VEML6030 www.vishay.com Vishay Semiconductors High Accuracy Ambient Light Sensor With I2C Interface FEATURES * Package type: surface mount * Dimensions (L x W x H in mm): 2 x 2 x 0.87 * Integrated modules: ambient light sensor (ALS) * Supply voltage range VDD: 2.5 V to 3.6 V * Communication via I2C interface * I2C bus H-level range: 1.7 V to 3.6 V * Floor life: 72 h, MSL 4, according to J-STD-020 * Low stand by current consumption: typ. 0.5 A * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION AMBIENT LIGHT FUNCTION VEML6030 is a high accuracy ambient light digital 16-bit resolution sensor in a miniature transparent 2 mm x 2 mm package. It includes a high sensitive photodiode, a low noise amplifier, a 16-bit A/D converter and supports an easy to use I2C bus communication interface and additional interrupt feature. * FiltronTM technology adaption: close to real human eye response * O-TrimTM technology adoption: ALS output tolerance 10 % The ambient light result is as digital value available. * 16-bit dynamic range for ambient light detection from 0 lx to about 120 klx with resolution down to 0.0036 lx/ct, supports low transmittance (dark) lens design APPLICATIONS * 100 Hz and 120 Hz flicker noise rejection * Ambient light sensor for mobile devices (e.g. smart phones, touch phones, PDA, GPS) for backlight dimming * Excellent temperature compensation * Ambient light sensor for industrial on- / off-lighting operation * Software shutdown mode control * High dynamic detection resolution * Optical switch for consumer, computing, and industrial devices and displays PRODUCT SUMMARY PART NUMBER VEML6030 OPERATING RANGE (mm) OPERATING VOLTAGE RANGE (V) I2C BUS VOLTAGE RANGE (V) AMBIENT LIGHT RANGE (lx) AMBIENT LIGHT RESOLUTION (lx) OUTPUT CODE ADC RESOLUTION PROXIMITY / AMBIENT LIGHT n/a 2.5 to 3.6 1.7 to 3.6 0 to 120 000 0.0036 16 bit, I2C - / 0.0036 ORDERING INFORMATION ORDERING CODE VEML6030 VEML6030-GS15 PACKAGING Tape and reel VOLUME (1) MOQ: 3000 MOQ: 10 000 REMARKS 2.0 mm x 2.0 mm x 0.87 mm Note (1) MOQ: minimum order quantity Rev. 1.3, 12-May-17 Document Number: 84366 1 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER SYMBOL MIN. MAX. UNIT Supply voltage TEST CONDITION VDD 0 4 V Operation temperature range Tamb -25 +85 C Storage temperature range Tstg -25 +85 C Ptot - 50 mW Tj - 110 C Tamb 25 C Total power dissipation Junction temperature BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. VDD 2.5 3.3 3.6 V VDD is 3.3 V Isd - 0.5 - A VDD is 3.3 V, PSM = 11, refresh time 4100 ms IDD - 2 - A VDD is 3.3 V, PSM = 00, refresh time 600 ms IDD - 8 - A VDD is 3.3 V, PSM_EN = 0, refresh time 100 ms IDD - 45 - A kHz Supply voltage Shut down current (2) Operation mode current (1) I2C clock rate range UNIT fSCL 10 - 400 I2C bus input H-level range VDD is 3.3 V Vih 1.3 - 3.6 V I2C bus input L-level range VDD is 3.3 V Vil - 0.4 V - - mA lx/step Digital current out (low, current sink) Iol 3 Digital resolution (LSB count) with ALS_GAIN = "01" - 0.0036 - Detectable minimum illuminance with ALS_GAIN = "01" EV min. - 0.0072 - lx Detectable maximum illuminance with ALS_GAIN = "10" EV max. - 120 000 - lx Dark offset (1) with ALS_GAIN = "01" - 3 - step Notes (1) Light source: white LED (2) Light conditions: dark CIRCUIT BLOCK DIAGRAM VEML6030 GND 1 6 VDD Temperature sensor Low pass filter SDA 2 Timing controller Output buffer I2C interface ALS-PD INT 3 5 SCL 4 ADDR Oscillator Fig. 1 - Block Diagram Rev. 1.3, 12-May-17 Document Number: 84366 2 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors I2C TIMING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER SYMBOL Clock frequency STANDARD MODE (1) MIN. MAX. f(SMBCLK) 10 t(BUF) 4.7 t(HDSTA) Repeated start condition setup time Stop condition setup time Data hold time Data setup time I2C clock (SCK) low period I2C clock (SCK) high period UNIT MAX. 100 10 400 kHz - 1.3 - s 4.0 - 0.6 - s t(SUSTA) 4.7 - 0.6 - s t(SUSTO) 4.0 - 0.6 - s t(HDDAT) 0 3450 0 900 ns t(SUDAT) 250 - 100 - ns t(LOW) 4.7 - 1.3 - s Bus free time between start and stop condition Hold time after (repeated) start condition; after this period, the first clock is generated FAST MODE (1) MIN. t(HIGH) 4.0 - 0.6 - s t(TIMEOUT) 25 35 - - ms Clock / data fall time t(F) - 300 - 300 ns Clock / data rise time t(R) - 1000 - 300 ns Detect clock / data low timeout Note (1) Data based on standard I2C protocol requirement, not tested in production t(LOW) I2C bus clock (SLCK) t(R) t(F) VIH VIL t(HDSTA) t(HIGH) t(SUSTA) t(SUSTO) t(BUF) t(HDDAT) I2C bus data (SDAT) t(SUDAT) VIH Start { S Start condition { P Stop condition { { VIL S P Stop t(LOSEXT) SCLKACK t(LOWMEXT) SDAACK t(LOWMEXT) t(LOWMEXT) I2C bus clock (SLCK) I2C bus data (SDAT) Fig. 2 - I2C Timing Diagram Rev. 1.3, 12-May-17 Document Number: 84366 3 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors PARAMETER TIMING INFORMATION I2C bus clock (SCLK) I2C bus data (SDAT) SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA7 W SA6 SA5 SA4 SA3 SA2 SA1 SA0 ACK Start by master ACK I2C bus slave address byte Command code I2C bus clock (SCLK) I2C bus data (SDAT) SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA0 SA6 SA7 SA5 SA4 SA3 SA2 SA1 SA0 ACK ACK Data byte low Stop by master Data byte high Fig. 3 - I2C Bus Timing for Sending Word Command Format I2C bus clock (SCLK) I2C bus data (SDAT) SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA7 W SA6 SA5 SA4 SA3 SA2 SA1 SA0 ACK Start by master ACK I2C bus slave address byte Command code I2C bus clock (SCLK) I2C bus data (SDAT) SA7 SA6 SA5 SA4 SA3 SA2 R SA1 SA7 SA6 SA5 SA4 SA3 ACK Start by master SA2 SA1 SA0 ACK by master I2C bus slave address byte Data byte low I2C bus clock (SCLK) I2C bus data (SDAT) SA7 SA6 SA5 SA4 SA3 SA2 SA1 SA0 NACK by master Stop by master Data byte high Fig. 4 - I2C Bus Timing for Receive Word Command Format Rev. 1.3, 12-May-17 Document Number: 84366 4 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 120 100 Normalized Responsivity Normalized Responsivity 120 VEML6030 80 60 V() 40 20 0 100 80 60 40 20 0 400 500 600 700 800 900 1000 250 350 450 550 650 750 850 950 1050 - Wavelength (nm) - Wavelength (nm) Fig. 5 - Spectral Response Fig. 6 - White Channel Responsivity ALS sensitivity spectrum close to human eye photopic curve V(). Human eye curve adaption achieved by Filtron technology. 0 20 0.9 40 0.8 0.7 60 0.6 80 nom. -10 % nom. nom. +10 % 100 Reading of ALS (klx) 1.0 - Angular Displacement Srel - Relative Sensitivity 120 80 60 40 20 0 0 0.5 0.4 0.3 0.2 0.1 0 20 40 60 80 100 120 Brightness Acc. Calibrated Luxmeter (klx) 22308 Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement Rev. 1.3, 12-May-17 Fig. 8 - ALS measurement deviation between different light sources: 10 % Document Number: 84366 5 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors APPLICATION INFORMATION VEML6030 is a cost effective solution of ambient light sensor with I2C bus interface. The standard serial digital interface is easy to access "Ambient Light Signal" without complex calculation and programming by external controller. Beside the digital output also a flexible programmable interrupt pin is available. 1. Application Circuit 1.7 V to 3.6 V R1 R2 R3 GND (1) 2.5 V to 3.6 V R4 C1 10R C2 VDD (6) 10 F 100 nF C1 and R4 are optional for very disturbed supply Host Micro Controller VEML6030 SDA (2) I2C bus data SDA SCL (5) I2C bus clock SCL ADDR (4) INT (3) GPIO (interrupt) Fig. 9 - Application Circuit (x) = Pin Number Notes * The interrupt pin is an open drain output. Proposed values for the pull-up resistors should be > 1 k, e.g. 2.2 k to 4.7 k for the R1 and R2 (at SDA and SCL) and 10 k to 100 k for R3 (at interrupt). Normally just one decoupling capacitor is needed. This should be 100 nF and placed close to the VDD pin. Pin ADDR allows for the device addresses: pin 4 = high (VDD) = 0x48, pin 4 = low (GND) = 0x10 For detailed description about set-up and use of the interrupt as well as more application related information see AN: "Designing VEML6030 into an Application" 2. I2C Interface The VEML6030 contains actual six 16 bit command codes for operation control, parameter setup, and result buffering. All registers are accessible via I2C communication. Figure 7 shows the basic I2C communication with VEML6030. The built in I2C interface is compatible with I2C modes "standard" and "fast": 10 kHz to 400 kHz. I2C H-level range = 1.3 V to 3.6 V. Please refer to the I2C specification from NXP for details. Send byte S Slave address Receive byte S Write command to VEML6030 Wr A Command code A Data byte (LSB) A Data byte (MSB) A P Read data from VEML6030 Slave address S = start condition P = stop condition A = acknowledge N = no acknowledge Wr A A Command code S Slave address Rd A Data byte (LSB) A Data byte (MSB) N P Host action VEML6030 response Fig. 10 - Send Byte / Receive Byte Protocol Device Address The VEML6030 has two fix slave addresses for the host programming and accessing selection. With ADDR pin plugged to power supply = high = VDD, the predefined 7 bit I2C bus address is set to 1001000 = 0x48. The least significant bit (LSB) defines read or write mode. Accordingly the bus address is set to 1001 0000 = 90h for write and 1001 0001 = 91h for read. Rev. 1.3, 12-May-17 With ADDR pin plugged to ground = low, the slave address (7 bit) is set to 0010000 = 0x10. According 8 bit the bus address is then 0010 0000 = 20h for write and 0010 0001 = 21h for read. Document Number: 84366 6 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors Register Addresses Auto-Memorization VEML6030 has actual six user accessible 16 bit command codes. VEML6030 can memorize the last ambient data before shutdown and keep this data before waking up. The addresses are 00h to 06h (03h not defined / reserved). When VEML6030 is in shutdown mode, the host can freely read this data via read command directly. When VEML6030 wakes up, the data will be refreshed by new detection. COMMAND REGISTER FORMAT COMMAND CODE REGISTER NAME BIT 00 ALS_CONF 0 15 : 0 ALS gain, integration time, interrupt, and shut down W 15 : 8 ALS high threshold window setting (MSB) W W 01 ALS_WH 02 ALS_WL 03 Power saving 04 ALS 05 WHITE 06 ALS_INT FUNCTION / DESCRIPTION R/W 7:0 ALS high threshold window setting (LSB) 15 : 8 ALS low threshold window setting (MSB) W 7:0 ALS low threshold window setting (LSB) W 15 : 0 Set (15 : 3) 0000 0000 0000 0b 15 : 8 MSB 8 bits data of whole ALS 16 bits R 7:0 LSB 8 bits data of whole ALS 16 bits R 15 : 8 MSB 8 bits data of whole WHITE 16 bits R 7:0 LSB 8 bits data of whole WHITE 16 bits R 15 : 0 ALS INT trigger event R Note * Command code 0 default value is 01 = devices is shut down Command Code #0: Configuration Register Register address = 00h The command code #0 is for configuration of the ambient light measurements. TABLE 1 - CONFIGURATION REGISTER #0 REGISTER NAME BIT Reserved 15 : 13 Set 000b W ALS_GAIN 12 : 11 Gain selection 00 = ALS gain x 1 01 = ALS gain x 2 10 = ALS gain x (1/8) 11 = ALS gain x (1/4) W reserved 10 Set 0b W 9:6 ALS integration time setting 1100 = 25 ms 1000 = 50 ms 0000 = 100 ms 0001 = 200 ms 0010 = 400 ms 0011 = 800 ms W ALS_PERS 5:4 ALS persistence protect number setting 00 = 1 01 = 2 10 = 4 11 = 8 W Reserved 3:2 Set 00b W W W ALS_IT FUNCTION / DESCRIPTION ALS_INT_EN 1 ALS interrupt enable setting 0 = ALS INT disable 1 = ALS INT enable ALS_SD 0 ALS shut down setting 0 = ALS power on 1 = ALS shut down R/W Note * Light level [lx] is (ALS OUTPUT DATA [dec.] / ALS Gain x responsivity). Please study also the application note Rev. 1.3, 12-May-17 Document Number: 84366 7 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors Command Code #1: High Threshold Windows Setting Command code address = 01h. Once enable INT function and use high / low windows threshold, bit 15:0 provides 16 bit register for high bound threshold windows setting. TABLE 2 - HIGH THRESHOLD WINDOWS SETTING #1 Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Description ALS high threshold window setting (15:8 MSB 8 bits of whole 16 bits) ALS high threshold window setting (7:0 LSB 8 bits of whole 16 bits) Command Code #2: Low Threshold Windows Setting Command code address = 02h. Once enable INT function and use high / low windows threshold, bit 15:0 provides 16 bit register for low bound threshold windows setting. TABLE 3 - LOW THRESHOLD WINDOWS SETTING #2 Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Description ALS low threshold window setting (15:8 MSB 8 bits of whole 16 bits) ALS low threshold window setting (7:0 LSB 8 bits of whole 16 bits) Command Code #3: Power Saving Mode: PSM Command code address = 03h. Bits 2 and 1 define the power saving modes. Bits 15 : 3 are reserved. TABLE 4 - POWER SAVING MODES COMMAND CODE REGISTER NAME BIT PSM 2:1 PSM_EN 0 03 FUNCTION / DESCRIPTION R/W Power saving mode; see table "Refresh time" 00 = mode 1 01 = mode 2 10 = mode 3 11 = mode 4 W Power saving mode enable setting 0 = disable 1 = enable W Command Code #4: ALS High Resolution Output Data Command code address = 04h. To access 16 bit high resolution ALS output, it is suitable to follow read protocol to read from command code #04 16 bits register. TABLE 5 - ALS HIGH RESOLUTION OUTPUT DATA #4 Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Description ALS high resolution output data (15 : 8 MSB 8 bits of whole 16 bits) ALS high resolution output data (7 : 0 LSB 8 bits of whole 16 bits) Command Code #5: White Channel Output Data Command code address = 05h. To access 16 bit WHITE output, it is suitable to follow read protocol to read from command code #05 16 bits register. TABLE 6 - WHITE CHANNEL OUTPUT DATA #5 Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Description WHITE output data (15 : 8 MSB 8 bits of whole 16 bits) WHITE output data (7 : 0 LSB 8 bits of whole 16 bits) Rev. 1.3, 12-May-17 Document Number: 84366 8 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors Command Code #6: Interrupt Status Command code address = 06h. Bit 15 defines interrupt flag while trigger occurred due to data crossing low threshold windows. Bit 14 defines interrupt flag while trigger occurred due to data crossing high threshold windows. TABLE 7 - INTERRUPT STATUS #6 Bit 15 Bit 14 int_th_low int_th_high Bit 13 to 0 reserved Description int_th_low Read bit. Indicated a low threshold exceed int_th_high Read bit. Indicated a high threshold exceed REFRESH TIME DETERMINATION OF PSM VEML6030's refresh time can be determined by PSM and ALS_IT setting in power saving mode (PSM). Cooperating with the command register setting, the designer has a flexible method in defining the timing, power consumption, and sensitivity for light data collection. REFRESH TIME, IDD, AND RESOLUTION RELATION ALS_GAIN 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 Rev. 1.3, 12-May-17 PSM 00 01 10 11 00 01 10 11 00 01 10 11 00 01 10 11 ALS_IT 0000 0000 0000 0000 0001 0001 0001 0001 0010 0010 0010 0010 0011 0011 0011 0011 REFRESH TIME (ms) 600 1100 2100 4100 700 1200 2200 4200 900 1400 2400 4400 1300 1800 2800 4800 IDD (A) 8 5 3 2 13 8 5 3 20 13 8 5 28 20 13 8 RESOLUTION (lx/bit) 0.0288 0.0288 0.0288 0.0288 0.0144 0.0144 0.0144 0.0144 0.0072 0.0072 0.0072 0.0072 0.0036 0.0036 0.0036 0.0036 Document Number: 84366 9 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (0.6) 0.87 2 1 ADD 4 3 INT SCL 5 2 SDA VDD 6 1 GND 1 2 Top View Pinning 2 Recommended Footprint Technical drawings according to DIN specification 1.6 0.3 (6 x) 0.35 (4 x) 0.65 (4 x) Pin 1 marking 0.55 (6 x) 2.3 0.45 (6 x) Drawing No.: 6.550-5348.01-4 Issue: 1; 19.02.16 Rev. 1.3, 12-May-17 0.4 (6 x) Not indicated tolerances 0.1 Document Number: 84366 10 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters 8.4 +2.5 O 177.8 max. O 55 min. 8.4 +0.15 Z 14.4 max. Form of the leave open of the wheel is supplier specific. O20.2 min. 1.5 min. +0.5 O13 -0.2 Z 2:1 Technical drawings according to DIN specification. Drawing-No.: 9.800-5096.01-4 Issue: 5; 20.12.2016 Fig. 11 - 7" Reel, 3000 Pieces Rev. 1.3, 12-May-17 Document Number: 84366 11 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors 100 min. 330 max. Y Label Z Form of the leave open of the wheel is supplier specific. unreel direction 14.4 max. 8.4 +- 2.5 0 Z(2:1) Y(1:1) O 20.2 min. 1.5 mi n. O 13 +- 0.5 0.2 Drawing-No.: 9.800-5140.01-4 Issue: prel. 1; 02.03.2016 Technical drawings according to DIN specification. 8.4 +- 0.15 0 Fig. 12 - 13" Reel, 10 000 Pieces Rev. 1.3, 12-May-17 Document Number: 84366 12 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEML6030 www.vishay.com Vishay Semiconductors (O 1.5) (3.5) (4) (8) (O 1) (1.75) Y PIN 1 (2.3) (2) Reel off direction (4) Y Y-Y (2.3) (0.25) (1.25) technical drawings according to DIN specifications Drawing-No.: 9.700-5397.01-4 Issue: 1; 19.02.16 Fig. 13 - Taping REFLOW SOLDER PROFILE DRYPACK 300 Temperature (C) max. 260 C 245 C 255 C 240 C 217 C 250 200 150 Floor life: 72 h max. 100 s 100 max. ramp down 6 C/s 50 FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: max. 30 s max. 120 s Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Conditions: Tamb < 30 C, RH < 60 % Moisture sensitivity level 4, according to J-STD-020. max. ramp up 3 C/s DRYING 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 14 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020 Rev. 1.3, 12-May-17 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 C (+ 5 C), RH < 5 %. Document Number: 84366 13 For technical questions, contact: sensorstechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000