ES1A - ES1G 1.0A SURFACE MOUNT SUPER-FAST RECTIFIER SPICE MODELS: ES1A ES1B ES1C ES1D ES1G Features * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 30A Peak Ideally Suited for Automated Assembly Mechanical Data * * * * * * * * SMA B A Case: Molded Plastic Case Material - UL Flammability Rating Classification 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Marking: Type Number & Date Code: See Below Ordering Information: See Below Weight: 0.064 grams (approx.) Dim Min Max A 2.29 2.92 B 4.00 4.60 C 1.27 1.63 D 0.15 0.31 C D J H Maximum Ratings and Electrical Characteristics G E E 4.80 5.59 G 0.10 0.20 H 0.76 1.52 J 2.01 2.62 All Dimensions in mm @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 110C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Symbol ES1A ES1B ES1C ES1D ES1G Unit VRRM VRWM VR 50 100 150 200 400 V VR(RMS) 35 70 105 140 280 V IO 1.0 A IFSM 30 A 3/4 1.25 @ IF = 0.6A @ IF = 1.0A VFM @ TA = 25C @ TA = 100C IRM 5.0 200 Reverse Recovery Time (Note 1) trr 25 Typical Total Capacitance (Note 2) CT 10 pF RqJT 40 C/W Tj, TSTG -65 to +150 C Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Terminal (Note 3) Operating and Storage Temperature Range Ordering Information Notes: 0.90 0.98 V mA 35 ns (Note 4) Device* Packaging Shipping ES1x-13 SMA 5000/Tape & Reel 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = Device type, e.g. ES1A-13. Marking Information YWW XXXX DS14001 Rev. 9 - 2 XXXX = Product type marking code, ex. ES1A = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 1 of 2 www.diodes.com ES1A - ES1G a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 1.5 1.0 0.5 0 25 50 75 100 125 150 10 ES1A - ES1D 0.1 Tj = 25C 0.01 175 0 TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) ES1G 1.0 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Single Half-Sine-Wave (JEDEC Method) Tj = 100C 20 10 10 1.0 Tj = 25C 0 0.1 1 10 100 0 NUMBER OF CYCLES AT 60 Hz Fig. 3 Surge Current Derating Curve 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS14001 Rev. 9 - 2 2 of 2 www.diodes.com ES1A - ES1G