5mm LED CBI(R) Circuit Board Indicator 3 Leaded, Bi-Color, Common Cathode 7.24 [.285] MAX O 4.83 [.190] 7.24 [.285] MAX COMMON CATHODE YELLOW OR RED ANODE 3.68 [.145] .508 SQ. [.020] 4.82 [.190] 2.54 [.100] CATHODE RECOMMENDED P.C. BOARD LAYOUT COLOR Red/Green Yellow/Green 5.08 [.200] MAX 3.58 [.141] GREEN ANODE 2.54 [.100] PART NO. 550-3505 550-3605 8.64 [.340] 5.511 [.217] 550-3x05 To order any of the 550-3x05 part numbers with Reverse Polarity (Green Anode Right; Yellow or Red Anode Left), please add -010 to NEW the part numbers shown above. 1.02 [.040] 2.54 [.100] 5.08 [.200] Standard polarity shown in drawing Dimensions in mm[inches] Features Tolerance note: As noted, otherwise: * Common Cathode simplifies design, and the red/green LED provides yellow-orange as a third color * Multiple CBIs form horizontal LED arrays on 7.24mm * LED Protrusion: 0.04 mm [0.016] * CBI Housing: 0.02mm[0.008] (0.285") center-lines. * High Contrast, UL 94 V-0 rated, black housing * Oxygen index: 32% * * * * Polymer content: PBT, 0.462 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1 PART NUMBER ORDERING CODE 5 5 0 - 3 x 0 5 - 0 1 0 Reverse Polarity Option 1) Green Anode Right; Yellow or Red Anode Left -010 Ordering Code Suffix required ONLY for Reverse Polarity Option Typical Operating Characteristics (TA=25C) See LED data sheet for additional information See page 6-55 and 6-56 for Reference Only LED Drive Circuit Examples. See page 6-57 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2 1/2 LED Data sheet Page # 550-3505 Red/Green 635/565 5/8 2.1/2.3 10 65 521-9450 6-45 550-3605 Yellow/Green 583/565 5/8 2.1/2.1 10 65 521-9460 6-45 6-20 Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com 5mm Discrete LED Bi-Color 3 Leaded, Non-Tinted, Diffused 8.81 [.347] .762 [.030] GREEN ANODE 3.81 [.150] 5.84 [.230] COMMON CATHODE 4.82 [.190] .508 [.020] 1.0 [.040] MAX 1.52 [.060] 25.14 [.990] 521-9450, -9460 PART NO. LED COLOR 521-9450 Red/Green 521-9460 Yellow/Green NEW 5.08 [.200] 2.54 [.100] RED ANODE MOUNTING CLIP: 515-0004 located on page 6-48 Dimensions in mm [inches] Red/Green Yellow/Green -9450 -9460 135/135 135/135 Forward Current (mA) Derating (mA/C) From 50C 1. From 40C 25/25 .5/.5 25/25 .5/.5 Peak Current (mA) 90/90 90/90 Operating Temperature (C) -20/+85 -20/+85 Storage Temperature (C) -55/+100 -55/+100 Soldering Temperature 260C, 5 seconds, 1.6 mm from case ABSOLUTE MAXIMUM RATINGS (TA=25C) Power Dissipation (mW) Pulse width = 10 s Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25C) Red/Green Yellow/Green -9450 -9460 Luminous Intensity (mcd) IF=10mA Min. Typical 2.1/4.2 5/8 2.1/4.2 5/8 Peak Wavelength (nm) Peak Typical 635/565 583/565 Viewing Angle (2 1/2) Typical 65 65 Forward Voltage (V) IF=10mA Typical Max. 2.1/2.3 2.5/2.7 2.1/2.1 2.5/2.5 6 is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com 6-45