STG3157 LOW VOLTAGE LOW ON RESISTANCE SPDT SWITCH WITH BREAK BEFORE MAKE FEATURE HIGH SPEED: tPD = 0.3ns (MAX.) at VCC = 4.5V tPD = 0.8ns (MAX.) at VCC = 3.0V tPD = 1.2ns (MAX.) at VCC = 2.3V VERY LOW POWER DISSIPATION: ICC = 1A(MAX.) at TA=85C LOW "ON" RESISTANCE VIN=0V: RON =7(MAX.TA=85C) atVCC =4.5V RON = 9 (MAX. TA=85C) at VCC = 3.0V WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 1.65V to 5.5V SINGLE SUPPLY TTL THRESOLD ON CONTROL INPUT at VCC = 2.7 to 3.6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 3157 LATCH-UP PERFORMANCE EXCEEDS 300mA (JESD 17) DESCRIPTION The STG3157 is an high-speed spdt CMOS ANALOG S.P.D.T. (Single Pole Dual Throw) SWITCH or 2:1 Multiplexer/Demultiplexer Bus Switch fabricated in silicon gate C2MOS tecnology. It designed to operate from 1.65V to 5.5V, making this device ideal for portable applications. It offers very low ON-Resistance (<9) at VCC=3.0V. The IN input is provided to control the S.P.D.T. switch, it's compatible with standard SOT323-6L ORDER CODES PACKAGE T&R SOT323-6L STG3157CTR CMOS output. The switch S1 is ON (it is connected to common Port D) when the IN input is held high and OFF (high impedance state exists between the two ports) when IN is held low; the switch S2 is ON (it is connected to common Port D) when the IN input is held low and OFF (high impedance state exists between the two ports) when IN is held high. Additional key faetures are fast switching speed, Break Before Make Delay Time and Very Low Power Consumption. All inputs and output are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage. It's available in the commercial temperature range in smallest six lead smd package on the market. PIN CONNECTION AND IEC LOGIC SYMBOLS September 2002 1/10 STG3157 INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL 1, 3 4 6 5 S1, S2 D IN VCC 2 GND NAME AND FUNCTION Independent Channel Common Channel Control Positive Supply Voltage Ground (0V) TRUTH TABLE IN SWITCH S1 SWITCH S2 H L ON OFF(*) OFF(*) ON *) High Impedance ABSOLUTE MAXIMUM RATINGS Symbol VCC Parameter Supply Voltage Value Unit -0.5 to +7.0 V DC Input Voltage -0.5 to VCC + 0.5 V VIC DC Control Input Voltage -0.5 to Vcc + 0.5 V VI VO DC Output Voltage -0.5 to VCC + 0.5 V IIKC DC Input Diode Current on control pin (VIN< 0V) 50 mA IIK DC Input Diode Current (VIN< 0V) 50 mA IOK DC Output Diode Current 20 mA IO DC Output Current + 128 mA ICC or IGND DC VCC or Ground Current Storage Temperature Tstg TL Lead Temperature (10 sec) 100 mA -65 to +150 C 300 C Absolute Maximum Ratings are those values beyond which damage to the device may occour. Functional operation under these condition is not implied RECOMMENDED OPERATING CONDITIONS Symbol VCC Parameter Supply Voltage (note 1) Unit 1.65 to 5.5 V Input Voltage 0 to VCC V VIC Control Input Voltage 0 to 5.5 V VO Output Voltage 0 to VCC V Top Operating Temperature -55 to 125 C 0 to 10 0 to 5 ns/V VI dt/dv Input Rise and Fall Time Control Input for Vcc= 2.3V - 3.6V Input Rise and Fall Time Control Input for Vcc= 4.5V - 5.5V 1) Truth Table guaranteed: 1.2V to 6.0V 2/10 Value STG3157 DC SPECIFICATIONS Test Condition Symbol VIH VIL RON Parameter Typ. Max. Min. Max. -55 to 125C Min. 0.75VCC 0.75VCC 0.75VCC 0.7VCC 0.7VCC 0.7VCC 2.7-3.6 Low Level 1.65-1.95 Input Voltage 2.3-5.5 2 Switch ON Resistance 2.7-3.6 4.5 ON Resistance Match between channels ON Resistance FLATNESS OFF State Leakage Current 2 Unit Max. V 2 0.25VCC 0.25VCC 0.25VCC 0.3VCC 0.3VCC 0.3VCC VS=0V IS=30mA 4.4 0.8 7 0.8 7 0.8 9 VS=2.4V IS=30mA 4.9 12 12 14.5 VS= 4.5V IS=30mA 6.1 15 15 18 VS=0V IS=24mA 5.2 9 9 11 VS=3V IS=24mA 7.8 20 20 24 VS=0V IS=8mA 6.5 12 12 14.5 VS=2.3V IS=8mA 9.6 30 30 36 VS=0V IS=4mA 9.0 20 20 24 VS=1.65V IS=4mA 14 50 50 60 4.5 VS=3.15V IS=30mA 0.10 3.0 VS=2.1V IS=24mA 0.10 2.3 VS=1.6V IS=8mA 0.20 1.65 VS=1.15V IS=4mA 0.35 5.0 VS=0 to VCC IS=30mA 3 3.3 VS=0 to VCC IS=24mA 6 2.5 VS=0 to VCC IS=8mA 14 1.8 VS=0toVCC IS=4mA 80 1.65-1.95 VS=0 to VCC 0.05 1.65 IOFF Min. -40 to 85C High Level 1.65-1.95 Input Voltage 2.3-5.5 2.3 RFLAT TA = 25C VCC (V) 3.0 RON Value V 0.1 1 10 A 3/10 STG3157 Test Condition Symbol IIN ICC Parameter Input Leakage Current Quiescent Supply Current (All Channel ON or OFF) Value TA = 25C VCC (V) Min. 0 - 5.5 VIN= 0 to 5.5V 5.5 VIN=VCC or GND -40 to 85C Min. -55 to 125C Max. Min. Unit Typ. Max. Max. 0.05 0.1 1 10 A 1 1 10 A AC ELECTRICAL CHARACTERISTICS (CL = 50pF, RL = 500) Test Condition Symbol tLH, tHL Parameter Propagation Delay tPZH, tPZL Output Enable Time (D to Sn) tPLZ, tPHZ Output Disable Time (D to Sn) tD Q Break Before Make Time Delay Charge injection TA = 25C VCC (V) 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-1.95 2.3-2.7 3.0-3.6 4.5-5.5 1.65-5.5 Value Min. Typ. Max. 1.2 0.8 0.3 15 11 7 5.2 10 7 5 3.5 VI=OPEN 7 3.5 2.5 1.7 3 2 1.5 1.7 0.5 5 3.3 -40 to 85C -55 to 125C Min. Max. Min. Max. 7 3.5 2.5 1.7 3 2 1.5 1.7 1.2 0.8 0.3 20 14 7.6 5.7 13 7.5 5.3 3.8 7 3.5 2.5 1.7 3 2 1.5 1.7 1.8 1.2 0.5 27 17 9 7 16 9 6.5 5 0.5 0.5 Unit ns ns ns ns 23 19 pC ANALOG SWITCH CHARACTERISTICS (CL= 5pF, RL=50, TA=25C) Test Condition Symbol Parameter Off Isolation 1.65-5.5 Xtalk Crosstalk 1.65-5.5 -3dB Bandwidth 1.65-5.5 BW CIN CSn CD 4/10 Control Pin Input Capacitance Sn Port Capacitance D Port Capacitance when Switch is Enabled TA = 25C VCC (V) OIRR Value Min. RL= 50 f= 10MHz RL= 50 f= 10MHz RL= 50 Typ. Max. -40 to 85C -55 to 125C Min. Min. Max. Unit Max. -57 dB -54 dB 250 MHz 5 5.0 f= 1MHz 13 f= 1MHz 21 5.0 pF STG3157 ON RESISTANCE OFF ISOLATION ON LEAKAGE BANDWIDTH OFF LEAKAGE CHANNEL TO CHANNEL CROSSTALK 5/10 STG3157 TEST CIRCUIT TEST tPLH, tPHL SWITCH Open tPZL, tPLZ VCC tPZH, tPHZ GND CL = 50pF or equivalent (includes jig and probe capacitance) RL = R1 = 500 or equivalent RT = ZOUT of pulse generator (typically 50) SWITCHING TIMES WAVEFORM 6/10 STG3157 SWITCHING TIMES WAVEFORM BREAK BEFORE MAKE TIME DELAY CHARGE INJECTION ( VGEN=0V, RGEN=0, R L=1M, CL=100pF) 7/10 STG3157 SOT323-6L MECHANICAL DATA mm. mils DIM. MIN. MAX. MIN. TYP. MAX. A 0.80 1.10 31.5 43.3 A1 0.00 0.10 0.0 3.9 A2 0.80 1.00 31.5 39.4 b 0.15 0.30 5.9 11.8 C 0.10 0.18 3.9 7.1 D 1.80 2.20 70.9 86.6 E 1.80 2.40 70.9 94.5 E1 1.15 1.35 45.3 53.1 e 0 e1 L 8/10 TYP 0.10 .65 25.6 1.3 51.2 0.30 3.9 11.8 STG3157 Tape & Reel SOT323-xL MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 175 180 185 6.889 7.086 7.283 C 12.8 13 13.2 0.504 0.512 0.519 D 20.2 N 59.5 0.795 60 T 60.5 2.362 14.4 0.567 Ao 2.25 0.088 Bo 2.7 0.106 Ko 1.2 0.047 Po 3.98 4 4.2 0.156 0.157 0.165 P 3.98 4 4.2 0.156 0.157 0.165 9/10 STG3157 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com 10/10