D571C20N - Agere Systems, Inc.

Advance Data Sheet

April 2000

D571-Type Digital 1.5

m Uncooled DFB

FastLight

™

Laser Module

The low-proﬁle D571-Type Laser Module is ideally suited for

short- and long-haul SONET and other high-speed digital

applications.

Features

■

Eight-pin package suitable for SONET/SDH

applications

■

Narrow linewidth, distributed-feedback, multiquan-

tum-well (DFB-MQW), 1510 nm or 1550 nm laser

with single-mode ﬁber pigtail

■

Available in narrow and wide temperature ranges

■

No TEC required

■

High output power:

— Typical 2.0 mW peak power coupled into single-

mode ﬁber

— 1.0 mW devices are also available

Lucent

D571-10A

S/N-L651036

■

Hermetically sealed active components

■

Internal back-facet monitor

■

Qualiﬁcation program:

Telcordia Technologies

TA-983

Telcordia Technologies

is a trademark of Bell Communications

Research, Inc.

Applications

■

Long-reach SONET OC-3/STM-1, OC-12/STM-4

systems

■

Telecommunications

■

Secure digital data systems

Beneﬁts

■

Easily board mounted

■

Requires no lead bending

■

No additional heat sinks required

■

Pin compatible with industry-standard 14-pin laser

module

■

Highly efﬁcient DFB-MQW laser structure allows

for lower threshold and drive currents , and reduced

power consumption

Description

The D571-Type Uncooled Laser Module consists of a

laser diode coupled to a single-mode ﬁber pigtail.

The device is available in a standard, 8-pin conﬁgu-

ration (see Figure 1 and/or Table 1) and is ideal for

long-reach (SONET) and other high-speed digital

applications.

The laser diode is a narrow linewidth (<1 nm) DFB-

MQW single-mode laser and an InGaAs PIN photo-

diode back-facet monitor in an epoxy-free, hermeti-

cally sealed package.

D571-Type Digital 1.5

m Uncooled DFB Advance Data Sheet

FastLight

Laser Module April 2000

22 Lucent Technologies Inc.

Description

(continued)

The device characteristics listed in this document are

met at 2.0 mW output power. Higher- or lower-power

operation is possible. Under conditions of a ﬁxed pho-

todiode current, the change in optical output is typically

0.5 dB over an operating temperature range of

–40

C to +85

This device incorporates the new Laser 2000 manufac-

turing process developed by the Optoelectronic unit of

Lucent Technologies Microelectronics Group. Laser

2000 is a low-cost platform that targets high-volume

manufacturing and tighter product distributions on all

optical subassemblies. The platform incorporates an

advanced optical design that is produced on a highly

automated production line. The Laser 2000 platform is

qualiﬁed for the central ofﬁce and uncontrolled environ-

ments, and can be used for applications requiring high

performance and low cost.

Table 1. Pin Descriptions

Pin Number Connection

1 NC/Reserved

2 Case ground

3 NC/Reserved

4 Photodiode cathode

5 Photodiode anode

6 Laser diode cathode

7 Laser diode anode

8 NC/Reserved

Figure 1. D571-Type Digital Uncooled DFB Flat-PAC Laser Module Schematic, Top View

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-

lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess

of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended

periods can adversely affect device reliability.

* Rating varies with temperature.

Parameter Symbol Min Max Unit

Maximum Peak Laser Drive Current or

Maximum Fiber Power*

MAX

—

—150

10 mA

Peak Reverse Laser Voltage:

Laser

Monitor V

—

—2

20 V

Monitor Forward Current I

—2mA

Operating Case Temperature Range T

–40 85

Storage Case Temperature Range T

stg

–40 85

Lead Soldering Temperature/Time —

— 260/10

C/s

Relative Humidity (noncondensing) RH — 85 %

1-900 (C)

56 87

43 12

Advance Data Sheet D571-Type Digital 1.5

m Uncooled DFB

April 2000

FastLight

Laser Module

Lucent Technologies Inc.

Handling Precautions

CAUTION: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take proper

precautions during both handling and testing. Follow guidelines such as JEDEC Publication

No. 108-A (Dec. 1988).

Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD.

Electro-Optical Characteristics

* 1mW power option also available. See Table 4 for more information.

† BOL value; EOL = 80 mA.

‡ The slope efﬁciency is used to calculate the modulation current for a desired output power. This modulation current plus the threshold current

comprise the total operating current for the device.

= reverse voltage.

Table 2. Electro-Optical Characteristics

(over operating temperature range unless otherwise noted)

Parameter Symbol Test Conditions Min Typ Max Unit

Operating Temperature

Range T — –40 — 85

Optical Output Power* P

CW, nominal — 2 — mW

Threshold Current I

T = 25

T = full range

T = –10

C to + 70

—

Modulation Current I

MOD

CW, P

= 2.0 mW, T = 25

CW, I

MON

= constant,

T = full range

7.5 —

—35

†

Slope Efﬁciency

‡

SE CW, P

= 2.0 mW, T = 25

C 57 — 133

W/mA

Center W av elength

= 2.0 mW, CW 1525 — 1570 nm

Center W av elength

1510 nm codes

= 2.0 mW, CW 1500 — 1520 nm

Spectral Width (–20 dB)

∆λ

= 2.0 mW, 622 Mbits/s — — 1 nm

Side-mode Suppression

Ratio SMSR CW, P

= 2.0 mW 30 40 — dB

Tracking Error TE I

MON

= constant, CW –1.5 — 1.5 dB

Spontaneous Emission P

I = (0.9) I

— — 100

Rise/F all Times t

, t

10%—90% pulse

T = 25

C— 0.25 0.5 ns

F orward Voltage V

CW — 1.1 1.6 V

Input Impedance R — 3 — 8

Ω

Monitor Current I

MON

R§

= 5 V 100 — 1000

Monitor Dark Current I

R§

= 5 V — 10 200 nA

W av elength Tempera-

ture Coefﬁcient — — — 0.09 0.12 nm/

D571-Type Digital 1.5

m Uncooled DFB Advance Data Sheet

FastLight

Laser Module April 2000

4Lucent Technologies Inc.

Outline Diagram

Dimensions are in inches and (millimeters)

0.010

(0.254)

0.30

(

7.62

)

0.29

(7.37)

0.085

(2.16)

0.17

(4.32)

0.20 (5.00)

0.165 (4.20) 0.016 (0.410)

0.100 (2.54) 0.300

(7.62)

0.110 (2.79)

0.045 (1.143)

4321

5678

39.37 (1000) MIN

PIGTAIL LENGTH

0.52 (13.2)

1.06 (27.0)

MIN

TRADEMARK, CODE, LASER SERIAL NUMBER,

AND/OR DATE CODE IN APPROXIMATE AREA SHOWN

1-899.f

Advance Data Sheet D571-Type Digital 1.5

m Uncooled DFB

April 2000

FastLight

Laser Module

Lucent Technologies Inc.

Qualiﬁcation Information

The D571-Type Laser Module is scheduled to complete the following qualiﬁcation tests and meets the intent of

Telcordia Technologies

TR-NWT-000468 for interofﬁce environments and TA-TSY-000983 for outside plant environ-

ments.

Table 3. D571-Type Laser Module Qualiﬁcation Test Plan

Qualiﬁcation Test Conditions Sample Size Reference

Mechanical Shock 500 G for P/F

1,500 G for information 11 MIL-STD-883

Method 2002

Vibration 20 g, 20 Hz—2,000 Hz 11 MIL-STD-883

Method 2007

Solderability —11 MIL-STD-883

Method 2007

Thermal Shock Delta T = 100

C11 MIL-STD-883

Method 2003

Fiber Pull 1 kg; 3 times for P/F

2 kg; 3 times for information 11

Telcordia Technologies

983

Accelerated (Biased) Aging 85

C, 5,000 hrs. 25

Telcordia Technologies

983

Section 5.18

C Storage 1,000 hrs. for provisional qual.

2,000 hrs. for P/F

5,000 hrs. for information

Telcordia Technologies

983

Temperature Cycling 500 cycles for P/F

1,000 cycles for information 11

Telcordia Technologies

983

Section 5.20

Cyclic Moisture Resistance 10 cycles for P/F

20 cycles for information 11

Telcordia Technologies

983

Section 5.23

Damp Heat 40 °C, 95% RH

1,000 hrs. for provisional qual.

1,344 hrs. for P/F

11 MIL-STD-202

Method 103

Internal Moisture <5,000 ppm water vapor 11 MIL-STD-883

Method 1018

Flammability —— TR357

Sec. 4.4.2.5

ESD Threshold —6

Telcordia Technologies

983

Section 5.22

D571-Type Digital 1.5 µm Uncooled DFB Advance Data Sheet

FastLight

Laser Module April 2000

6Lucent Technologies Inc.

Laser Safety Information

Class IIIb Laser Product

FDA/CDRH Class IIIb laser product. All versions are Class IIIb laser products per CDRH, 21 CFR 1040 Laser

Safety requirements. All versions are Class IIIb laser products per

IEC

* 60825-1:1993. The device has been certi-

ﬁed with the FDA under accession number 8720010.

This product complies with 21 CFR 1040.10 and 1040.11.

8.3/125 µm single-mode ﬁber pigtail and connector (optional)

Wavelength = 1.5 µm

Maximum power = 10 mW

Because of size constraints, laser safety labeling is not afﬁxed to the module but attached to the outside of the

shipping carton.

Product is not shipped with power supply.

Caution: Use of controls, adjustments, and procedures other than those speciﬁed herein may result in

hazardous laser radiation exposure.

IEC

is a registered trademark of The International Electrotechnical Commission.

10 mW 1.5 µm

Advance Data Sheet D571-Type Digital 1.5 µm Uncooled DFB

April 2000

FastLight

Laser Module

Lucent Technologies Inc.

Ordering Information

* Connectors will meet

Telcordia Technologies

GR-326-CORE.

Table 4. Ordering Information

Device Code Comcode Pﬁber Wavelength Connector* Operating Case

Temperature

Range (°C)

D571-10A 108401118 1.0 mW 1550 nm SC-PC –40 to +85

D571-10F 108401068 1.0 mW 1550 nm FC-PC –40 to +85

D571-10N 108401142 1.0 mW 1550 nm none –40 to +85

D571-11A 108401159 1.0 mW 1550 nm SC-PC –10 to +70

D571-11F 108401175 1.0 mW 1550 nm FC-PC –10 to +70

D571-11N 108401191 1.0 mW 1550 nm none –10 to +70

D571-20A 108217068 2.0 mW 1550 nm SC-PC –40 to +85

D571-20F 108401217 2.0 mW 1550 nm FC-PC –40 to +85

D571-20N 108401233 2.0 mW 1550 nm none –40 to +85

D571-21A 108401241 2.0 mW 1550 nm SC-PC –10 to +70

D571-21F 108401266 2.0 mW 1550 nm SC-PC –10 to +70

D571-21N 108401282 2.0 mW 1550 nm none –10 to +70

D571C20A 108469743 2.0 mW 1510 nm SC-PC –40 to +85

D571C20F 108469768 2.0 mW 1510 nm FC-PC –40 to +85

D571C20N 108469784 2.0 mW 1510 nm none –40 to +85

D571C21A 108469792 2.0 mW 1510 nm SC-PC –10 to +70

D571C21F 108469818 2.0 mW 1510 nm FC-PC –10 to +70

D571C21N 108469834 2.0 mW 1510 nm none –10 to +70

D571-Type Digital 1.5 µm Uncooled DFB Advance Data Sheet

FastLight

Laser Module April 2000

For additional information, contact your Microelectronics Group Account Manager or the following:

INTERNET: http://www.lucent.com/micro, or for Optoelectronics information, http://www.lucent.com/micro/opto

E-MAIL: docmaster@micro.lucent.com

N. AMERICA: Microelectronics Group, Lucent Technologies Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18103

1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)

ASIA PACIFIC: Microelectronics Group, Lucent Technologies Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256

Tel. (65) 778 8833, FAX (65) 777 7495

CHINA: Microelectronics Group, Lucent Technologies (China) Co., Ltd., A-F2, 23/F, Zao Fong Universe Building, 1800 Zhong Shan Xi Road,

Shanghai 200233 P. R. China

Tel. (86) 21 6440 0468, ext. 316, FAX (86) 21 6440 0652

JAPAN: Microelectronics Group, Lucent Technologies Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan

Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700

EUROPE: Data Requests: MICROELECTRONICS GROUP DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148

Technical Inquiries: OPTOELECTRONICS MARKETING: (44) 1344 865 900 (Ascot UK)

Lucent Technologies Inc. reser ves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No

rights under any patent accompany the sale of any such product(s) or information.

FastLight

is a trademark of Lucent Technologies Inc.

April 2000

DS00-136OPTO (Replaces DS99-056LWP)