330FK360VI918X43 - RUBYCON

non-QPL

MIL-STD-1553

INTERFACE

TRANSFORMERS

Pulse Specialty Components

Two Pearl Buck Court

Bristol, PA 19007-6812

Tel 215-781-6400 nFax 215-781-6403

www.pulsespecialty.com

For QPL pulse transformers....

In addition to the non-QPL transformers described in

this catalog, Pulse Specialty Components offers many

transformer models qualified for QPL/military applications.

These include:

nsurface-mount or through-the-board

nsingle- or dual-ratio

For more information, ask for our catalog entitled

“QPL MIL-STD-1553 INTERFACE TRANSFORMERS “

PULSE SPECIALTY COMPONENTS

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 2

As part of Pulse, Specialty Components has access

to offshore manufacturing, state-of-the-art packag-

ing technology and worldwide purchasing power to

provide extremely cost-effective products for cus-

tomers. Many low-power pulse transformer prod-

ucts have been developed in response to the Perry

Initiative and its COTs mandate.

The products shown on the next page and described

in this catalog have performance and electrical char-

acteristics compliant with MIL-PRF-21038/27 but

have been tailored in response to the demands of

today's marketplace....

nCOTs models for reduced-requirement

military applications (non-QPL) and reduced cost

nLow profile for reduced board-stacking height

nSingle- ratio and dual-ratio

nSingle interface and dual interface

nVertically stacked dual interface

n0-70OC or -40 to +85OC or -55 to +125OC

nHermetically sealed for extreme environments

Browse the next page to find and select the product

that meets your non-QPL requirements. Request

our catalog on QPL MIL-PRF-21038 transformers

for applictions calling for QPL components.

Value Series -- COTS

nstandard profile

ndual ratio

nthrough the board

ndual interface

nstacked

ndual ratio

nsurface-mount flat pack

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 3

nlow profile

ndual ratio

nthrough the board

nlow profile

ndual ratio

nsurface-mount flat pack

ndual interface

nlow profile

ndual ratio

nthrough the board

ndual interface

nlow profile

ndual ratio

nsurface-mount flat pack

ndual interface

nlow profile

ndual ratio

nsurface-mount gull wing

ndual interface

nstacked

ndual ratio

nthrough the board

Contents

nlow profile

ndual ratio

nsurface-mount gull wing

nsingle interface

ndual ratio

nsurface-mount

flat pack

The package shown here as

“Value Series COTS” is

also available fully qualified to

MIL-PRF-21038/27 requirements.

Hermetically Sealed

ndual interface

nstacked

ndual ratio

nsurface-mount gull wing

PULSE SPECIALTY COMPONENTS

pg 4 pg 6 pg 6

pg 8 pg 10 pg 10

pg 12 pg 14 pg 14

pg 16

pg 16 pg 18

pg 18

PULSE SPECIALTY COMPONENTS

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 4

Through the board

low profile MIL-PRF-21038

Interface Transformers

These non-QPL interface transformers are built and tested in ISO

9002 approved facilities. They conform to all electrical and physical

parameters of MIL-PRF-21038/27. Choose one of three operating

temperature ranges including 0Oto +70OC, -40Oto +85OC, or

-55Oto +125OC.

ndual ratio, single interface (see schematic)

nthrough the board package

nfor use in MIL-STD-1553 applications

nlow profile, 0.155 in. height

nperformance to MIL-PRF-21038/27 requirements

nbuilt in ISO 9002 facility

SUMMARY PERFORMANCE SPECIFICATIONS

Impedance.................................................................................. see table, next page

Droop.............................................................................................................. <20%

Overshoot.................................................................................................. +1V max

Common mode rejection (CMR)................................................................. >45 dB

Frequency range (no load)............................................................. 75 kHz to 1MHz

Operating temperature range..................................................... see table, next page

Weight....................................................................................................... <5 grams

Insulation resistance (min)........................................... 10K megohms @ 250 Vdc

Dielectric withstanding voltage................................................................ 100 Vrms

0Oto 70OC

-40Oto +85OC

-55O to +125OC

prefix

operating temp.

TLN

TLC

APPLICABLE SPECIFICATIONS

nMIL-STD-1553B

nMIL-STD-202

nMIL-T-10727

nMIL-PRF-21038

nISO 9002

back to “

Contents”

PULSE SPECIALTY COMPONENTS

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 5

CHARACTERISTICS

PART NO . TE RM I NALS RATIO (±3 % ) RDC

(ohms)

MAX.

IMPEDANCE

(ohms)

MIN.

(XXX)1553-1 1-3:4-8

1-3:5-7

1CT:1CT

1CT:.707CT

1-3 = 3.0

4-8 = 3.0

(1-3)

4,000

(XXX)1553-2 1-3:4-8

1-3:5-7

1.4CT:1CT

2CT:1CT

1-3 = 3.5

4-8 = 3.0

(1-3)

7,200

(XXX)1553-3 1-3:4-8

1-3:5-7

1.25CT:1CT

1.66CT:1CT

1-3 = 3.2

4-8 = 3.0

(1-3)

4,000

(XXX)1553-5 1-3:4-8

1-3:5-7

1CT:2.12CT

1CT:1.5CT

1-3 = 1.0

4-8 = 3.5

(4-8)

4,000

(XXX)1553-45 1-3:4-8

1-3:5-7

1CT:2.5CT

1CT:1.79CT

1-3 = 1.0

4-8 = 3.5

(4-8)

4,000

Notes:

1. All dimensions are in inches.

2. Tolerances: .xx = +.008

3. All specifications and dimensions

are subject to change without notice.

Designed for transceivers utilizing a

single supply voltage (+5V).

Refer to prefix table (right) to select

temperature range.

0Oto 70OC

-40Oto +85OC

-55O to +125OC

prefix

operating temp.

TLN

TLC

nlow profile

ndual ratio

nthrough the board

back to “

Contents”

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 6

Surface mount

low profile MIL-PRF-21038

Interface Transformers

These non-QPL interface transformers are built and tested in ISO

9002 approved facilities. They conform to all electrical and physical

parameters of MIL-PRF-21038/27. Choose one of three operating

temperature ranges including 0Oto +70OC, -40Oto +85OC, or

-55Oto +125OC.

ndual ratio, single interface (see schematic)

nsurface mount; gull wing or flat pack

nfor use in MIL-STD-1553 applications

nlow profile, 0.155 in. height

nperformance to MIL-PRF-21038/27 requirements

nbuilt in ISO 9002 facility

SUMMARY PERFORMANCE SPECIFICATIONS

Impedance.................................................................................. see table, next page

Droop.............................................................................................................. <20%

Overshoot.................................................................................................. +1V max

Common mode rejection (CMR)................................................................. >45 dB

Frequency range (no load)............................................................. 75 kHz to 1MHz

Operating temperature range.................................................... see table, next page

Weight....................................................................................................... <5 grams

Insulation resistance (min)........................................... 10K megohms @ 250 Vdc

Dielectric withstanding voltage................................................................ 100 Vrms

0Oto 70OC

-40Oto +85OC

-55O to +125OC

gull wing package flat pack

operating temp.

GLN FLN

FLCGLC

GL flat pack

gull wing package

APPLICABLE SPECIFICATIONS

nMIL-STD-1553B

nMIL-STD-202

nMIL-T-10727

nMIL-PRF-21038

nISO 9002

PULSE SPECIALTY COMPONENTS

back to “

Contents”

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 7

CHARACTERISTICS

PART NO. TERMINALS RATIO (±3%) RDC

(ohms)

MAX.

IMPEDANCE

(ohms)

MIN.

(XXX1553-1) 1-3:4-8

1-3:5-7 1CT:1CT

1CT:.707CT 1-3 = 3.0

4-8 = 3.0 (1-3)

4,000

(XXX1553-2) 1-3:4-8

1-3:5-7 1.4CT:1CT

2CT:1CT 1-3 = 3.5

4-8 = 3.0 (1-3)

7,200

(XXX1553-3) 1-3:4-8

1-3:5-7 1.25CT:1CT

1.66CT:1CT 1-3 = 3.2

4-8 = 3.0 (1-3)

4,000

(XXX1553-5) 1-3:4-8

1-3:5-7 1CT:2.12CT

1CT:1.5CT 1-3 = 1.0

4-8 = 3.5 (4-8)

4,000

(XXX1553-45) 1-3:4-8

1-3:5-7 1CT:2.5CT

1CT:1.79CT 1-3 = 1.0

4-8 = 3.5 (4-8)

4,000

FL(X)1553-(X)

Notes:

1. All dimensions are in inches.

2. Tolerances: .xx = +.008

3. All specifications and dimensions

are subject to change without notice.

GL(X)1553-(X)

Designed for transceivers utilizing a single supply voltage (+5V).

Refer to prefix table (below) to select temperature range and package.

0Oto 70OC

-40Oto +85OC

-55O to +125OC

gull wing package flat pack

operating temp.

GLN FLN

FLCGLC

nlow profile

ndual ratio

nsurface-mount

PULSE SPECIALTY COMPONENTS

back to “

Contents”

TWO PEARL BUCK COURT

BRISTOL, PA 19007-6812

TEL 215-781-6400

FAX 215-781-6403

www.pulsespecialty.com

Low Power Pulse Transformers — 8

Through the board dual

low profile MIL-PRF-21038

Interface Transformers

These non-QPL interface transformers are built and tested in ISO

9002 approved facilities. They conform to all electrical and physi-

cal parameters of MIL-PRF-21038/27. Choose one of three operat-

ing temperature ranges, including 0Oto +70OC, -40Oto +85OC, or

-55Oto +125OC.

ndual ratio, dual interface (see schematic)