DRAW N
APPROVED
CHECKED
DATE
18/12/2014
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED
H.SMITH 07/07/2015
SH T
1
D RA W ING N O:
TXR18
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
18/12/2014
K.SHEPPARD 19/12/2014
TE CAGE CODE: 06090
POLA MCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
TINE L-LOCK BACK SH ELL
TE CO N N E C TIVIT Y - P O LAM C O LT D R ES E R VE S T HE R IG H T TO AM E N D TH IS D RAW IN G
AN D TH E IN F O R M AT IO N S E T F OR T H H E R E O N A T ANY TIM E . US ER S S HO ULD
IN D E PE N D EN T LY E V A L UAT E T H E S U ITA B ILITY OF TH E P RO D U CT FO R T HE IR A P P LICA TION .
D RA W IN G RE V:
K
MIL-DTL-5015D
REVISIONS
LTR
REVISED PER ECO-15-002435
DESCRIPTION DATE APPROVED
J
KREV ISED P ER E C O-15 -0 09990
18/02/2015 H.SMITH
H.SMITH
07/07/2015
SERIES
TXR: RING INCLUDED
(SEE RING OPTION)
TX: RING NOT INCLUDED
CONNECTOR INTERFACE
MATERIAL
REFER TO CH00-0250-008
FINISH
REFER TO CH00-0250-008
ANGLE
MANUFACTURER CODE
SEE TABLE 3
DASH NUMBER (TABLE 1)
ENTRY SIZE (TABLE 2)
RING OPTION
AI - TO SUIT SINGLE BRAID
BI - TO SUIT DOUBLE BRAID
FOR TX, LEAVE BLANK
MODIFICATION CODE
REFER TO CH00-0250-008
TXR18AB00 -1608AI-
2
CODE 18 - TINEL-LOCK BACKSHELL
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND
A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS,
SEE CH00-0250-008.
3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED
TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC
PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED.
4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR18AB00-1406).
RING SHALL BEAR NO MARKING.
5. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED.
6. BACKSHELL MATES TO MIL-DTL-5015D, CLASS A, E & R, MS3100, MS3101 & MS3106.
RESILIENT INSERT, SOLDER TYPE & BENDIX 10-214, CANNON CA-RX COMMERCIAL CRIMP TYPE.
7. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MANUFACTURER IS UNKNOWN ("D" IN TABLE 1).
8. ALL THREADS SIZES FOR ORDER NO. APPLY
9. ANTI-ROTATIONAL SET SCREW, THREE THREADED HOLES 120° ± 5° APART, SINGLE
MATING SET SCREW SUPPLIED: AN565DC4H2, NOT REQUIRED FOR TYPE 2 ADAPTERS.
TINEL LOCK RING 3
9 ANTI-ROTATIONAL SET SCREW
If this document is printed it becomes uncontrolled. Check for the latest revision
DRAW N
APPROVED
CHECKED
DATE
18/12/2014
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED
H.SMITH 07/07/2015
SH T
2
D RA W ING N O:
TXR18
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
18/12/2014
K.SHEPPARD 19/12/2014
TE CAGE CODE: 06090
POLA MCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
TINE L-LOCK BACK SH ELL
TE CO N N E C TIVIT Y - P O LAM C O LT D R ES E R VE S T HE R IG H T TO AM E N D TH IS D RAW IN G
AN D TH E IN F O R M AT IO N S E T F OR T H H E R E O N A T ANY TIM E . US ER S S HO ULD
IN D E PE N D EN T LY E V A L UAT E T H E S U ITA B ILITY OF TH E P RO D U CT FO R T HE IR A P P LICA TION .
D RA W IN G RE V:
K
MIL-DTL-5015D
REVISIONS
LTR
REVISED PER ECO-15-002435
DESCRIPTION DATE APPROVED
J
KREV ISED P ER E C O-15 -0 09990
18/02/2015 H.SMITH
H.SMITH
07/07/2015
XXXX
XXXX
19,50
`
0,50 26,50
ØK
19,50
`
0,50
G
F
D
J
H
M
19,50
`
0,50
E
STRAIGHT BACKSHELL - TYPE 1 STRAIGHT BACKSHELL - TYPE 2
45° BACKSHELL - TYPE 1 45° BACKSHELL - TYPE 2
90° BACKSHELL - TYPE 2
90° BACKSHELL - TYPE 1
W
T
E
J
H
19,50
`
0,50 M
90° BACKSHELL - TYPE 2
STAINLESS STEEL AND
NICKEL ALUMINIUM BRONZE
90° BACKSHELL - TYPE 1
STAINLESS STEEL AND
NICKEL ALUMINIUM BRONZE
PART MARK
HERE
A THREAD
ØB
IF MAX ENTRY IS EXCEEDED BACKSHELL
WILL BE SUPPLIED AS TYPE 2
T
W
C
A THREAD
ØB
PART MARK
HERE
27,00
SILICONE
O-RING
ØS
ØY
5
ØZ
If this document is printed it becomes uncontrolled. Check for the latest revision
DRAW N
APPROVED
CHECKED
DATE
18/12/2014
3RD ANGLE
PROJECTION
NOT TO
SCALE
APPROVED
H.SMITH 07/07/2015
SH T
3
D RA W ING N O:
TXR18
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
ANGULAR +/- 1°
K.WINCZURA
18/12/2014
K.SHEPPARD 19/12/2014
TE CAGE CODE: 06090
POLA MCO/TE CAGE CODE: U5792
ASSY USED ON:
TITLE:
TINE L-LOCK BACK SH ELL
TE CO N N E C TIVIT Y - P O LAM C O LT D R ES E R VE S T HE R IG H T TO AM E N D TH IS D RAW IN G
AN D TH E IN F O R M AT IO N S E T F OR T H H E R E O N A T ANY TIM E . US ER S S HO ULD
IN D E PE N D EN T LY E V A L UAT E T H E S U ITA B ILITY OF TH E P RO D U CT FO R T HE IR A P P LICA TION .
D RA W IN G RE V:
K
MIL-DTL-5015D
REVISIONS
LTR
REVISED PER ECO-15-002435
DESCRIPTION DATE APPROVED
J
KREV ISED P ER E C O-15 -0 09990
18/02/2015 H.SMITH
H.SMITH
07/07/2015
ORDER
NUMBER
08
10
11
12
14
16
18
20
22
24
28
32
36
40
44
48
THESE DIMENSIONS APPLY IF
BACKSHELL IS STAINLESS STEEL
OR NICKEL ALUMINIUM BRONZE
THESE DIMENSIONS APPLY IF
BACKSHELL IS STAINLESS STEEL
OR NICKEL ALUMINIUM BRONZE
ENTRY
SIZE
ØZ
MIN ØS ØY
±0,3
ØK
MAX
F
±0,5
G
±0,5
H
±0,5
M
±0,5
J
±0,5
H
±0,5
M
±0,5
J
±0,5
04 6,35 9,49 +/-0,04 14,00 NA NA NA NA NA NA NA NA NA
05 7,92 11,06 +/-0,04 15,50 21,0 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2
06 9,53 12,66 +/-0,04 17,10 21,0 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2
07 11,10 14,21 +/-0,07 18,70 21,0 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2
08 12,70 15,81 +/-0,07 20,30 24,5 13,1 28,0 27,0 17,0 29,45 28,3 19,4 29,7
10 15,88 18,96 +/-0,08 23,50 29,0 13,5 29,0 31,0 19,5 31,00 31,1 21,0 31,2
12 19,05 22,14 +/-0,08 26,70 32,5 14,5 29,7 34,0 21,0 32,70 34,2 22,8 32,9
14 22,23 25,30 +/-0,08 29,80 35,5 15,5 30,5 35,0 20,0 34,25 38,5 25,3 34,5
16 25,40 28,48 +/-0,08 33,00 37,0 16,1 30,9 38,0 21,5 35,80 40,7 26,1 36,1
18 28,58 31,65 +/-0,08 36,20 40,0 16,5 31,1 42,0 24,0 37,40 43,7 27,6 37,6
20 31,75 34,83 +/-0,08 39,40 43,5 17,0 32,1 45,0 25,5 38,90 46,4 29,1 39,1
22 34,93 37,98 +/-0,08 42,50 48,5 18,5 35,3 54,5 31,0 42,00 50,0 31,0 42,0
24 38,10 41,15 +/-0,08 45,70 52,1 21,9 38,1 58,0 33,0 46,00 53,5 33,0 46,0
MFR
CODE
CONNECTOR MANUFACTURER
(MS 3100, MS 3101 & MS 3106)
A AMPHENOL - CLASS A
BBENDIX - CLASS A, E & R
CCANNON - CLASS A, E & R
DMFR UNKNOWN, CLASS A, E & R
R AMPHENOL - CLASS R
-MFR CODE NOT REQUIRED
TABLE 1
TABLE 2
TABLE 3
SHELL
SIZE
MFR
CODE
TABLE 3
MAX
ENTRY
A
THREAD
ØB
MAX
C
±0,5
D
±0,5
W
±0,5
T
±0,5
E
±0,5
W
±0,5
T
±0,5
E
±0,5
8S B 04 3/8-32 UNEF 18,5 15,0 20,1 21,7 15,2 26,0 21,7 15,2 29,0
8S C 04 7/16-28 UNEF 18,1 15,0 20,1 21,7 15,2 26,0 21,7 15,2 29,0
8S A, R 04 7/16-27 UNS 18,5 15,0 20,1 21,7 15,2 26,0 21,7 15,2 29,0
8S D 8 04 7 18,5 15,0 20,1 21,7 15,2 26,0 21,7 15,2 29,0
10S -06 1/2-28 UNEF 19,8 15,4 21,6 23,2 15,7 27,7 23,2 15,7 31,2
10SL C 07 9/16-24 UNEF 21,6 18,4 21,6 25,0 16,5 27,7 27,2 17,5 33,0
10SL A, B, R 07 5/8-24 UNEF 23,2 18,4 21,6 27,2 17,5 27,7 27,2 17,5 33,0
10SL D 8 07 7 23,2 18,4 21,6 27,2 17,5 27,7 27,2 17,5 33,0
12 & 12S B, C 08 5/8-24 UNEF 23,0 18,4 21,6 27,2 17,5 27,7 27,2 17,5 33,0
12 & 12S A, R 08 11/16-24 UNEF 24,9 18,4 21,6 27,2 17,5 27,7 27,2 17,5 33,0
12 & 12S D 8 08 7 24,9 18,4 21,6 27,2 17,5 27,7 27,2 17,5 33,0
14 & 14S -10 3/4-20UNEF 27,7 19,3 22,2 30,7 19,5 30,7 30,7 19,5 34,9
16 & 16S -12 7/8-20 UNEF 31,1 20,0 23,6 34,2 21,5 32,4 34,2 21,5 35,5
18 -12 1-20 UNEF 34,4 20,6 23,7 37,2 23,0 34,0 37,2 23,0 37,2
20 A, B, C 16 1 1/8-18 UNEF 37,6 21,3 24,6 40,7 24,5 35,6 40,7 24,5 38,7
20 R 16 1 1/8-24 UNS 37,6 21,3 24,6 40,7 24,5 35,6 40,7 24,5 38,7
20 D 8 16 7 37,6 21,3 24,6 40,7 24,5 35,6 40,7 24,5 38,7
22 -18 1 1/4-18 UNEF 40,6 21,9 25,0 43,7 26,0 37,1 43,7 26,0 40,2
24 -20 1 3/8-18 UNEF 43,6 22,5 25,4 46,7 27,5 38,6 46,7 27,5 44,9
28 -22 1 5/8-18 UNEF 48,6 23,6 25,4 51,7 30,0 41,1 51,7 30,0 46,0
32 B, C 24 1 7/8-16 UN 54,9 24,9 27,5 58,4 32,7 44,5 58,4 32,2 51,3
32 A, R 24 1 29/32-18 UN 54,9 24,9 27,5 58,4 32,7 44,5 58,4 32,2 51,3
32 D 8 24 754,9 24,9 27,5 58,4 32,7 44,5 58,4 32,2 51,3
36 B 24 2 1/16-16 UNS 64,6 27,5 29,0 67,7 38,0 49,1 67,7 38,0 54,3
36 R 24 2 1/16-20 UNS 64,6 27,5 29,0 67,7 38,0 49,1 67,7 38,0 54,3
36 C 24 2 1/8-16 UN 64,6 27,5 29,0 67,7 38,0 49,1 67,7 38,0 54,3
36 A 24 2 1/8-18 UNS 64,6 27,5 29,0 67,7 38,0 49,1 67,7 38,0 54,3
36 D 8 24 7 64,6 27,5 29,0 67,7 38,0 49,1 67,7 38,0 54,3
40 B 24 2 5/16-16 UN 70,6 30,1 30,1 72,2 41,1 51,3 72,2 41,1 57,5
40 A, C, R 24 2 3/8-16UN 70,6 30,1 30,1 72,2 41,1 51,3 72,2 41,1 57,5
40 D 8 24 769,3 30,1 30,1 72,2 41,1 51,3 72,2 41,1 57,5
44 -24 2 5/8-16 UN 82,0 30,1 30,1 77,6 MAX 41,1 51,3 72,2 41,1 57,5
48 C 24 2 13/16-18 UNS 82,0 31,3 38,5 84,0 MAX 44,1 57,5 75,5 40,8 57,5
48 A, R 24 2 7/8-16 UN 82,0 31,3 38,5 84,0 MAX 47,2 57,5 75,5 40,8 57,5
48 D 8 24 782,0 31,3 38,5 84,0 MAX 47,2 57,5 75,5 40,8 57,5
ØB
A THREAD
28,40 MAX
7
If this document is printed it becomes uncontrolled. Check for the latest revision
