas t Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / air@anaren.com
PRELIMINARY
Pin Diagram Nomenclature
A (Anaren)
1 Chip series (1101, 2500)
2 Function (R = radio only)
3 Frequency band (x100MHz)
4 Form factor (A = Internal Antenna, C = Connector)
5 Module Type (EM1 = Eval Module, EZ4 = EZ-430
Module)
6 Firmware (EZ4 only) (A = Access Point, E = End Point,
X = Custom (or no firmware)
1040a
Caution! ESD sensitive device. Precautions
should be used when ha ndling the device in
order to prevent permanent damage.
This product shall not be used in any of the following products or systems
without prior express written permission from Anaren Microwave, Inc:
(i) implantable cardiac rhythm management syst ems, including without
limitation pacemakers, defibrillators and cardiac resynchronization devices;
(ii) external cardiac rhythm management systems that communicate
directly with one or more implantable medical devices; or
(iii) other devices used to monitor or treat cardiac function, including without
limitation pressure sensors, biochemical sensors and neurostimulators.
PLEASE NOTE: Additional information on the Texas Instruments
CC1101 Development Kit can be found in the company’s latest datasheet
release at http://www.ti.com
Battery / USB:
ST1 P3.4 / UCA0TXD / UCA0SIMO
ST2 GND
ST3 RST / SBWTDIO
ST4 TEST / SBWTCK
ST5 VCC (3.6V)
ST6 P3.5 / UCA0RXD / UCA0SOMI
Interface:
P1 GND
P2 VCC
P3 P2.0 / ACLK / A0 / OA0I0
P4 P2.1 / TAINCLK / SMCLK / A1 /A0O
P5 P2.2 / TA0 / A2 / OA0I1
P6 P2.3 / TA1 / A3 / VREF– / VeREF–/ OA1I1 / OA1O
P7 P2.4 / TA2 / A4 / VREF+ / VeREF+/ OA1I0
P8 P4.3 / TB0 / A12 / OA0O
P9 P4.4 / TB1 / A13 / OA1O
P10 P4.5 / TB2 / A14 / OA0I3
P11 P4.6 / TBOUTH / A15 / OA1I3
P12 GND
P13 P2.6 / XIN (GDO0)
P14 P2.7 / XOUT (GDO2)
P15 P3.2 / UCB0SOMI / UCB0SCL
P16 P3.3 / UCB0CLK / UCA0STE
P17 P3.0 / UCB0STE / UCA0CLK / A5
P18 P3.1 / UCB0SIMO / UCB0SDA
EZ4x Connections
To view the entire available family of AIR Modules &
Development options, please visit our website at:
http://www.anaren.com/content/File/AIR/AIRoverview.cfm
