GC864QUH730-009 - Telit - Datasheet.Live

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Disclaimer

The information contained in this document is the proprietary information of

Telit Communications S.p.A.

Telit Communications S.p.A. makes every effort to ensure the quality of the information it makes

available. Notwithstanding the foregoing, Telit Communications S.p.A. does not make any warranty as

to the information contained herein, and does not accept any liability for any injury, loss or damage of

any kind incurred by use of, or reliance upon, the information.

Telit Communications S.p.A. disclaims any and all responsibility for the application of the devices

characterized in this document and notes that the application of the device must comply with the

safety standards of the applicable country and, where applicable, with the relevant wiring rules.

Telit Communications S.p.A. reserves the right to make modifications, additions and deletions to this

document at any time and without notice.

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

APPLICABLE PRODUCTS

PRODUCT OLD P/N

NEW P/N

(SW 7.03.xx0)

GT863

3990150471 3990150471

GT864

4990150070 4990150070

GM862

GPS

3990250689 GM862GPS730-003

GM862

UAD

3990250658 GM862PYT730-011

GM862

QUAD

3990250659 GM862QUD730-009

GC864

3990250676 GC864PYT730-011

GC864

QUAD

3990250675 GC864QUD730-009

GC864

w/ SIM holder

3990250705 GC864PYH730-011

GC864

QUAD w/ SIM holder

3990250704 GC864QUH730-009

864

3990250686 GC864PC2730-011

GC864

QUAD

3990250681 GC864QC2730-009

GE863

GPS

3990250690 GE863GPS730-003

GE863

3990250661 GE863PYT730-011

GE863

QUAD

3990250662 GE863QUD730-009

GE864

3990250650 GE864PYT730-011

GE864

QUAD

3990250648 GE864QUD730-009

GE864

AUTO

3990250701 GE864AUT730-004

GE863

PRO3

w/o OS

3990250691 GE863PR3730-012

GE863

PRO3 with

LINUX

3990250698 GE863PR3730-013

GE863

PRO3 64MB RAM

w/o OS

Not Applicable GE863PR3730-009

GE863

PRO3 64MB RAM with

LINUX

Not Applicable GE863PR3730-010

NOTE:

The applicability table shows only the products to which the document refers to.

To get information about the products influenced by “Enhancement”, “New

Feature” or “Bug Fixing”, please check the last column “Product affected” of the

table in the General Enhancement section.

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

1 Delta Software from 7.02.xx4 to 7.03.xx0

1.1 New Features

Description Notes

Operating voltage range has been extended to new

values as follows:

MIN: 3.22 V

MAX: 4.50 V

Telit Firmware Update Service feature

Python users are requested to check the behavior

of the application, since Python applications will be

limited to a file-system size of 2 MB as compared to

the existing 3 MB. This is due to the increase in the

size of the software to support Telit Firmware

Update Service capability.

Full AUTOBAND support.

With the new parameter 2, the module will use all the

four bands during idle scan and first network selection

Easy Gprs over CSD functionality.

Function can be activated using command

AT#GSMCONT

New Command AT#ICMP

This command enable/disable the ICMP feature of the

TCP stack

New Command AT#CACHEDNS

This command enable/disable the caching of DNS

translation. this can be used to avoid unuseful traffic if

the hostname is always the same

New Command AT#DNS

This command can be used to configured a static DNS

address not override by the DNS received by the

network during the activation of the Socket

New Command AT#NWSCANTMR

This command shall be used to change the Interval

between to cell selection if no network is available.

New Command AT$GPSPAR

This command can be used to reconfigure some

working parameter of the GPS receiver

New Command AT#TCPREASS

This command enable/disable the TCP reassembly

feature

New Command AT#ENHSIM

This command enable/disable the fast SIM Access.

Data transfer throughput will increase if the SIM

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

support F372 and D1 speed

New Command AT#TSVOL

Used to configure the volume of the signaling tone

New TCP data in command mode feature.

Command added are: AT#SSEND,AT#SRECV

TCP KeepAlive feature added

This feature can be enabled/disabled using a

parameter of command #SCFGEXT

New Command

AT#UDTSET,AT#UDTRST,AT#UDTSAV.

This commands allow the customer to define a set of

the three frequencies and amplitudes for generation of

custom tones,

New Command AT#SIMDET

This command can be used to ignore the CCIN pin and

force sim precence by software

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

1.2 General Enhancements

Enh. : Enhancement

New : New Feature

Fix : Bug Fixing

Type Description Product

affected

Fix

Improvement on the handing of IMSI Attach and Normal Location Updating

procedures during a network registration, according to SIM Card and selection

parameters (3GPP TS 24.008)

ALL

Fix

Character set 8859-1 conversion

table: GSM char 0x0F was converted to

“yen” instead to “å”

ALL

Fix

Improvement on the handling of the DNS set by AT#DNS after

AT+CGDCONT

ALL

Fix

Fix on encoding/decoding of 0xFF TON/NPI in phonebook SS strings like *#21#

ALL

Fix

AT#CSURVC with AT#CSURVEXT=2

ALL

Fix

When a ringtone is generated with AT#SRS on one CMUX instance while

AT#SKTD is executed on another CMUX instance , the ringtone is played after

AT#SKTD result code (CONNECT or ERROR), and with a different melody and

time-out

ALL

Fix

Alignment of AT#CGPADDR to AT+CGPADDR in case of no cid defined

ALL

Fix

AT#SRECV doesn't show 0x00 character

ALL

Fix

Connection negotiation handling using WinFax

ALL

Enh

Updated the list of PLMN names according to AT&T requirements

ALL

Fix

#RSEN command improvement

ALL

Fix

Handling of text sms including carriage return improvement

ALL

New

Enabled DigitalAudioInterface DVI

GM862-QUAD

GM862_PY

Fix

(SPECS) AT+CSMS doen't work properly

ALL

Enh

ens = 1 now don’t change the #SMSMODE setting

ALL

Enh

AT+CGDCONT=<cid> on active context handling improvement

ALL

Fix

The firewall was not cleared in case of connection timeout.

ALL

Fix

AT#V24CFG=? Answer was #V24CFG: (0-3),(0-1).

Now it has been substituted by ....,(0,1) to make it equal to the other at comands’

answers

ALL

Fix

Python Memory handling when reading files bigger than 8192

PY products

Fix

Fix on sending PDU SMS if length is different from written bytes

ALL

Fix

Fix on at#sl=1,0 on suspended socket

ALL

Fix

Fix on at#sgact=1,0 during a voice call

ALL

Fix

Improvement on the handling of remote hung up of pending call before it was

accepted

ALL

Fix

AT#SD with a socket in LISTEN

ALL

Fix

Fix on AT#SS syntax ALL

Fix

Missing NO CARRIER unsolicited after remote socket closure when CD high ALL

Fix

Immediate NO CARRIER on data transfer if packet size PKTSZ=1500 for UDP ALL

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Type Description Product

affected

connections

Fix

Unsolicited message to AT#SL command was “#SKTL: aborted” instead of “#SL:

aborted” ALL

Fix

Data inserted with AT#USERID and AT#PASSW commands where overwritten

by AT#SCFG ALL

Fix

Improvement on the indication of CGREG (AT#REGMODE=1) in some cases: at

power on when the class is CG, when the antenna is removed

ALL

Fix

AT#DSCRIPT command improvement

PY and GPS

products

Fix

+CSQ and #MONI not updated during a CSD call

ALL

Fix

AT+CFUN=4 not properly stored in NVM

ALL

Fix

Improvements on the echo canceller.

ALL

Fix

Sidetone active while ringing: sidetone and microphone were activated at the

beginnig of call during ringing, now only speaker is activated.

Sidetone/Microphone are activated at the end of ringing.

ALL

Fix

+CSQ and #MONI update during a call

ALL

Fix

Storing of AT+CFUN=4 in NVM

ALL

Fix

AT+CMER: Call indicator ALL

Fix

Improvement in UDP closure ALL

Fix

Improvement in DNS resolve ALL

Fix

Corrected the visualization of the date in the NITZ unsolicited when time zone is

such to change day and/or month and/or year ALL

Fix

AT&S1 improvement ALL

Fix

Improvement on AT#SEMAIL behavior if PDP context is with username and

password ALL

Fix

Improvement on AT+COPS=3,1 in selint=0, copsmode=0 ALL

AT#STM=? Coammnd answer improvement ALL

Fix

Incoming call disconnected by calling party before being automatically answered

(ATS0=2), sometimes wasn’t saved in the missed calls list ALL

Fix

Improvement on network survey management with AT#CSURVEXT=1 or

AT#CSURVEXT=2 in the following situations:

- class C mobile station (MS) in circuit switched only mode (GSM only);

- MS using a SIM Card with a not inserted PIN;

MS working without a SIM Card.

ALL

Fix

Improvement in multisocket in case of remote closure ALL

Fix

DSR didn’t change its state during a voice call while AT&S1 and AT&S2 were

set. Fix made only for SELINT=0 and SELINT=1. ALL

Fix

Now after the CONNECT message module can enter powersaving mode ALL

Fix

Improvement on AT+CRSM command output if parameter <comand> is incorrect ALL

Fix

Improvement in the handling of contemporaneous management of a network

search (AT+COPS=?) and a network survey (AT#CSURV) using CMUX features ALL

Fix

concatenated 16 bit Message Reference SMS ALL

Fix

Improvement of the AT+CCLK? output at first power on. ALL

Fix

Sometimes the date didn’t appear in +CMGL command for class 0 SMS ALL

Fix

Improvement in DTR low condition handling during fax call ALL

Fix

Improvement on +CMT with SMS UCS2 and bit udhi = 1 ALL

Fix

Improvement in Multisoket Listen ALL

Enh

Imrovement on FTP to avoid that a delay in the answer to a command be ALL

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Type Description Product

affected

extended to next commands

Enh

Improvement on FTP for responses after timeout ALL

New

With SMSMODE=1 the concatenated SMS are sent with 16 bit message

reference ALL

Fix

‘+++’ escape sequence and abort were not handled properly in fax call ALL

Fix

If AT#GAUTH=3 and the Auth Protocol suggested by the host is not supported by

the module, the module suggests PAP ALL

Fix

AT commands AT#USERID and AT#PASSWD Username and password weren’t

properly handled when CMUX ports > 0 and old IPeasy commands. Now, the

username e pwd are the same for all the sockets associated to a cid.

ALL

New

AT$GPSx optimization GE863_GPS

GM862_GPS

Fix

Echo improvements on serial port handling ALL

Fix

Improvement on AT$GPSS command switching off the module GE863_GPS

GM862_GPS

Fix

Corrected answer to AT+IPR=? ALL

Fix

Improvement on the power saving mode handling after rceveing CONNECT

message ALL

Fix

Fix for double OK in AT+CPOL command ALL

Fix

When ATA is issued after RING which comes from a DATA call, the module

stays in command mode (e.g. you can even issue ATH in that moment and

connection will be dropped).

ALL

Fix

Bug fixing for MDM.send('+++',0) followed by MDM.receive(100)

PYand GPS

products

Fix

Allowed values of speed for CBST command do not include 8 (the

AT+CBST=8,0,x setting shall return ERROR) ALL

Fix

Improvement on CSD call con Vodafone DE ALL

Fix

Improvements in multisocket ALL

Fix

Fix on Event Download management: the Location Status is required afterwards

a registration or a cell reselection regardless of Network Operation Mode (NOM) ALL

Fix

Fix on Operator Name management (Cingular requirements): if Country Initials

(CI) element in Network Name IE is enabled, the MS has to include the CI (and

separator) to the text string. In particular, for the MCC range 310-316, the

Country Initials "US" instead of "USA" must be used

ALL

Fix

Added missed storing of last connection end cause after ATH ALL

Fix

Corrected AT+CSDH=<CR> behaviour: command answer is still OK but

parameter is not changed ALL

Fix

Improvement for USSD error indication when SS error indication is received from

network in response to AT+CUSD command ALL

Enh

Linger time FTP: socket closure behaviour ALL

Enh

NVM space reduced to 2MB

PY and GPS

New

New AT command AT#ICMP ALL

New

Added support for Explicit Call Transfer (ECT) ALL

New

AT$GPSPAR GE863_GPS

GM862_GPS

New

Execution command for AT#NWSCANTMR

ALL

Fix

Improvement in FDN enabling/disabling when CPBS phonebook at power on is

LD, MC or RC. ALL

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Type Description Product

affected

Fix

SMS written without destination address: CMGR and CMGL show 129 as type of

number instead of empty ALL

New

New AT Command AT#CACHEDNS hidden to the user ALL

New

New AT Command AT#DNS hidden to the user used to set DNS manually ALL

New

New AT Command AT#TCPREASS to activate TCP reassembly features ALL

Fix

Improvement in AT+CUSD mobile originated USSD transaction ALL

New

Command to set the volume for a class of tones AT#TSVOL ALL

Fix

TCP closure improvement ALL

Fix

Fix on CSNS/CBST

Default data service for CSNS always updated when valid after a CBST

command not only when three parameters are present. Added values 1,2, 3 in

CSNS settings.

ALL

Fix

Fix on flow control for ATD*99#, +++ sequence. ALL

Fix

Improvement on FTP open ALL

Fix

SMS class 0 visualization of parameter <fo> and <alpha> in command

AT+CMGR and AT+CMGL ALL

Fix

Fix for missed AT#PCT counter decrement after wrong PIN2 insertion. ALL

Fix

The output format from an unsolicited cell broadcast message in PDU mode

(AT+CGMF=0) was not in accordance with ETSI specifications (PDU length and

<CR><LF> missing):

+CBM: <PDU length><CR><LF><PDU>

<PDU length><CR><LF> have been added for SELINT=2.

ALL

Enh

IPGSM improvements ALL

Enh

Extension of the command AT#GAUTH to IPGSM case ALL

New

AT#SCFGEXT command ALL

New

Keep alive implementation ALL

New

Full AutoBand for Quad Band Support ALL

Enh

AT#STM

In old command not all the tones were muted.

It has been added the new mode ( 2 ) to disable all tones generation, included

signalling and connected tones

ALL

Enh

Added parameters to AT#TONE command in order to allow the generation of

tones defined by the command AT#UDTSET ALL

New

New AT commands for TONE generation:

AT#UDTSET: set the three frequencies and amplitudes for generation of custom

tones

AT#UDTRST: resets factory defaults for tones

AT#UDTSAV: save the current settings in non volatile memory

ALL

Fix

Data call & ctx gprs. Improvement on the behaviour with AT#GPRS=1 when

AT#GPRS=0 is issued during a data call in suspend state (after +++) ALL

Flow control after AT#SO=x. The flow control is now disabled when the command

mode state is entered ALL

Fix

New response for #SELINT=2 on AT+CGQMIN=? and AT+CGQREQ=? ALL

New

AT#NWSCANTMR to set the NW scan timer when the module is without ALL

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

Type Description Product

affected

coverage

Fix

Mobile Terminated CSD calls management improvement ALL

Delta SW version 7.02.xx4 - 7.03.xx0

30273NT10767a Rev. 5 - 14/07/08

2 Document Change Log

ISSUE#0 07/07/06 Release First ISSUE# 0 - Delta Software from 7.01.x04 to 7.02.x00

ISSUE#1 11/08/06 Delta Software from 7.02.x00 to 7.02.x01

ISSUE#2 18/10/06 Delta Software from 7.02.x01 to 7.02.x02

ISSUE#3 15/03/07 Delta Software from 7.02.x02 to 7.02.x03

ISSUE#4 09/11/07 Delta Software from 7.02.x03 to 7.02.x04

ISSUE#5 14/07/08 Delta Software from 7.02.xx4 to 7.03.xx0