Data Sheet Customer Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 27-Apr-20 Edition : REV.F VIKING TECH CORPORATION VIKING TECH CORPORATION KAOHSIUNG BRANCH Viking Electronics (WUXI) () No.70, Guangfu N. Rad., Hsin Chu Industrial Park, Hukou Hsiang, Hsin Chu Hsien, 303, Taiwan TEL:886-3-5972931 FAX:886-3-5972935*886-3-5973494 E-mail:sales@viking.com.tw No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, Taiwan No.1A,(Xixia Road),Machinery & Industry Park, National Hi-Tech Industrial Development Zone of Wuxi, Wuxi, Jiangsu Province, China Zip Code:214028 TEL:86-510-85203339 FAX:86-510-85203667*86-510-85203977 E-mail:wuxisales@tmtec.com.tw TEL:886-7-8217999 FAX:886-7-8228229 E-mail:sales@viking.com.tw Produced by (QC) Checked (QC) Approved by (QC) 27-Apr-20 27-Apr-20 27-Apr-20 Chun Ben Chang Ben Chang Prepared by (Sales) 27-Apr-20 CO., LTD. Accepted by (Customer) AR Series Thin Film Precision Chip Resistor Thin Film Precision Chip Resistor (AR Series) Features Advanced thin film technology Very tight tolerance down to 0.01% Extremely low TCR down to 1PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Applications Medical Equipment Testing / Measurement Equipment Printer Equipment Automatic Equipment Controller Converters Communication Device, Cell Phone, GPS, PDA Construction L D1 W T D2 Alumina Substrate Bottom Electrode Top Electrode Edge Electrode Barrier Layer External Electrode Resistor Layer Overcoat Marking Dimensions Unit: mm Type Size (Inch) L W T D1 D2 AR01 AR02 AR03 AR05 AR06 AR13 AR10 AR10(1/2W) AR12 AR12(1W) 0201 0402 0603 0805 1206 1210 2010 2010(1/2W) 2512 2512(1W) 0.580.05 1.000.05 1.550.10 2.000.15 3.050.15 3.100.15 4.900.15 4.900.15 6.300.15 6.300.15 0.290.05 0.500.05 0.800.10 1.250.15 1.550.15 2.400.15 2.400.15 2.400.15 3.100.15 3.100.15 0.230.05 0.300.05 0.450.10 0.550.10 0.550.10 0.550.10 0.550.10 0.550.10 0.550.10 0.550.10 0.120.05 0.200.10 0.300.20 0.300.20 0.420.20 0.400.20 0.600.30 0.600.30 0.600.30 0.600.30 0.150.05 0.200.10 0.300.20 0.400.20 0.350.25 0.550.25 0.500.25 2.200.25 0.500.25 2.500.25 Weight (g) (1000pcs) 0.14 0.54 1.83 4.71 9.02 10 23.61 26.68 38.06 44.65 Part Numbering AR 03 T T B Y 1001 N Product Type Dimensions (LxW) Resistance Tolerance Packaging Code TCR (PPM/C) Power Rating Resistance Marking Code 01: 0201 02: 0402 03: 0603 05: 0805 06: 1206 13: 1210 10: 2010 12: 2512 T: 0.01% A: 0.05% B: 0.1% C: 0.25% D: 0.5% F: 1% www.viking.com.tw T: Taping Reel B: Bulk 5: 1 X: 2 O:3 S: 5 B: 10 N: 15 C: 25 D: 50 : Standard N: 1/20W Y: 1/16W X: 1/10W W: 1/8W M: 1/6W P: 1/5W V: 1/4W O: 1/3W U: 1/2W Q: 3/4W T: 1W For detail questions, contact : sales@viking.com.tw 1 0010: 1 4R70: 4.7 1001: 1K 1004: 1M : Standard Marking for E96 / E24 N: No Marking Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor Derating Curve Derating Curve Power ratio(%) . 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 Ambient Temperature() Standard Electrical Specifications Item Type Power Rating at 70C Operating Temp. Range AR01 (0201) 1/32W -55 ~ +155C 15V 30V AR02 (0402) 1/16W -55 ~ +155C 50V 100V 49.9 - 12K AR03 (0603) 1/16W -55 ~ +155C 50V 100V AR05 (0805) 1/10W -55 ~ +155C 100V -55 ~ +155C -55 ~ +155C AR06 (1206) 1/8W AR13 (1210) 1/4W AR10 (2010) 1/4W AR12 (2512) 1/2W Max. Max. Operating Overload Voltage Voltage Resistance Range 0.05% 0.1% 0.25% 0.5% 1% TCR (PPM/C) 49.9 - 75K 25,50 4 - 511K 25,50 4.7 -332K 1 - 1M 25,50 200V 4.7 -1M 1 - 2M 25,50 150V 300V 4.7 - 1M 1 - 2.5M 25,50 150V 300V 4.7 - 1M 1 - 3M 25,50 Lower Resistance:1~10 Special Electrical Specifications Item Type Power Rating at 70C Operating Temp. Range Max. Operating Voltage Max. Overload Voltage Resistance Range 0.01% 0.05% 0.1% 0.25% 0.5% 49.9 - 4.99K AR02 (0402) 1/16W -55 ~ +155C 50V 49.9 - 20K 100V 49.9 - 20K AR03 (0603) AR05 (0805) AR06 (1206) AR13 (1210) AR10 (2010) AR12 (2512) 1/16W 1/10W 1/8W 1/ 4W 1/4W 1/2W -55 ~ +155C -55 ~ +155C -55 ~ +155C -55 ~ +155C -55 ~ +155C -55 ~ +155C 50V 100V 150V 150V 150V 150V 100V 200V 300V 24.9 - 60K 24.9 - 4.74.7 - 511K 100K 332K 24.9 - 30K 24.9 - 150K 24.9 4.7 - 1M 200K 24.9 - 49.9K 24.9 - 300K 24.9 499K 24.9 - 49.9K 300V 24.9 - 300K 300V 4.7 - 1M For detail questions, contact : sales@viking.com.tw 2 1, 2,3 10, 15 1, 2,3 5 10, 15 1, 2,3 5 10, 15 1, 2,3 5 10, 15 24.9 4.7 - 1M 499K 24.9 - 100K 24.9 - 300K 24.9 4.7 - 1M 499K 24.9 - 100K 24.9 499K www.viking.com.tw 4.7 - 1.5M 24.9 - 300K 300V TCR (PPM/C) 5 49.9 - 100K 24.9 - 15K 1% 1, 2,3 5 10, 15 1, 2,3 5 10, 15 1, 2,3 5 10, 15 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor High Power Rating Electrical Specifications Item Type AR01 (0201) Power Rating at 70C Operating Temp. Range 1/20W -55 ~ +155C Max. Max. Operating Overload Voltage Voltage 25V Resistance Range 0.01% 0.05% 0.1% 0.25% 0.5% 50V 5K - 75K 25,50 1, 2,3 49.9 - 4.99K 49.9 - 20K AR02 (0402) 1/10W -55 ~ +155C 50V 100V 49.9 - 12K 49.9 - 12K 5 49.9 - 100K 10, 15 4.7~255K 25,50 24.9 - 15K 24.9 - 60K AR03 (0603) 1/10W -55 ~ +155C 75V -55 ~ +155C 100V 5 150V 4.7 - 511K 10,15 1 -1M 25,50 4.7 - 332K 10 - 332K 25,50 24.9 - 30K 24.9 -150K AR05 (0805) 1/8W -55 ~ +155C 150V 300V 24.9 200K 1/4W -55 ~ +155C 150V 300V 1/4W 1/3W -55 ~ +155C -55 ~ +155C 200V 200V 4.7 -1M 10, 15 1 - 1M 25,50 4.7 -511K 10 - 499K 1/ 3W -55 ~ +155C 200V 24.9 499K 1 - 1M 25,50 10 ~1M 25,50 24.9 - 300K -55 ~ +155C 200V 10,15 25,50 24.9 - 49.9K 24.9 - 300K 400V 1, 2,3 5 4.7 - 1M 1 - 1M 24.9 499K 1, 2,3 5 4.7 - 1M 1 - 1M 24.9 499K 1/3W 5 10,15 400V AR10(2010) 1, 2,3 4.7 - 1M 24.9 - 49.9K AR13 (1210) 25,50 24.9 - 300K 400V 400V 1, 2,3 5 24.9 - 49.9K AR06 (1206) 1, 2,3 150V 24.9 100K 1/6W 1% TCR (PPM/C) 10,15 25,50 1/2W -55 ~ +155C 200V 400V 24.9 - 2K 4.7 -1M 1 -1M 10,15,25,50 3/4W -55 ~ +155C 200V 400V 24.9 - 2K 4.7 - 2K 1 - 2K 10,15,25,50 1W -55 ~ +155C 200V 400V 24.9 - 2K 4.7 -1M 1 -1M 10,15,25,50 AR12(2512) Operating Voltage=(P*R) or Max. operating voltage listed above, whichever is lower. Overload Voltage=2.5*(P*R) or Max. overload voltage listed above, whichever is lower. Viking is capable of manufacturing the optional spec based on customer's requirement. (Lower Resistance:1~10 ; High Power Rating) www.viking.com.tw For detail questions, contact : sales@viking.com.tw 3 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor Environmental Characteristics Requirement Item Test Method Tol. 0.05% Tol. > 0.05% MIL-STD-202 Method 304 +25/-55/+25/+125/+25C Temperature Coefficient of Resistance As Spec. (T.C.R.) R0.05% Short Time Overload JIS-C-5201-1 4.13 RCWV*2.5 or Max. overload voltage whichever is lower for 5 seconds MIL-STD-202 Method 302 Apply 100VDC for 1 minute R0.2% R0.2% for high power rating >9999 M Insulation Resistance R0.05% R0.2% MIL-STD-202 Method 108A 702C, RCWV for 1000 hrs with 1.5 hrs "ON" and 0.5 hrs "OFF" R0.5% for high power rating Endurance 0201: >7k R0.5% 7kR0.2% R0.05% Damp Heat with Load R0.1% MIL-STD-202 Method 103B 402C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs "ON" and 0.5 hrs "OFF" JIS-C-5201-1 4.33 Bending amplitude 3 mm for 10 seconds 2010 2512 sizes: 2 mm Other sizes: 3 mm MIL-STD-202 Method 208H 2455C for 3 seconds R0.1% MIL-STD-202 Method 210E 2605C for 10 seconds R0.3% R0.5% for high power rating Bending Strength R0.05% Solderability 95% min. coverage Resistance to Soldering Heat R0.05% Dielectric Withstand Voltage By Type R0.05% Low Temperature Operation MIL-STD-202 Method 301 Max. overload voltage for 1 minute R0.2% JIS-C-5201-1 4.36 1 hour, -65C, followed by 45 minutes of RCWV R0.5% for high power rating MIL-STD-202 Method 108 at +155C for 1000 hrs R0.5% High Temperature Exposure RCWV(Rated continuous working voltage)= (P*R) or Max. Operating voltage whichever is lower Storage Temperature: 15~28C; Humidity < 80%RH Soldering Condition IR Reflow Soldering Wave Soldering (Flow Soldering) (1) Time of IR reflow soldering at maximum temperature point 260C10s (2) Time of wave soldering at maximum temperature point 260C10s (3) Time of soldering iron at maximum temperature point 410C5s www.viking.com.tw For detail questions, contact : sales@viking.com.tw 4 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor Marking 0603 3digit marking 3digit marking for Example: 14C=13K7 14C 68B=4K99 13C=13K3 68X=49.9 Marking Table Code E96 Code E96 Code E96 Code E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Example: 101=100 102=1K 0603 3digit marking for E24 E24 10 11 12 0805~2512 4digit marking www.viking.com.tw 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 Example Resistance 100 2.2K 10K 49.9K 100K marking 1000 2201 1002 4992 1003 For detail questions, contact : sales@viking.com.tw 5 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor Packaging Packing Quantity & Reel Specifications Type OA OB Unit :mm OC W T Paper Tape (EA) Emboss Plastic Tape (EA) AR01 178.01.0 60.0+1.0 13.50.7 9.51.0 11.51.0 10,000 - AR02 178.01.0 60.0+1.0 13.50.7 9.51.0 11.51.0 10,000 - AR03 178.01.0 60.0+1.0 13.50.7 9.51.0 11.51.0 5,000 - AR05 178.01.0 60.0+1.0 13.50.7 9.51.0 11.51.0 5,000 - AR06 178.01.0 60.0+1.0 13.50.7 9.51.0 11.51.0 5,000 - AR13 178.01.0 60.01.0 13.50.7 9.51.0 11.51.0 5,000 - AR10 178.01.0 60.0+1.0 13.50.7 13.51.0 15.51.0 - 4,000 AR12 178.01.0 60.0+1.0 13.50.7 13.51.0 15.51.0 - 4,000 Paper Tape Specifications Bottom Tape Top Tape D0 E A F B T P1 Resistor Paper Tape P0 P2 W direction of unreeling Unit: mm Type A B W E F P0 P1 P2 D0 T AR01 0.400.05 0.700.05 8.000.10 1.750.05 3.50.05 4.000.10 2.000.05 2.000.05 1.550.03 0.420.02 AR02 0.700.05 1.160.05 8.000.10 1.750.05 3.50.05 4.000.10 2.000.05 2.000.05 1.550.05 0.400.03 AR03 1.100.05 1.900.05 8.000.10 1.750.05 3.50.05 4.000.10 4.000.10 2.000.05 1.550.05 0.600.03 AR05 1.600.05 2.370.05 8.000.10 1.750.05 3.50.05 4.000.10 4.000.10 2.000.05 1.550.05 0.750.05 AR06 2.000.05 3.550.05 8.000.10 1.750.05 3.50.05 4.000.10 4.000.10 2.000.05 1.550.05 0.750.05 AR13 2.750.05 3.400.05 8.000.10 1.750.05 3.50.05 4.000.05 4.000.10 2.000.05 1.600.10 0.750.05 Peel force of top cover tape The peel speed shall be about 300mm/min5% The peel force of top cover tape shall be between 8gf to 60gf www.viking.com.tw For detail questions, contact : sales@viking.com.tw 6 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor Emboss Plastic Tape Specifications Top Tape D0 E A F B W D1 1.4Min. T P1 Resistor P2 P0 direction of unreeling Emboss Tape Unit: mm Type A B W E F P0 P1 P2 OD0 T AR10 2.850.10 5.450.10 12.00.10 1.750.10 5.50.05 4.000.05 4.000.10 2.000.05 1.50+0.10 1.000.20 AR12 3.400.10 6.650.10 12.00.10 1.750.10 5.50.05 4.000.05 4.000.10 2.000.05 1.50+0.10 1.000.20 Peel force of top cover tape The peel speed shall be about 300mm/min5% The peel force of top cover tape shall be between 20gf to 80gf Recommend Land Pattern Unit: mm C B www.viking.com.tw A Type A B C AR01 0.25 0.30 0.400.2 AR02 0.50 0.50 0.600.2 AR03 0.80 1.00 0.900.2 AR05 1.00 1.00 1.350.2 AR06 2.00 1.15 1.700.2 AR13 2.00 1.15 2.500.2 AR10 3.60 1.40 2.500.2 AR10(1/2W) 1.00 2.70 2.500.2 AR12 4.90 1.60 3.100.2 AR12(1W) 1.00 3.55 3.100.2 For detail questions, contact : sales@viking.com.tw 7 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor REVISION HISTORY REVISION DATE CHANGE NOTIFICATION Version D3 Jan. 14, 2013 - DESCRIPTION - Add resistance range for Special Electrical and High Power Rating Electrical Specifications. - Adjust the mockup. Version D4 Apr. 10, 2013 - - Add "RCWV" description in Environment Characteristic Test Method. Version D5 Oct. 16, 2013 - - Increase the resistance range of AR05, TCR15 product. Version D6 Oct. 17, 2014 - - Correct the specification of top cover tape peel force. - Update the resistance range of AR05 (Standard) to 4.7 -1M Version D7 Apr. 28, 2015 - - Add TCR 2ppm and 3ppm products specification. - Increase the resistance range of the products below: * AR02 and AR03 of Standard Electrical Specifications. * AR02, AR03 and AR05 of Special Electrical Specifications. - Correct the element of Top Electrode. Version D8 May. 02, 2016 - - Modify Storage Temperature. Version D9 Aug.04, 2016 - - Update items and requirements of Environmental Characteristics. - Increase the resistance range of Special Electrical Specifications products. Version E Dec.14, 2016 - - Add AR02 High Power Rating Electrical Specifications. www.viking.com.tw For detail questions, contact : sales@viking.com.tw 8 Edition : REV.F Revision:27-Apr-2020 AR Series Thin Film Precision Chip Resistor REVISION HISTORY REVISION Version E1 DATE CHANGE NOTIFICATION Feb. 23, 2017 - DESCRIPTION - Increase the resistance range of AR02 Standard Electrical Specifications. Version E2 Apr. 05, 2017 - - Add TCR 1ppm and products specification. Version E3 Nov.10, 2017 - - Correct the reference standard in Environmental Characteristics. Version E4 Dec.26, 2017 - - Correct the reference standard in Environmental Characteristics. Version E5 Feb. 06, 2018 - - Correct the reference standard in Environmental Characteristics. Version E6 Jul. 24, 2018 - - Update Environment Characteristics item. Version E7 May. 02,2019 - - Increase the AR01 0.1% & 0.25% Precision resistance. Version E8 Oct. 29,2019 - - Increase the resistance range of Standard, Special and High Power Rating Electrical Specifications. Version E9 Jan. 07,2020 - - Define the Dimensions specifications for AR10(1/2W) and AR12(1W). - Add the part number code "N" for 1/20W Power rating. - Extend the resistance range of AR01 (Standard Electrical Specifications). - Add products specifications for AR01(1/20W) and AR10(1/2W). - Update products specifications for AR12(1W). - Define the Recommend Land Pattern for AR10(1/2W) and AR12(1W). Apr. 27,2020 - - Modify the Max. Operating Voltage of AR02 from 25V to 50V. - Modify the Max. Overload Voltage of AR02 from 50V to 100V. - Correct Recommend Land Pattern Dimension A/B of AR10(1/2W) from 0.5mm/2.8mm to 1.00mm/2.70mm. Version F www.viking.com.tw For detail questions, contact : sales@viking.com.tw 9 Edition : REV.F Revision:27-Apr-2020