Quick Assembly Two and Three Channel Optical Encoders Technical Data Features * Two Channel Quadrature Output with Optional Index Pulse * Quick and Easy Assembly * No Signal Adjustment Required * External Mounting Ears Available * Low Cost * Resolutions Up to 1024 Counts Per Revolution * Small Size * -40C to 100 C Operating Temperature * TTL Compatible * Single 5 V Supply Description The HEDS-5500/5540, HEDS5600/5640, and HEDM-5500/ 5600 are high performance, low cost, two and three channel optical incremental encoders. These encoders emphasize high reliability, high resolution, and easy assembly. Each encoder contains a lensed LED source, an integrated circuit with detectors and output circuitry, and a codewheel which rotates between the emitter and detector IC. The outputs of the HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x HEDS-5500/5600 and HEDM5500/ 5600 are two square waves in quadrature. The HEDS-5540 and 5640 also have a third channel index output in addition to the two channel quadrature. This index output is a 90 electrical degree, high true index pulse which is generated once for each full rotation of the codewheel. The HEDS series utilizes metal codewheels, while the HEDM series utilizes a film codewheel allowing for resolutions to 1024 CPR. The HEDM series is nont available with a third channel index. These encoders may be quickly and easily mounted to a motor. For larger diameter motors, the HEDM-5600, and HEDS-5600/ 5640 feature external mounting ears. The quadrature signals and the index pulse are accessed through five 0.025 inch square pins located on 0.1 inch centers. Applications The HEDS-5500, 5540, 5600, 5640, and the HEDM-5500, 5600 provide motion detection at a low cost, making them ideal for high volume applications. Typical applications include printers, plotters, tape drives, positioning tables, and automatic handlers. Note: Agilent Technologies encoders are not recommended for use in safety critical applications. Eg. ABS braking systems, power steering, life support systems and critical care medical equipment. Please contact sales representative if more clarification is needed. Standard resolutions between 96 and 1024 counts per revolution are presently available. Consult local Agilent sales representatives for other resolutions. ESD WARNING: NORMAL HANDLING PRECAUTIONS SHOULD BE TAKEN TO AVOID STATIC DISCHARGE. 2 Package Dimensions HEDS-5500/5540, HEDM-5500 *Note: For the HEDS-5500 and HEDM-5500, Pin #2 is a No Connect. For the HEDS-5540, Pin #2 is CH. I, the index output. HEDS-5600/5640, HEDM-5600 *Note: For the HEDS-5600 and HEDM-5600, Pin #2 is a No Connect. For the HEDS-5640, Pin #2 is CH. I, the index output. 3 Theory of Operation Block Diagram The HEDS-5500, 5540, 5600, 5640, and HEDM-5500, 5600 translate the rotary motion of a shaft into either a two- or a threechannel digital output. As seen in the block diagram, these encoders contain a single Light Emitting Diode (LED) as its light source. The light is collimated into a parallel beam by means of a single polycarbonate lens located directly over the LED. Opposite the emitter is the integrated detector circuit. This IC consists of multiple sets of photodetectors and the signal processing circuitry necessary to produce the digital waveforms. The codewheel rotates between the emitter and detector, causing the light beam to be interrupted by the pattern of spaces and bars on the codewheel. The photodiodes which detect these interruptions are arranged in a pattern that corresponds to the radius and design of the codewheel. These detectors are also spaced such that a light period on one pair of detectors corresponds to a dark period on the adjacent pair of detectors. The photodiode outputs are then fed through the signal processing circuitry resulting in A, A, B and B (also I and I in the HEDS-5540 and 5640). Comparators receive these signals and produce the final outputs for channels A and B. Due to this integrated phasing technique, the digital output of channel A is in quadrature with that of channel B (90 degrees out of phase). In the HEDS-5540 and 5640, the output of the comparator for I and I is sent to the index processing circuitry along with the outputs of channels A and B. The final output of channel I is an index pulse PO which is generated once for each full rotation of the codewheel. This output PO is a one state width (nominally 90 electrical degrees), high true index pulse which is coincident with the low states of channels A and B. Definitions Count (N): The number of bar and window pairs or counts per revolution (CPR) of the codewheel. One Cycle (C): 360 electrical degrees (e), 1 bar and window pair. One Shaft Rotation: 360 mechanical degrees, N cycles. Position Error ( ): The normalized angular difference between the actual shaft position and the position indicated by the encoder cycle count. Cycle Error ( C): An indication of cycle uniformity. The difference between an observed shaft angle which gives rise to one electrical cycle, and the nominal angular increment of 1/N of a revolution. Pulse Width (P): The number of electrical degrees that an output is high during 1 cycle. This value is nominally 180e or 1/2 cycle. Pulse Width Error ( P): The deviation, in electrical degrees, of the pulse width from its ideal value of 180e. State Width (S): The number of electrical degrees between a transition in the output of channel A and the neighboring transition in the output of channel B. There are 4 states per cycle, each nominally 90e. State Width Error ( S): The deviation, in electrical degrees, of each state width from its ideal value of 90e. Phase (): The number of electrical degrees between the center of the high state of channel A and the center of the high state of channel B. This value is nominally 90e for quadrature output. Phase Error (): The deviation of the phase from its ideal value of 90e. 4 Absolute Maximum Ratings Parameter Storage Temperature, TS HEDS-55XX/56XX -40C to 100C HEDM-550X/560X -40C to +70C Operating Temperature, TA Supply Voltage, VCC Output Voltage, VO -40C to 100C -0.5 V to 7 V -0.5 V to VCC -40C to +70C -0.5 V to 7 V -0.5 V to VCC Output Current per Channel, IOUT Vibration -1.0 mA to 5 mA 20 g, 5 to 1000 Hz -1.0 mA to 5 mA 20 g, 5 to 1000 Hz Shaft Axial Play Shaft Eccentricity Plus Radial Play Velocity 0.25 mm ( 0.010 in.) 0.1 mm (0.004 in.) TIR 30,000 RPM 0.175 mm ( 0.007 in.) 0.04 mm (0.0015 in.) TIR 30,000 RPM Acceleration 250,000 rad/sec2 250,000 rad/sec2 Direction of Rotation: When the codewheel rotates in the counterclockwise direction (as viewed from the encoder end of the motor), channel A will lead channel B. If the codewheel rotates in the clockwise direction, channel B will lead channel A. Index Pulse Width (PO ): The number of electrical degrees that an index output is high during one full shaft rotation. This value is nominally 90e or 1/4 cycle. Output Waveforms 5 Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Units Notes Temperature HEDS Series TA -40 100 C Temperature HEDM Series TA -40 70 C Supply Voltage VCC 4.5 5.5 Volts Load Capacitance CL 100 pF 2.7 k pull-up Count Frequency f 100 kHz Velocity (rpm) x N/60 Shaft Perpendicularity Plus Axial Play (HEDS Series) 0.25 ( 0.010) mm (in.) 6.9 mm (0.27 in.) from mounting surface Shaft Eccentricity Plus Radial Play (HEDS Series) 0.04 mm (in.) (0.0015) TIR 6.9 mm (0.27 in.) from mounting surface Shaft Perpendicularity Plus Axial Play (HEDM Series) 0.175 ( 0.007) 6.9 mm (0.27 in.) from mounting surface Shaft Eccentricity Plus Radial Play(HEDM Series) 0.04 mm (in.) (0.0015) TIR 5.0 mm (in.) non-condensing atmosphere Ripple < 100 mVp-p 6.9 mm (0.27 in.) from mounting surface Note: The module performance is guaranteed to 100 kHz but can operate at higher frequencies. 2.7 k pull-up resistors required for HEDS-5540 and 5640. Encoding Characteristics Encoding Characteristics over Recommended Operating Range and Recommended Mounting Tolerances unless otherwise specified. Values are for the worst error over the full rotation. Part No. Description Sym. Min. Typ.* Max. Units HEDS-5500 HEDS-5600 (Two Channel) Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error P S C 7 5 2 10 3 45 45 20 40 5.5 e e e min. of arc e HEDM-5500 HEDM-5600 (Two Channel) Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error P S C 10 10 2 10 3 45 45 15 40 7.5 e e e min. of arc e HEDS-5540 HEDS-5640 (Three Channel) Pulse Width Error Logic State Width Error Phase Error Position Error Cycle Error Index Pulse Width P S C PO 55 5 5 2 10 3 90 35 35 15 40 5.5 125 e e e min. of arc e e -40C to +100C t2 -300 100 250 ns CH. I fall after -40C to +100C CH. B or CH. A rise t2 70 150 1000 ns CH. I rise after CH. A or CH. B fall Note: See Mechanical Characteristics for mounting tolerances. *Typical values specified at VCC = 5.0 V and 25C. 6 Electrical Characteristics Electrical Characteristics over Recommended Operating Range. Part No. HEDS-5500 HEDS-5600 Parameter Sym. Min. Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time ICC VOH VOL tr tf HEDS-5540 HEDS-5640 HEDM-5500 HEDM-5600 Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time ICC VOH VOL tr tf 30 2.4 HEDM-5500 HEDM-5600 Supply Current High Level Output Voltage Low Level Output Voltage Rise Time Fall Time ICC VOH VOL tr tf 30 2.4 *Typical values specified at VCC = 5.0 V and 25C. Typ.* Max. Units Notes 17 40 mA V V ns ns IOH = -40 A max. IOL = 3.2 mA CL = 25 pF RL = 11 k pull-up mA V V ns ns IOH = -200 A max. IOL = 3.86 mA CL = 25 pF RL = 2.7 k pull-up mA V V ns ns IOH = -40 A max. IOL = 3.86 mA CL = 25 pF RL = 3.2 k pull-up 2.4 0.4 200 50 57 85 0.4 180 40 57 85 0.4 180 40 7 Mechanical Characteristics Parameter Symbol Codewheel Fits These Standard Shaft Diameters 2 3 5 6 5/32 3/16 Moment of Inertia J Tolerance[1] Units 4 8 +0.000 -0.015 mm 1/8 1/4 +0.0000 -0.0007 in Dimension 0.6 (8.0 x 10-6 ) g-cm2 (oz-in-s2) 14.0 (0.55) 0.5 ( 0.02) mm (in.) 2 screw mounting 19.05 (0.750) 0.13 ( 0.005) mm (in.) 3 screw mounting 20.90 (0.823) 0.13 ( 0.005) mm (in.) external mounting ears 46.0 (1.811) 0.13 ( 0.005) mm (in.) 2 screw mounting M 2.5 or (2-56) mm (in.) 3 screw mounting M 1.6 or (0-80) mm (in.) external mounting ears M 2.5 or (2-56) mm (in.) 0.33 (0.130) mm (in.) (2-56) (in.) Required Shaft Length[2] Bolt Circle[3] Mounting Screw Size[4] Encoder Base Plate Thickness Hub Set Screw Notes: 1. These are tolerances required of the user. 2. The HEDS-55X5 and 56X5, HEDM-5505, 5605 provide an 8.9 mm (0.35 inch) diameter hole through the housing for longer motor shafts. See Ordering Information. 3. The HEDS-5540 and 5640 must be aligned using the aligning pins as specified in Figure 3, or using the alignment tool as shown in "Encoder Mounting and Assembly". See also "Mounting Considerations." 4. The recommended mounting screw torque for 2 screw and external ear mounting is 1.0 kg-cm (0.88 in-lbs). The recommended mounting screw torque for 3 screw mounting is 0.50 kg-cm (0.43 in-lbs). Electrical Interface To insure reliable encoding performance, the HEDS-5540 and 5640 three channel encoders require 2.7 k ( 10%) pull-up resistors on output pins 2, 3, and 5 (Channels I, A, and B) as shown in Figure 1. These pull-up resistors should be located as close to the encoder as possible (within 4 feet). Each of the three encoder outputs can drive a single TTL load in this configuration. The HEDS-5500, 5600, and HEDM-5500, 5600 two channel encoders do not normally require pull-up resistors. However, 3.2 k pull-up resistors on output pins 3 and 5 (Channels A and B) are recommended to improve rise times, especially when operating above 100 kHz frequencies. 8 Figure 1. Pull-up Resistors on HEDS-5X40 Encoder Outputs. Mounting Considerations The HEDS-5540 and 5640 three channel encoders and the HEDM Series high resolution encoders must be aligned using the aligning pins as specified in Figure 3, or using the HEDS-8910 Alignment Tool as shown in Encoder Mounting and Assembly. two channel encoders are attached to a motor with the screw sizes and mounting tolerances specified in the mechanical characteristics section without any additional mounting bosses, the encoder output errors will be within the maximums specified in the encoding characteristics section. The use of aligning pins or alignment tool is recommended but not required to mount the HEDS-5500 and 5600. If these The HEDS-5500 and 5540 can be mounted to a motor using either the two screw or three screw 11.10 / 10.94 (0.438 / 0.431) 2.39 / 2.34 (0.096 / 0.092) Figure 2. Mounting Holes. Figure 3. Optional Mounting Aids. mounting option as shown in Figure 2. The optional aligning pins shown in Figure 3 can be used with either mounting option. The HEDS-5600, 5640, and HEDM-5600 have external mounting ears which may be used for mounting to larger motor base plates. Figure 4 shows the necessary mounting holes with optional aligning pins and motor boss. 9 2.39 / 2.34 (0.096 / 0.092) 0.25 (0.010) X 45 CHAMFER 2 PLACES A O 0.15 (0.006) 0.8 (0.03) X 45 CHAMFER O A 0.05 (0.002) 11.10 / 10.94 (0.438 / 0.431) Figure 4. Mounting with External Ears. 10 Encoder Mounting and Assembly 1. For HEDS-5500 and 5600: Mount encoder base plate onto motor. Tighten screws. Go on to step 2. 2. Snap encoder body onto base plate locking all 4 snaps. 1a. For HEDS-5540, 5640 and HEDM-5500, 5600: Slip alignment tool onto motor shaft. With alignment tool in place, mount encoder baseplate onto motor as shown above. Tighten screws. Remove alignment tool. 3a. Push the hex wrench into the body of the encoder to ensure that it is properly seated into the code wheel hub set screws. Then apply a downward force on the end of the hex wrench. This sets the code wheel gap by levering the code wheel hub to its upper position. 3b. While continuing to apply a downward force, rotate the hex wrench in the clockwise direction until the hub set screw is tight against the motor shaft. The hub set screw attaches the code wheel to the motor's shaft. 3c. Remove the hex wrench by pulling it straight out of the encoder body. 4. Use the center screwdriver slot, or either of the two side slots, to rotate the encoder cap dot clockwise from the one dot position to the two dot position. Do not rotate the encoder cap counterclockwise beyond the one dot position. The encoder is ready for use! 11 Connectors Manufacturer Part Number AMP 103686-4 640442-5 Dupont/Berg 65039-032 with 4825X-000 term. Agilent (designed to mechanically lock into the HEDS-5XXX, HEDM-5X0X Series) HEDS-8902 (2 ch.) with 4-wire leads Molex 2695 series with 2759 series term. HEDS-8903 (3 ch.) with 5-wire leads * N/A* * Figure 5. HEDS-8902 and 8903 Connectors. Typical Interfaces HEDS-55XX CH. A OR HEDS-56XX CH. B OR HEDM-5X0X HEDS-55XX OR HEDS-56XX OR HEDM-5X0X CH. A CH. B HCTL-2016/ 2020 QUADRATURE DECODER/ COUNTER HCTL-1100 MOTION CONTROL IC HOST PROCESSOR HOST PROCESSOR 12 Ordering Information Encoders with Film Codewheels HEDM-5 Mounting Type 5 - Standard 6 - External Mounting Ears Outputs 0 - 2 Channel 0 Through Hole 0 - None 5 - 8.9 mm (0.35 in.) HEDS-8910 0 Option Resolution (Cycles/Rev) B - 1000 CPR J - 1024 CPR Shaft Diameter 01 - 2 mm 06 - 1/4 in. 02 - 3 mm 11 - 4 mm 03 - 1/8 in. 14 - 5 mm 04 - 5/32 in. 12 - 6 mm 05 - 3/16 in. 13 - 8 mm Alignment Tool (Included with each order of HEDM-550X/560X two channel encoders) Encoders with Metal Codewheels HEDS-5 Mounting Type 5 - Standard 6 - External Mounting Ears Outputs 0 - 2 Channel 4 - 3 Channel Through Hole 0 - None 5 - 8.9 mm (0.35 in.) Option Resolution (Cycles/Rev) (HEDS-550X, 560X 2 Channel) S - 50 CPR F - 256 CPR K - 96 CPR G - 360 CPR C - 100 CPR H - 400 CPR D - 192 CPR A - 500 CPR E - 200 CPR I - 512 CPR Shaft Diameter 01 - 2 mm 06 - 1/4 in. 02 - 3 mm 11 - 4 mm 03 - 1/8 in. 14 - 5 mm 04 - 5/32 in. 12 - 6 mm 05 - 3/16 in. 13 - 8 mm (HEDS-554X, 564X 3 Channel) G - 360 CPR S - 50 CPR H - 400 CPR K - 96 CPR A - 500 CPR C - 100 CPR I - 512 CPR E - 200 CPR F - 256 CPR HEDS-8910 0 Alignment Tool (Included with each order of HEDS-554X/564X three channel encoders) 13 HEDM-5500 B J HEDM-5505 B J 01 02 * * * 03 04 05 06 * * * HEDM-5605 B J * * HEDS-5500 A C E F G H I K S HEDS-5545 HEDS-5600 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * A C E F G H I K * * * * * * * * * * * * * * * * * * * * * * * * * * A C H I A C E G H I * * * * * A C E F G H I * * * B J HEDS-5540 * * * HEDM-5600 HEDS-5505 11 12 13 14 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 14 01 HEDS-5605 02 03 40 05 06 11 12 13 14 A C E F G H I * * * * HEDS-5640 A E F H * * * * * * HEDS-5645 A C E G H I * * * * * * * * * * * * * * * www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-2579EN January 17, 2002 5988-3996EN