Specifications are subject to change without notice (29.04.03) 1
Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
• 8 NPN- or PNP-transistor outputs
for control of floor-indicators
• Open printed circuit board
• Bracket for DIN-rail mounting available
• LED-indications for supply and Dupline®carrier
• 3-wire system with Dupline®and DC-supply through
G 2196 0000 700
• Channel coding by GAP 1605
Product Description Ordering Key
Module with 8 NPN- or PNP-
transistor outputs for direct
interface to elevator floor
indicators. The 8 outputs can
either be connected to the 8
inputs of intelligent floor indi-
cators which are controlled
by bit-combinations or they
can be used to drive LED-
segments directly. All modules
in an elevator is connected to
the same 3 wires for bus-
communication with the con-
trol system and DC-power-
supply for the lamps/LED’s.
Installer friendly mounting,
operation and maintenance
without requirement of any
special tools or programm-
ing.
Type: Dupline®
Open PCB
Output-Module
Number of I/Os
Output type
DC-supply
Type Selection
Supply Ordering no. Ordering no.
NPN-outputs PNP-outputs
10-30 VDC G 2130 5511 700 G 2130 5521 700
G 2130 5521 700
Output Specifications
Supply Specifications
Output-Module for Elevators
Outputs 8 PNP-transistors
Output voltage drop ≤2.0 V
Current per output ≤100 mA
Total load capability (01..08) ≤500 mA
Reverse polarity protection Yes
Short-circuit protection None
Built-in protective diodes Yes
Off-state leakage current ≤200 µA
Response time 1 pulse train
(136 ms @ 128 channels)
Power supply
Overvoltage cat. III (IEC 60664)
Rated operational voltage (Vin) 10-30 VDC (ripple included)
Ripple ≤3 V
Reverse polarity protection Yes
Current consumption ≤45 mA
Power dissipation ≤1 W
Inrush current ≤1 A
Transient protection voltage 800 V
Dielectric voltage
Supply - Dupline®None
Supply - Outputs None
Type G 2130 55.1 700
General Specifications
Power ON delay Typ. 2 s
Indication for
Supply ON LED, green
Dupline®carrier LED, yellow
Environment
Operating temperature -20 to +50°C (-4 to +122°F)
Storage temperature -50 to +85°C (-58 to +185°F)
Humidity (non-condensing) 20 - 80%
Mechanical resistance
Shock 15 G (11 ms)
Vibration 2 G (6 to 55 Hz)
Dimensions Open PCB 74 x 59 mm
4 pcs. of nylon PA6 snap
locks are included for mount-
ing the PCB in ø 4.8 holes
Weight 50 g