EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Technical Data Sheet
Chip LED with Bi-Color (Multi-Color)
11-22/R6G6C-A01/2T
Features
Package in 8mm tape on 7diameter reel.
Compatible with automatic placement equipment.
Compatible with infrared and vapor phase reflow
solder process.
Multi-color type.
Pb-free.
The product itself will remain within RoHS
compliant version.
Descriptions
The 11-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
Automotive: backlighting in dashboard and switch.
Telecommunication: indicator and backlighting in
telephone and fax.
Flat backlight for LCD, switch and symbol.
General use.
Device Selection Guide
Chip
Type Material Emitted Color Lens Color
R6 AlGaInP Brilliant Red
G6 AlGaInP Brilliant Yellow Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Blue
Package Outline Dimensions
Polarity 1
For reflow soldering (propose)
3.0
2.0
1.8
1.5
1.1
2.5
1.5
0.8
0.6
R0.45
0.5
Cathode mark
Green
Red
-
-
+
+
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Absolute Maximum Ratings (Ta=25)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF R6:25
G6:25 mA
Operating Temperature Topr -40 ~ +85
Storage Temperature Tstg -40 ~ +90
Soldering Temperature Tsol 260 (for 5 second)
Electrostatic Discharge (HBM) ESD 2000 V
Power Dissipation Pd R6:60
G6:60 mW
Peak Forward Current
(Duty 1/10 @1KHz) IFP R6:60
G6:60 mA
Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec.
Hand Soldering : 350 for 3 sec.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Electro-Optical Characteristics (Ta=25)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv R6
G6
140
45 225
72
-----
----- mcd
Viewing Angle 2θ1/2 ----- 60 ----- deg
Peak Wavelength λp R6
G6
----- 632
575 ----- nm
Dominant Wavelength λd R6
G6
-----
-----
624
573
-----
-----
nm
Spectrum Radiation
Bandwidth
△λ R6
G6 ----- 20
20 ----- nm
Forward Voltage VF 1.7 2.0 2.4 V
IF=20mA
Reverse Current IR ----- ----- 10 μA VR=5V
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Typical Electro-Optical Characteristics Curves
R6
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Typical Electro-Optical Characteristics Curves
G6
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level90%
LTPD10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100 15min
5 min
L : -40 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100 5min
10 sec
L : -10 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5 for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11
Device No. : DSE-112-C01 Prepared date: 22-Sep-2005 Prepared by: Ashley Kuo.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering
of each terminal. Be careful because the damage of the product is often started at the time of the hand
solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com