Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com88
Printed Circuit Board Width
Track Type High Guide (HG)
MTGTK1 73 ± 1mm (2.9 ± 0.05 in.)
MTGTK2 110 ± 1mm (4.3 ± 0.05 in.)
Mounting Track Extrusion
"Cut-to-Size" Formula
Extrusion Length = Printed Circuit
Board Length – 4.5mm (.175 in.)
Sizing Information
Narrow Mounting Track
Extrusion and Components
Cat. No. Std. Pk.
MTGTK1/1M 5
MTGTK1 5
MTGTK1/1M/G 5
MTGTK1/G 5
EPDR1 100
EPDR1/G 100
MTGF1 100
MTGF1/G 100
EPDP1 100
EPDP1/G 100
EPS 200
MT2 100
1.100 1
Mounting Track
1 meter, grey
2 meter, grey
1 meter, green*
2 meter, green*
Accessories
DIN Rail Mount End Section, grey
DIN Rail Mount End Section, green*
DIN Rail Mounting Foot, grey
DIN Rail Mounting Foot, green*
Panel Mount End Section, grey
Panel Mount End Section, green*
DIN Rail / Panel Mount End Section
Screws #4x1/2”, Phillips Pan head
(2 required per end section)
Marking Tags
DIN Rail Mounting Kit
(2x EPDR, 2x MTGF, 4x EPS)
MTGF1
EPDR1
EPS
MTGTK1
For PC Board Widths 73mm (2.9 in.)
W
L
Mount standard or custom printed circuit
boards in Mounting Tracks which can be
conveniently DIN rail or panel mounted in
your control panel or cabinet. These are the
same tracks used for Altech interface mod-
ules. We now make them available to you to
house and protect your custom boards, etc.
Tracks are easily cut to size or can be
ordered precut to specific lengths. They are
easily assembled from standard components
and snap onto 35mm DIN rail or can be panel
mounted.
Each track has two sets of printed circuit
board guides to accept two alternate board
widths.
End Sections hold printed circuit boards
securely in place and keep out foreign
objects.
MOUNTING
When mounting extrusions on DIN rail, order
two or more DIN Rail mounting feet. These
feet slide into grooves on the extrusion. Then
attach two DIN Rail Mount End Sections
with help of EPS screws.
To panel mount, order two Panel Mount End
Sections (and EPS screws), each with an
integral mounting flange with a 6 x 8mm (.24
x .32 in.) hole slot.
If desired, tracks can be direct mounted
using double sided tape. Order two DIN rail
mount end sections (and EPS screws).
• Standard Lengths: 1m (3'-3") or 2m (6'-6")
• Track Material: PVC
• Temperature Limit:
Short Term - 80˚C (176˚F)
Continuous - 70˚C (158˚F)
• End Section, Foot Material: Polyamide
• Preassembled, Precut Lengths Available
• Tracks Accept Standard MT2 Marking Tags
* Green color available on request.
Contact Altech for more information.
PCB Mounting Tracks
Panel
Mount DIN Rail
Mount
