WT Gare} Metallized polypropylene capacitors for stringent requirements A-05-)9 @ Extremely low dissipation factor (tan 5). Mi Constantly negative TK. Ml Suitable for sample and hold circuits because of low dielectric absorption. Mf Suitable for applications in high frequencies. Bf Available in high capacitance values e.g. for frequency dividing in loudspeakers. Ml Available taped and reeled up to and including case size 15 x 26 x 31.5 / PCM 27.5. Technical Data Dielectric: Polypropylene film. Capacitor electrodes: Vacuum-deposited aluminium. Encapsulation: Flame-retardent plastic case, UL 94 V-O, with epoxy resin seal. Colour: Red. Marking: Black. Temperature range: - 55 C to + 100 C. Test specifications: In accordance with IEC 384-16 and CECC 31 200. Test category: 55/100/56 in accordance with IEC. Insulation resistance at + 20 C: Capacitance < 0.33 yF: > 110 megohms (mean value: 5 X 10 megohms) Capacitance > 0.33 WF: 2 30000 sec (megohms X yF} (mean value: 100 000 sec} In accordance with IEC 384-16 and CECC 31200. Measuring voltage: 100 V/1 min. Dissipation factors at + 20 C: tan 6 at f C<0.1 pF }O.1 pE<C<1.0 pF] C>1.0 pF TkHz | <04x 107 <0.5 x 10% <1.0 xX 104 10 kHz | <0.6 x 10 <0.8 x 10 - 100 kHz | <2.5 10 - - Capacitance tolerances: + 20%, + 10%, + 5%, Temperature characteristics: See graph page 6. Permissible AC voltages in relation to frequency at 10 C internal temperature rise (general guide): 250 VDC 160 VDC - z x Maximum pulse rise time: Capacitance Pulse rise time V/ sec oF/ pF max. operation / test 160 VDC | 250 VDC | 400 VDC | 630 VDC 11000 VDC 1000 ... 6800 - - - 60/600 | 65/650 0.01 ...0.022) - 45/450 | 45/450 | 50/500 | 55/550 0,033 ... 0.068} 20/200 | 25/250 | 30/300 | 35/350 | 40/400 0.3 ...0.22 | 13/130 } 15/150 | 17/170 | 20/200 | 22/220 0.33 ...0.68 | 13/130 | 10/100 | 13/130 | 15/150 | 18/180 100 ...22 | 75/75 | 7.5/75 | 9/90 | 11/110] 13/130 33 4.47 6/60 | 6/60 | 8/80 | 9/90 - 68 ...10 4/40 | 5/50 - - - for pulses equal fo the rated voltage. Test voltage: 1.6 Vr, 2 sec. Vibration: 6 hours at 10... 2000 Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC 68-2-6. Low air density: ] kPa=10 mbarin accordance with IEC 68-2-13. Bump test: 4000 bumps at 390 m/sec? in accordance with IEC 68-2-29. Dielectric absorption: 0.05 %. Voltage derating: A voltage derating factor of 1.35 % per K must be applied from + 85 C for DC voltages and from + 75 C for AC voltages. Graphs see page 6. 2 45F Mi 4827950 0004700 594 om 45 General Data SW ae 46 D 15F mm 4827950 000870) 420 me