0 Items Sign In
SHOP BLOG LEARN FORUMS VIDEOS
ROBOTICS & CNC / SERVOS / MICRO SERVO - MG90S HIGH TORQUE METAL GEAR
DESCRIPTION
Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can
rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds
you're used to but
smaller
. You can use any servo code, hardware or library to control these
1
ADD TO CART
Micro Servo - MG90S
High Torque Metal
Gear
PRODUCT ID: 1143
90 IN STOCK
1-9
10-99
100+
ADD TO WISHLIST
DESCRIPTION
TECHNICAL DETAILS
servos. Good for beginners who want to make stuff move without building a motor controller
with feedback & gear box, especially since it will fit in small places. Of course, its not nearly as
strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel
Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.
Please note, this servo will 'hold' the position even when no signal is sent!
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and
using the Servo library included with the Arduino IDE (see here for an example sketch). Position
"0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all
the way to the left.
Note that the default servo pulse widths (usually 1ms to 2ms) may not give you a full 180
degrees of motion. In that case, check if you can set your servo controller to custom pulse
lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go
too far you could break your servo!
TECHNICAL DETAILS
LEARN
Details:
Size : 22.8 x 12.2 x 28.5 mm
Voltage : 4.8V to 6V DC
Weight: 13.4 grams
Speed : 0.1 sec/60degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)
Stall Torque : At 4.8V: 1.8 kg-cm / 25 oz-in. At 6.0V: 2.2 kg-cm / 30.5 oz-in
Spline Count: 20
Arduino Lesson 14. Servo
Motors
Learn Arduino, Lesson 14.
Servo Motors
Modifying Servos for
Continuous Rotation
Make tiny gear-motors for
your next robot!
Adafruit 16-Channel
PWM/Servo HAT & Bonnet for
Raspberry Pi
16 channels of servo-bustin'
power for your Pi
Quadcopter Spray Can Mod
for sanctioned UAV painting
Sandblaster - 3D printed
sand buggy
3D printed sand buggy!
Adafruit 8-Channel PWM or
Servo FeatherWing
A 8 x servo party for your
Feather!
Using Servos With
CircuitPython and Arduino
How to use servo motors
with CircuitPython and
Arduino
MAY WE ALSO SUGGEST...
Drone Claw
Build a flying claw with Circuit
Playground and Makecode!
LEGO Crickit Rover
Make a two wheeled robot
Adafruit 16-Channel 12-bit
PWM/Servo Driver - I2C
Servo Extension Cable -
50cm / 19.5" long
Continuous Rotation Servo
Standard servo - TowerPro
SG-5010
Micro servo
Standard Size - High Torque
- Metal Gear Servo
Servo Extension Cable -
30cm / 12" long -
Motor party add-on pack for
Arduino
Continuous Rotation Micro
Servo
The EggBot Pro
Analog Feedback Micro
Servo - Metal Gear
Analog Feedback Servo
EXPAND TO SEE DISTRIBUTORS
DISTRIBUTORS
CONTACT
SUPPORT
DISTRIBUTORS
EDUCATORS
JOBS
FAQ
SHIPPING & RETURNS
TERMS OF SERVICE
PRIVACY & LEGAL
"Things do not happen. Things are
made to happen" -
John F. Kennedy
