Data Sheet
Customer：
Product :
Thin Film Precision Chip Resistor - AR Series
Size:
0201/0402/0603/0805/1206/1210/2010/2512
Issued Date:
27-Apr-20
Edition :
REV.F
VIKING TECH CORPORATION
光頡科技股份有限公司
VIKING TECH CORPORATION KAOHSIUNG BRANCH
光頡科技股份有限公司高雄分公司
Viking Electronics (WUXI) CO., LTD.
光頡電子(無錫)有限公司
No.70, Guangfu N. Rad.,
Hsin Chu Industrial Park,
Hukou Hsiang, Hsin Chu Hsien,
303, Taiwan
TEL:886-3-5972931
FAX:886-3-5972935•886-3-5973494
E-mail:sales@viking.com.tw
No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung,
806, Taiwan
TEL:886-7-8217999
FAX:886-7-8228229
E-mail:sales@viking.com.tw
No.1A,(Xixia Road),Machinery & Industry Park,
National Hi-Tech Industrial Development Zone of
Wuxi, Wuxi, Jiangsu Province, China
Zip Code:214028
TEL:86-510-85203339
FAX:86-510-85203667•86-510-85203977
E-mail:wuxisales@tmtec.com.tw
Produced by
(QC)
Approved by
(QC)
Prepared by
(Sales)
Accepted by
(Customer)
27-Apr-20
27-Apr-20
27-Apr-20
Chun
Ben Chang
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
1 Revision:27-Apr-2020
Thin Film Precision Chip Resistor
(AR Series)
■Features
－Advanced thin film technology
－Very tight tolerance down to ±0.01%
－Extremely low TCR down to ±1PPM/C
－Wide resistance range 1ohm ~ 3Mega ohm
－Miniature size 0201 available
■Applications
－Medical Equipment
－Testing / Measurement Equipment
－Printer Equipment
－Automatic Equipment Controller
－Converters
－Communication Device, Cell Phone, GPS, PDA
■Construction
■Dimensions Unit: mm
■Part Numbering
Alumina Substrate
Edge Electrode
Resistor Layer
Bottom Electrode
Barrier Layer
Overcoat
Top Electrode
External Electrode
Marking
Type
Size
(Inch)
L
W
T
D1
D2
Weight
(g)
(1000pcs)
AR01
0201
0.58±0.05
0.29±0.05
0.23±0.05
0.12±0.05
0.15±0.05
0.14
AR02
0402
1.00±0.05
0.50±0.05
0.30±0.05
0.20±0.10
0.20±0.10
0.54
AR03
0603
1.55±0.10
0.80±0.10
0.45±0.10
0.30±0.20
0.30±0.20
1.83
AR05
0805
2.00±0.15
1.25±0.15
0.55±0.10
0.30±0.20
0.40±0.20
4.71
AR06
1206
3.05±0.15
1.55±0.15
0.55±0.10
0.42±0.20
0.35±0.25
9.02
AR13
1210
3.10±0.15
2.40±0.15
0.55±0.10
0.40±0.20
0.55±0.25
10
AR10
2010
4.90±0.15
2.40±0.15
0.55±0.10
0.60±0.30
0.50±0.25
23.61
AR10(1/2W)
2010(1/2W)
4.90±0.15
2.40±0.15
0.55±0.10
0.60±0.30
2.20±0.25
26.68
AR12
2512
6.30±0.15
3.10±0.15
0.55±0.10
0.60±0.30
0.50±0.25
38.06
AR12(1W)
2512(1W)
6.30±0.15
3.10±0.15
0.55±0.10
0.60±0.30
2.50±0.25
44.65
Product
Type
Dimensions
(L×W)
Resistance
Tolerance
Packaging
Code
TCR
(PPM/°C)
Power
Rating
Resistance
Marking
Code
01: 0201
02: 0402
03: 0603
05: 0805
06: 1206
13: 1210
10: 2010
12: 2512
T: ±0.01%
A: ±0.05%
B: ±0.1%
C: ±0.25%
D: ±0.5%
F: ±1%
T: Taping Reel
B: Bulk
5: ±1
X: ±2
O:±3
S: ±5
B: ±10
N: ±15
C: ±25
D: ±50
: Standard
N: 1/20W
Y: 1/16W
X: 1/10W
W: 1/8W
M: 1/6W
P: 1/5W
V: 1/4W
O: 1/3W
U: 1/2W
Q: 3/4W
T: 1W
0010: 1Ω
4R70: 4.7Ω
1001: 1KΩ
1004: 1MΩ
: Standard Marking
for E96 / E24
N: No Marking
AR
03
T
T
Y
N
B
1001
L
T
D1
D2
W
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
2 Revision:27-Apr-2020
■Derating Curve
■Standard Electrical Specifications
Item
Type
Power
Rating
at 70°C
Operating
Temp. Range
Max.
Operating
Voltage
Max.
Overload
Voltage
Resistance Range
TCR
(PPM/°C)
±0.05%
±0.1%
±0.25%
±0.5%
±1%
AR01 (0201)
1/32W
-55 ~ +155°C
15V
30V
－
49.9Ω - 75KΩ
±25,±50
AR02 (0402)
1/16W
-55 ~ +155°C
50V
100V
49.9Ω - 12KΩ
4Ω - 511KΩ
±25,±50
AR03 (0603)
1/16W
-55 ~ +155°C
50V
100V
4.7Ω -332KΩ
1Ω - 1MΩ
±25,±50
AR05 (0805)
1/10W
-55 ~ +155°C
100V
200V
4.7Ω -1MΩ
1Ω - 2MΩ
±25,±50
AR06 (1206)
1/8W
-55 ~ +155°C
150V
300V
4.7Ω - 1MΩ
1Ω - 2.5MΩ
±25,±50
AR13 (1210)
1/4W
AR10 (2010)
1/4W
-55 ~ +155°C
150V
300V
4.7Ω - 1MΩ
1Ω - 3MΩ
±25,±50
AR12 (2512)
1/2W
Lower Resistance:1~10Ω
■Special Electrical Specifications
Item
Type
Power
Rating
at 70°C
Operating
Temp. Range
Max.
Operating
Voltage
Max.
Overload
Voltage
Resistance Range
TCR
(PPM/°C)
±0.01%
±0.05%
±0.1%
±0.25%
±0.5%
±1%
AR02 (0402)
1/16W
-55 ~ +155°C
50V
100V
49.9Ω - 4.99KΩ
－
±1, ±2,±3
49.9Ω - 20KΩ
±5
49.9Ω - 20KΩ
49.9Ω - 100KΩ
±10, ±15
AR03 (0603)
1/16W
-55 ~ +155°C
50V
100V
24.9Ω - 15KΩ
－
±1, ±2,±3
24.9Ω - 60KΩ
±5
24.9Ω -
100KΩ
4.7Ω-
332KΩ
4.7Ω - 511KΩ
±10, ±15
AR05 (0805)
1/10W
-55 ~ +155°C
100V
200V
24.9Ω - 30KΩ
－
±1, ±2,±3
24.9Ω - 150KΩ
±5
24.9Ω -
200KΩ
4.7Ω – 1MΩ
±10, ±15
AR06 (1206)
1/8W
-55 ~ +155°C
150V
300V
24.9Ω - 49.9KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω – 1.5MΩ
±10, ±15
AR13 (1210)
1/ 4W
-55 ~ +155°C
150V
300V
24.9Ω - 49.9KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10, ±15
AR10 (2010)
1/4W
-55 ~ +155°C
150V
300V
24.9Ω - 100KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10, ±15
AR12 (2512)
1/2W
-55 ~ +155°C
150V
300V
24.9Ω - 100KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10, ±15
Derating Curve
0
20
40
60
80
100
020 40 60 80 100 120 140 160 180
Ambient Temperature(℃)
Power ratio(%) .
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
3 Revision:27-Apr-2020
■High Power Rating Electrical Specifications
Item
Type
Power
Rating
at 70C
Operating
Temp.
Range
Max.
Operating
Voltage
Max.
Overload
Voltage
Resistance Range
TCR
(PPM/C)
±0.01%
±0.05%
±0.1%
±0.25%
±0.5%
±1%
AR01
(0201)
1/20W
-55 ~ +155C
25V
50V
－
5KΩ - 75KΩ
±25,±50
AR02
(0402)
1/10W
-55 ~ +155C
50V
100V
49.9Ω - 4.99KΩ
－
±1, ±2,±3
49.9Ω - 20KΩ
±5
49.9Ω - 12KΩ
49.9Ω - 100KΩ
±10, ±15
－
49.9Ω - 12KΩ
4.7Ω~255KΩ
±25,±50
AR03
(0603)
1/10W
-55 ~ +155C
75V
150V
24.9Ω - 15KΩ
－
±1, ±2,±3
24.9Ω - 60KΩ
±5
24.9Ω -
100KΩ
4.7Ω - 332KΩ
4.7Ω - 511KΩ
±10,±15
1Ω -1MΩ
±25,±50
1/6W
-55 ~ +155C
100V
150V
－
10Ω - 332KΩ
±25,±50
AR05
(0805)
1/8W
-55 ~ +155C
150V
300V
24.9Ω - 30KΩ
－
±1, ±2,±3
24.9Ω -150KΩ
±5
24.9Ω -
200KΩ
4.7Ω -511KΩ
4.7Ω -1MΩ
±10, ±15
1Ω - 1MΩ
±25,±50
1/4W
-55 ~ +155C
150V
300V
－
10Ω - 499KΩ
±25,±50
AR06
(1206)
1/4W
-55 ~ +155C
200V
400V
24.9Ω - 49.9KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10,±15
1Ω - 1MΩ
±25,±50
1/3W
-55 ~ +155C
200V
400V
－
10Ω ~1MΩ
±25,±50
AR13
(1210)
1/ 3W
-55 ~ +155C
200V
400V
24.9Ω – 49.9KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10,±15
1Ω - 1MΩ
±25,±50
AR10(2010)
1/3W
-55 ~ +155C
200V
400V
24.9Ω - 49.9KΩ
－
±1, ±2,±3
24.9Ω - 300KΩ
±5
24.9Ω -
499KΩ
4.7Ω - 1MΩ
±10,±15
1Ω - 1MΩ
±25,±50
1/2W
-55 ~ +155C
200V
400V
24.9Ω - 2KΩ
4.7Ω –1MΩ
1Ω –1MΩ
±10,±15,±25,±50
AR12(2512)
3/4W
-55 ~ +155C
200V
400V
24.9Ω - 2KΩ
4.7Ω – 2KΩ
1Ω – 2KΩ
±10,±15,±25,±50
1W
-55 ~ +155C
200V
400V
24.9Ω - 2KΩ
4.7Ω –1MΩ
1Ω –1MΩ
±10,±15,±25,±50
Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
Viking is capable of manufacturing the optional spec based on customer’s requirement.
(Lower Resistance:1~10Ω ; High Power Rating)
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
4 Revision:27-Apr-2020
■Environmental Characteristics
Item
Requirement
Test Method
Tol. ≦ 0.05%
Tol. > 0.05%
Temperature Coefficient of Resistance
(T.C.R.)
As Spec.
MIL-STD-202 Method 304
+25/-55/+25/+125/+25C
Short Time Overload
ΔR±0.05%
ΔR±0.2%
JIS-C-5201-1 4.13
RCWV*2.5 or Max. overload voltage whichever is
lower for 5 seconds
ΔR±0.2% for high power rating
Insulation Resistance
>9999 MΩ
MIL-STD-202 Method 302
Apply 100VDC for 1 minute
Endurance
ΔR±0.05%
ΔR±0.2%
MIL-STD-202 Method 108A
702C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5
hrs “OFF”
ΔR±0.5% for high power rating
0201: >7kΩ →ΔR±0.5%
≦7kΩ→ΔR±0.2%
Damp Heat with Load
ΔR±0.05%
ΔR±0.3%
MIL-STD-202 Method 103B
402C, 90~95% R.H. RCWV for 1000 hrs with 1.5
hrs “ON” and 0.5 hrs “OFF”
ΔR±0.5% for high power rating
Bending Strength
ΔR±0.05%
ΔR±0.1%
JIS-C-5201-1 4.33
Bending amplitude 3 mm for 10 seconds
2010 2512 sizes: 2 mm Other sizes: 3 mm
Solderability
95% min. coverage
MIL-STD-202 Method 208H
2455C for 3 seconds
Resistance to Soldering Heat
ΔR±0.05%
ΔR±0.1%
MIL-STD-202 Method 210E
260±5C for 10 seconds
Dielectric Withstand Voltage
By Type
MIL-STD-202 Method 301
Max. overload voltage for 1 minute
Low Temperature Operation
ΔR±0.05%
ΔR±0.2%
JIS-C-5201-1 4.36
1 hour, -65C, followed by 45 minutes of RCWV
ΔR±0.5% for high power rating
High Temperature Exposure
ΔR±0.5%
MIL-STD-202 Method 108
at +155C for 1000 hrs
RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower
Storage Temperature: 15~28C; Humidity < 80%RH
■Soldering Condition
IR Reflow Soldering Wave Soldering (Flow Soldering)
(1) Time of IR reflow soldering at maximum temperature point 260C：10s
(2) Time of wave soldering at maximum temperature point 260C：10s
(3) Time of soldering iron at maximum temperature point 410C：5s
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
5 Revision:27-Apr-2020
▓Marking
0603 3digit marking
3digit marking for Example: 14C=13K7Ω 13C=13K3Ω
68B=4K99Ω 68X=49.9Ω
Marking Table
Code
E96
Code
E96
Code
E96
Code
E96
01
100
25
178
49
316
73
562
02
102
26
182
50
324
74
576
03
105
27
187
51
332
75
590
04
107
28
191
52
340
76
604
05
110
29
196
53
348
77
619
06
113
30
200
54
357
78
634
07
115
31
205
55
365
79
649
08
118
32
210
56
374
80
665
09
121
33
215
57
383
81
681
10
124
34
221
58
392
82
698
11
127
35
226
59
402
83
715
12
130
36
232
60
412
84
732
13
133
37
237
61
422
85
750
14
137
38
243
62
432
86
768
15
140
39
249
63
442
87
787
16
143
40
255
64
453
88
806
17
147
41
261
65
464
89
825
18
150
42
267
66
475
90
845
19
154
43
274
67
487
91
866
20
158
44
280
68
499
92
887
21
162
45
287
69
511
93
909
22
165
46
294
70
523
94
931
23
169
47
301
71
536
95
953
24
174
48
309
72
549
96
976
Code
A
B
C
D
E
F
G
H
X
Y
Z
Multiplier
100
101
102
103
104
105
106
107
10-1
10-2
10-3
0603 3digit marking for E24 Example: 101=100Ω 102=1KΩ
E24
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
0805~2512 4digit marking Example
Resistance
100Ω
2.2KΩ
10KΩ
49.9KΩ
100KΩ
marking
1000
2201
1002
4992
1003
14C
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
6 Revision:27-Apr-2020
■Packaging
P
Pa
ac
ck
ki
in
ng
g
Q
Qu
ua
an
nt
ti
it
ty
y
&
&
R
Re
ee
el
l
S
Sp
pe
ec
ci
if
fi
ic
ca
at
ti
io
on
ns
s
Unit :mm
Paper Tape Specifications
Unit: mm
Type
A
B
W
E
F
P0
P1
P2
ΦD0
T
AR01
0.40±0.05
0.70±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.10
2.00±0.05
2.00±0.05
1.55±0.03
0.42±0.02
AR02
0.70±0.05
1.16±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.10
2.00±0.05
2.00±0.05
1.55±0.05
0.40±0.03
AR03
1.10±0.05
1.90±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.10
4.00±0.10
2.00±0.05
1.55±0.05
0.60±0.03
AR05
1.60±0.05
2.37±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.10
4.00±0.10
2.00±0.05
1.55±0.05
0.75±0.05
AR06
2.00±0.05
3.55±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.10
4.00±0.10
2.00±0.05
1.55±0.05
0.75±0.05
AR13
2.75±0.05
3.40±0.05
8.00±0.10
1.75±0.05
3.5±0.05
4.00±0.05
4.00±0.10
2.00±0.05
1.60±0.10
0.75±0.05
Peel force of top cover tape
The peel speed shall be about 300mm/min±5%
The peel force of top cover tape shall be between 8gf to 60gf
Type
Ø A
Ø B
Ø C
W
T
Paper
Tape (EA)
Emboss
Plastic
Tape (EA)
AR01
178.0±1.0
60.0+1.0
13.5±0.7
9.5±1.0
11.5±1.0
10,000
-
AR02
178.0±1.0
60.0+1.0
13.5±0.7
9.5±1.0
11.5±1.0
10,000
-
AR03
178.0±1.0
60.0+1.0
13.5±0.7
9.5±1.0
11.5±1.0
5,000
-
AR05
178.0±1.0
60.0+1.0
13.5±0.7
9.5±1.0
11.5±1.0
5,000
-
AR06
178.0±1.0
60.0+1.0
13.5±0.7
9.5±1.0
11.5±1.0
5,000
-
AR13
178.0±1.0
60.0±1.0
13.5±0.7
9.5±1.0
11.5±1.0
5,000
-
AR10
178.0±1.0
60.0+1.0
13.5±0.7
13.5±1.0
15.5±1.0
-
4,000
AR12
178.0±1.0
60.0+1.0
13.5±0.7
13.5±1.0
15.5±1.0
-
4,000
W
E
F
ψ D0
P1P2P0direction of unreeling
A
B
Top TapeBottom Tape
Resistor
Paper Tape
T
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
7 Revision:27-Apr-2020
Emboss Plastic Tape Specifications
W
E
F
ψ D0
P1P2P0direction of unreeling
A
B
Top Tape
Resistor
Emboss Tape
T
ψ D1 1.4Min.
Unit: mm
Type
A
B
W
E
F
P0
P1
P2
ØD0
T
AR10
2.85±0.10
5.45±0.10
12.0±0.10
1.75±0.10
5.5±0.05
4.00±0.05
4.00±0.10
2.00±0.05
1.50+0.10
1.00±0.20
AR12
3.40±0.10
6.65±0.10
12.0±0.10
1.75±0.10
5.5±0.05
4.00±0.05
4.00±0.10
2.00±0.05
1.50+0.10
1.00±0.20
Peel force of top cover tape
The peel speed shall be about 300mm/min±5%
The peel force of top cover tape shall be between 20gf to 80gf
■Recommend Land Pattern Unit: mm
Type
A
B
C
AR01
0.25
0.30
0.40±0.2
AR02
0.50
0.50
0.60±0.2
AR03
0.80
1.00
0.90±0.2
AR05
1.00
1.00
1.35±0.2
AR06
2.00
1.15
1.70±0.2
AR13
2.00
1.15
2.50±0.2
AR10
3.60
1.40
2.50±0.2
AR10(1/2W)
1.00
2.70
2.50±0.2
AR12
4.90
1.60
3.10±0.2
AR12(1W)
1.00
3.55
3.10±0.2
A
B
C
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
8 Revision:27-Apr-2020
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version D3 Jan. 14, 2013 - - Add resistance range for Special
Electrical and High Power Rating Electrical
Specifications.
- Adjust the mockup.
Version D4 Apr. 10, 2013 - - Add "RCWV" description in Environment
Characteristic Test Method.
Version D5 Oct. 16, 2013 - - Increase the resistance range of AR05,
TCR15 product.
Version D6 Oct. 17, 2014 - - Correct the specification of top cover tape
peel force.
- Update the resistance range of AR05
(Standard) to 4.7Ω -1MΩ
Version D7 Apr. 28, 2015 - - Add TCR ±2ppm and ±3ppm products
specification.
- Increase the resistance range of the
products below:
• AR02 and AR03 of Standard Electrical
Specifications.
• AR02, AR03 and AR05 of Special
Electrical Specifications.
- Correct the element of Top Electrode.
Version D8 May. 02, 2016 - - Modify Storage Temperature.
Version D9 Aug.04, 2016 - - Update items and requirements of
Environmental Characteristics.
- Increase the resistance range of Special
Electrical Specifications products.
Version E Dec.14, 2016 - - Add AR02 High Power Rating Electrical
Specifications.
【AR Series】
Thin Film Precision Chip Resistor
www.viking.com.tw For detail questions, contact : sales@viking.com.tw Edition : REV.F
9 Revision:27-Apr-2020
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version E1 Feb. 23, 2017 - - Increase the resistance range of AR02
Standard Electrical Specifications.
Version E2 Apr. 05, 2017 - - Add TCR ±1ppm and products specification.
Version E3 Nov.10, 2017 - - Correct the reference standard in
Environmental Characteristics.
Version E4 Dec.26, 2017 - - Correct the reference standard in
Environmental Characteristics.
Version E5 Feb. 06, 2018 - - Correct the reference standard in
Environmental Characteristics.
Version E6 Jul. 24, 2018 - - Update Environment Characteristics item.
Version E7 May. 02,2019 - - Increase the AR01 0.1% & 0.25%
Precision resistance.
Version E8 Oct. 29,2019 - - Increase the resistance range of Standard,
Special and High Power Rating Electrical
Specifications.
Version E9 Jan. 07,2020 - - Define the Dimensions specifications
for AR10(1/2W) and AR12(1W).
- Add the part number code “N” for 1/20W
Power rating.
- Extend the resistance range of AR01
(Standard Electrical Specifications).
- Add products specifications for
AR01(1/20W) and AR10(1/2W).
- Update products specifications for
AR12(1W).
- Define the Recommend Land Pattern
for AR10(1/2W) and AR12(1W).
Version F Apr. 27,2020 - - Modify the Max. Operating Voltage of AR02
from 25V to 50V.
- Modify the Max. Overload Voltage of AR02
from 50V to 100V.
- Correct Recommend Land Pattern
Dimension A/B of AR10(1/2W) from
0.5mm/2.8mm to 1.00mm/2.70mm.