2N6348A - ON Semiconductor

May, 2006 − Rev. 4 1Publication Order Number:

2N6344A/D

2N6344A, 2N6348A,

2N6349A

Preferred Device

Triacs

Silicon Bidirectional Thyristors

Designed primarily for full-wave AC control applications, such as

light dimmers, motor controls, heating controls and power supplies; or

wherever full-wave silicon gate controlled solid-state devices are

needed. Triac type thyristors switch from a blocking to a conducting

state for either polarity of applied anode voltage with positive or

negative gate triggering.

Features

•Blocking Voltage to 800 V

•All Diffused and Glass Passivated Junctions for Greater Parameter

Uniformity and Stability

•Small, Rugged, Thermowatt Construction for Low Thermal

Resistance, High Heat Dissipation and Durability

•Gate Triggering Guaranteed in all Four Quadrants

•For 400 Hz Operation, Consult Factory

•8.0 A Devices Available as 2N6344 thru 2N6349

•Pb−Free Packages are Available*

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

TRIACS

12 AMPERES RMS

600 thru 800 VOLTS

TO−220AB

CASE 221A

STYLE 4

123

PIN ASSIGNMENT

3 Gate

Main Terminal 1

Main Terminal 2

4Main Terminal 2

MT1

MT2

Preferred devices are recommended choices for future use

and best overall value.

http://onsemi.com

See detailed ordering and shipping information in the package

dimensions section on page 2 of this data sheet.

ORDERING INFORMATION

2N634xAG

AYWW

2N634xA = Device Code

x = 4, 8, or 9

A = Assembly Location

Y = Year

WW = Work Week

G = Pb−Free Package

MARKING

DIAGRAM

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

MAXIMUM RATINGS

Characteristics Symbol Value Unit

*Peak Repetitive Off−State Voltage (Note 1)

(Gate Open, TJ = −40 to +110°C, Sine Wave 50 to 60 Hz, Gate Open) 2N6344A, 2N6348A

2N6349A

VDRM,

VRRM 600

800

*On−State RMS Current (Full Cycle Sine Wave 50 to 60 Hz) (TC = +80°C)

(TC = +95°C)

IT(RMS) 12

6.0

*Peak Non−repetitive Surge Current (One Full Cycle, 60 Hz, TC = +80°C)

Preceded and followed by rated current ITSM 100 A

Circuit Fusing Consideration (t = 8.3 ms) I2t 59 A2s

*Peak Gate Power (TC = +80°C, Pulse Width = 2.0 ms) PGM 20 W

*Average Gate Power (TC = +80°C, t = 8.3 ms) PG(AV) 0.5 W

*Peak Gate Current (Pulse Width = 2.0 ms; TC = +80°C) IGM 2.0 A

*Peak Gate Voltage (Pulse Width = 2.0 ms; TC = +80°C) VGM "10 V

*Operating Junction Temperature Range TJ−40 to +125 °C

*Storage Temperature Range Tstg −40 to +150 °C

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the

Recommended O p e r a t i n g Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect

device reliability.

*Indicates JEDEC Registered Data.

1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such

that the voltage ratings of the devices are exceeded.

THERMAL CHARACTERISTICS

Characteristic Symbol Max Unit

*Thermal Resistance, Junction−to−Case RqJC 2.0 °C/W

Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds TL260 °C

ORDERING INFORMATION

Device Package Shipping

2N6344A TO−220AB

500 Units / Box

2N6344AG TO−220AB

(Pb−Free)

2N6348A TO−220AB

2N6348AG TO−220AB

(Pb−Free)

2N6349A TO−220AB

2N6349AG TO−220AB

(Pb−Free)

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted; Electricals apply in either direction)

Characteristic Symbol Min Typ Max Unit

OFF CHARACTERISTICS

*Peak Repetitive Blocking Current

(VD = Rated VDRM, VRRM; Gate Open) TJ = 25°C

TJ = 110°C

IDRM,

IRRM −

−−

−10

2.0 mA

ON CHARACTERISTICS

*Peak On-State Voltage

(ITM = "17 A Peak; Pulse Width = 1 to 2 ms, Duty Cycle p 2%) VTM − 1.3 1.75 V

Gate Trigger Current (Continuous dc)

(VD = 12 Vdc, RL = 100 W)

Quadrant I: MT2(+), G(+) All

Quadrant II: MT2(+), G(−) 2N6348A and 2N6349A only

Quadrant III: MT2(−), G(−) All

Quadrant IV: MT2(−), G(+) 2N6348A and 2N6349A only

*MT2(+), G(+); MT2(−), G(−) TC = −40°C

*MT2(+), G(−); MT2(−), G(+) TC = −40°C

IGT

−

6.0

−

100

125

Gate Trigger Voltage (Continuous dc)

(VD = 12 Vdc, RL = 100 W)

Quadrant I: MT2(+), G(+) All

Quadrant II: MT2(+), G(−) 2N6348A and 2N6349A only

Quadrant III: MT2(−), G(−) All

Quadrant IV: MT2(−), G(+) 2N6348A and 2N6349A only

*MT2(+), G(+); MT2(−), G(−) TC = −40°C

*MT2(+), G(−); MT2(−), G(+) TC = −40°C

VGT

−

0.9

1.1

1.4

−

2.0

2.5

2.0

2.5

3.0

Gate Non−T rigger Voltage (VD = Rated VDRM, RL = 10 k W, TJ = 110°C)

*MT2(+), G(+); MT2(−), G(−); MT2(+), G(−); MT2(−), G(+) VGD 0.2 − − V

Holding Current

(VD = 12 Vdc, Gate Open) TC = 25°C

Initiating Current = "200 mA *TC = −40°C

IH−

−6.0

−40

*Turn-On Time

(VD = Rated VDRM, ITM = 17 A, IGT = 120 mA,

Rise Time = 0.1 ms, Pulse Width = 2 ms)

tgt − 1.5 2.0 ms

DYNAMIC CHARACTERISTICS

Critical Rate of Rise of Commutation Voltage

(VD = Rated VDRM, ITM = 17 A, Commutating di/dt = 6.1 A/ms,

Gate Unenergized, TC = 80°C)

dv/dt(c) − 5.0 − V/ms

*Indicates JEDEC Registered Data.

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

+ Current

+ Voltage

VTM

Symbol Parameter

VDRM Peak Repetitive Forward Off State Voltage

IDRM Peak Forward Blocking Current

VRRM Peak Repetitive Reverse Off State Voltage

IRRM Peak Reverse Blocking Current

Voltage Current Characteristic of Triacs

(Bidirectional Device)

IDRM at VDRM

on state

off state

IRRM at VRRM

Quadrant 1

MainTerminal 2 +

Quadrant 3

MainTerminal 2 − VTM

VTM Maximum On State Voltage

IHHolding Current

MT1

(+) IGT

GATE

(+) MT2

REF

MT1

(−) IGT

GATE

(+) MT2

REF

MT1

(+) IGT

GATE

(−) MT2

REF

MT1

(−) IGT

GATE

(−) MT2

REF

−

MT2 NEGATIVE

(Negative Half Cycle)

MT2 POSITIVE

(Positive Half Cycle)

Quadrant III Quadrant IV

Quadrant II Quadrant I

Quadrant Definitions for a Triac

IGT −+ IGT

All polarities are referenced to MT1.

With in−phase signals (using standard AC lines) quadrants I and III are used.

2N6348A

2N6349A

2N6348A

2N6349A

All

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

100

110

1412108.06.04.02.0

30°

IT(RMS), RMS ON-STATE CURRENT, (AMP)

120°

180°

90°

α = CONDUCTION ANGLE

60°

T , CASE TEMPERATURE ( C)°

4.0

IT(RMS), RMS ON-STATE CURRENT (AMP)

8.0

2.0 4.0 6.0 8.0 10 12 14

TJ = 110°C

α = CONDUCTION ANGLE

α = 30°

180°

120°

90°

P , AVERAGE POWER (WATTS)

Figure 1. RMS Current Derating Figure 2. On−State Power Dissipation

QUADRANTS

QUADRANT 4

−60 20−20 0 40 60 80 100 120 140

TJ, JUNCTION TEMPERATURE (°C)

0.4

−40

0.6

0.8

1.0

1.2

1.4

1.6

1.8 50

7.0

5.0 140120100806040200−20−40−60

TJ, JUNCTION TEMPERATURE (°C)

VD = 12 V

V , GATE TRIGGER VOLTAGE (VOLTS)

QUADRANT

I , GATE TRIGGER CURRENT (mA)

Figure 3. Typical Gate Trigger Voltage Figure 4. Typical Gate Trigger Current

VD = 12 V

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

TJ = 100°C

f = 60 Hz

1.0

2.0 3.0 5.0 7.0 10

NUMBER OF CYCLES

CYCLE

100

TJ = 100°C

0.5

0.7

1.0

0.1

25°C

vTM, MAXIMUM INSTANTANEOUS ON-STATE VOLTAGE (VOLTS)

−40

0.80.4 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4

0.2

0.3

−60 −20 200 40 10080 140

TJ, JUNCTION TEMPERATURE (°C)

12060

MAIN TERMINAL #2

POSITIVE

2.0

7.0

5.0

3.0

5.0

7.0

2.0

100

GATE OPEN

MAIN TERMINAL #1

POSITIVE

i , INSTANTANEOUS ON-STATE CURRENT (AMP)

ITSM I , HOLDING CURRENT (mA)

Surge is preceded and followed by rated current

, PEAK SURGE CURRENT (AMP)

Figure 5. On−State Characteristics

Figure 6. Typical Holding Current

Figure 7. Maximum Non−Repetitive

Surge Current

r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)

Figure 8. Typical Thermal Response

2.0 k 10 k20 5.0 k1.0 k500200100505.02.01.00.50.2

ZqJC(t) = r(t) • RqJC

0.02

0.05

0.2

0.1

0.5

1.0

t,TIME (ms)

0.1

0.01

2N6344A, 2N6348A, 2N6349A

http://onsemi.com

PACKAGE DIMENSIONS

STYLE 4:

PIN 1. MAIN TERMINAL 1

2. MAIN TERMINAL 2

3. GATE

4. MAIN TERMINAL 2

TO−220AB

CASE 221A−07

ISSUE AA

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. DIMENSION Z DEFINES A ZONE WHERE ALL

BODY AND LEAD IRREGULARITIES ARE

ALLOWED.

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.570 0.620 14.48 15.75

B0.380 0.405 9.66 10.28

C0.160 0.190 4.07 4.82

D0.025 0.035 0.64 0.88

F0.142 0.147 3.61 3.73

G0.095 0.105 2.42 2.66

H0.110 0.155 2.80 3.93

J0.014 0.022 0.36 0.55

K0.500 0.562 12.70 14.27

L0.045 0.060 1.15 1.52

N0.190 0.210 4.83 5.33

Q0.100 0.120 2.54 3.04

R0.080 0.110 2.04 2.79

S0.045 0.055 1.15 1.39

T0.235 0.255 5.97 6.47

U0.000 0.050 0.00 1.27

V0.045 −−− 1.15 −−−

Z−−− 0.080 −−− 2.04

123

−T− SEATING

PLANE

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, af filiates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5773−3850

2N6344A/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative