Infrared LED L10596 series Small emission spot LED using current conned chip The L10596 is infrared LED with a microball lens cemented to the current connement chip surface. This combination ensures narrow directivity and uniform emission. In particular, the L10596-02 uses a lens cap that delivers even narrower directivity. As a variant type not using a microball lens, the L10596-03 is also available with the LED chip potted with resin, which gives a small emission spot of 160 m. The L10569 series has a light-reAecting layer inserted between the emission section and the GaAs substrate, which increases the light output by 1.5 times (L10596-03: 1.3 times) that of conventional products. Features Applications High radiant output power: L10596/-02: 3.0 mW (IF=50 mA typ.) Automatic control systems Optical switches Uniform emission Small emission spot: L10596: 400 m L10596-03: 160 m Narrow directivity (L10596/-02) Absolute maximum ratings (Ta=25 C) Parameter Forward current Reverse voltage Symbol IF VR Pulse forward current IFP Operating temperature Storage temperature Topr Tstg Condition Value 80 3 Unit mA V 0.45 A -30 to +85 -40 to +100 C C Pulse width=10 s Duty ratio=1% *1 *1: The L10596-03 is guaranteed to resist temperature cycle test of up to 5 cycles. Electrical and optical characteristics (Ta=25 C) Parameter Peak emission wavelength Spectral half width Forward voltage Pulse forward voltage Reverse current Radiant Aux Cut-off frequency*2 Symbol Condition Min. 850 2.1 10 L10596 L10596-02 L10596-03 Typ. Max. Min. Typ. Max. Min. Typ. Max. 870 890 850 870 890 850 870 890 35 50 35 50 35 50 1.6 1.8 1.6 1.8 1.6 1.8 3.3 4.1 3.3 4.1 3.3 4.1 10 10 10 3.0 2.1 3.0 5.0 6.5 15 10 15 10 15 - IF=50 mA IF=50 mA IF=50 mA IF=0.45 A VR=3 V IF=50 mA IF=50 mA 10 mAp-p *2: Frequency at which the radiant output drops by 3 dB relative to the output at 100 kHz p VF VFP IR e fc www.hamamatsu.com Unit nm nm V V A mW MHz 1 Infrared LED L10596 series Emission spectrum Radiant flux vs. forward current (Typ. Ta=25 C, IF=50 mA) 100 (Typ. Ta=25 C, tw=100 s, 0.1%) 100 L10596-03 Radiant flux (mW) Relative radiant output (%) 80 60 40 10 L10596/-02 1 20 0.1 0 700 800 900 1 1000 10 100 1000 Forward current (mA) Wavelength (nm) KLEDB0304EA KLEDB0305EB Forward current vs. forward voltage Directivity (Typ. Ta=25 C, tw=100 s, 0.1%) 1000 20 10 0 10 (Typ. Ta=25 C) 20 30 30 40 40 50 Forward current (mA) 50 100 60 60 L10596-02 70 70 L10596 L10596-03* 80 90 100 10 80 60 40 20 80 0 20 40 60 80 90 100 Relative radiant output (%) 1 1.0 * L10596-03: Except for reflection ingredient of the base 1.5 2.0 2.5 3.0 3.5 Forward voltage (V) KLEDB0306EB KLEDB0307EB 2 Infrared LED L10596 series Radiant output vs. ambient temperature (Typ. IF=50 mA) Relative allowable forward current (%) +1 Relative radiant output (dB) Allowable forward current vs. ambient temperature 0 -1 -2 -3 -40 -20 0 20 40 60 80 100 Ambient temperature (C) 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) KLEDB0308EA KLEDB0309EA Allowable forward current vs. duty ratio (Typ. Ta=25 C) Allowable forward current (mA) 10000 Pulse width=1 s 1000 Pulse width=10 s 100 10 0.01 Pulse width=100 s 0.1 1 10 100 Duty ratio (%) KLEDB0310EA 3 Infrared LED L10596 series Dimensional outlines (unit: mm) Clear epoxy resin 2.3 0.3 4.65 0.1 0.45 Lead 13.5 4.5 0.2 13.5 0.45 Lead 5.4 0.1 4.2 0.1 3.6 0.2 4.7 0.1 Glass window 3.0 0.1 5.4 0.2 1.12 0.1 5.4 0.2 L10596-03 13.5 L10596-02 6.65 0.2 L10596 0.45 Lead 2.54 0.2 2.54 0.2 2.54 0.2 Common to case Common to case Common to case KLEDA0060EA KLEDA0058EA KLEDA0059EA Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed in the specification sheets or supplied as samples may have a suffix "(X)" which means tentative specifications or a suffix "(Z)" which means developmental specifications. (c)2010 Hamamatsu Photonics K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KLED1052E03 Jul. 2010 DN 4