Sign In SHOP BLOG LEARN FORUMS 0 Items VIDEOS ROBOTICS & CNC / SERVOS / MICRO SERVO - MG90S HIGH TORQUE METAL GEAR Micro Servo - MG90S High Torque Metal Gear PRODUCT ID: 1143 90 IN STOCK ADD TO CART 1 1-9 10-99 100+ ADD TO WISHLIST DESCRIPTION TECHNICAL DETAILS DESCRIPTION Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware. Please note, this servo will 'hold' the position even when no signal is sent! To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left. Note that the default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far you could break your servo! TECHNICAL DETAILS Details: Size : 22.8 x 12.2 x 28.5 mm Voltage : 4.8V to 6V DC Weight: 13.4 grams Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V) Stall Torque : At 4.8V: 1.8 kg-cm / 25 oz-in. At 6.0V: 2.2 kg-cm / 30.5 oz-in Spline Count: 20 LEARN Arduino Lesson 14. Servo Motors Learn Arduino, Lesson 14. Servo Motors Modifying Servos for Continuous Rotation Make tiny gear-motors for your next robot! Adafruit 16-Channel PWM/Servo HAT & Bonnet for Raspberry Pi 16 channels of servo-bustin' power for your Pi Quadcopter Spray Can Mod for sanctioned UAV painting Sandblaster - 3D printed sand buggy 3D printed sand buggy! Adafruit 8-Channel PWM or Servo FeatherWing A 8 x servo party for your Feather! Using Servos With CircuitPython and Arduino How to use servo motors with CircuitPython and Arduino Drone Claw Build a flying claw with Circuit Playground and Makecode! LEGO Crickit Rover Make a two wheeled robot MAY WE ALSO SUGGEST... Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C Servo Extension Cable 50cm / 19.5" long Continuous Rotation Servo Standard servo - TowerPro SG-5010 Micro servo Standard Size - High Torque - Metal Gear Servo Servo Extension Cable 30cm / 12" long - Motor party add-on pack for Arduino Continuous Rotation Micro Servo The EggBot Pro Analog Feedback Micro Servo - Metal Gear Analog Feedback Servo DISTRIBUTORS CONTACT SUPPORT DISTRIBUTORS EDUCATORS JOBS FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL EXPAND TO SEE DISTRIBUTORS "Things do not happen. Things are made to happen" - John F. Kennedy ABOUT US ENGINEERED IN NYC Adafruit (R) 4.9