SPECIFICATION CONTROL DRAWING TITLE 100A0121 Date TWO CONDUCTOR CABLE, HALOGEN FREE, UNSHIELDED, UNJACKETED, 600 VOLT AC, 125C 2-9-09 Revision F This specification sheet forms a part of the latest issue of Raychem Specification WCD 2015. COMPONENT WIRES - 100A0111 CONSTRUCTION DETAILS DIAMETER PART NUMBER 1/ CONDUCTOR SIZE (AWG) LOWER SPEC LIMIT inches mm TARGET VALUE inches mm UPPER SPEC LIMIT inches mm MAXIMUM WEIGHT lbs/kft kg/km 100A0121-24-* 24 .086 2.19 .090 2.29 .094 2.39 4.96 7.39 100A0121-22-* 22 .099 2.51 .102 2.59 .105 2.66 6.88 10.25 100A0121-20-* 20 .115 2.93 .118 3.01 .121 3.08 10.26 15.29 100A0121-18-* 18 .133 3.38 .137 3.49 .141 3.59 15.06 22.44 100A0121-16-* 16 .145 3.68 .149 3.78 .153 3.88 18.94 28.22 100A0121-14-* 14 .179 4.54 .183 4.66 .188 4.78 29.77 44.35 100A0121-12-* 12 .213 5.41 .219 5.56 .225 5.72 43.32 64.54 100A0121-10-* 10 .262 6.66 .269 6.84 .276 7.02 68.54 102.13 CABLE RATINGS AND ADDITIONAL REQUIREMENTS INSULATION FLAWS: Impulse Dielectric Test, 8.0 kV (peak) PART NUMBER: The "*" in the part numbers above shall be replaced by color code designators with a slash separating the component wire colors. 1/ Example: AWG 22, black and brown component wires: 100A0121-22-0/1 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER, AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. The TE logo, Tyco Electronics and Raychem are trademarks. Page 1 of 1 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Raychem Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 (c) 2006-2009 Tyco Electronics Corporation. All rights reserved.