3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series * Tripolarization to mating socket * 50 mil x 100 mil halves the connector length * Latch and eject for rugged high performance applications * Available for thru hole or surface mount attachment * High temperature plastic * Four-wall shroud provides contact protection * Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 * RoHS* compliant version available (RB plating suffix) Date Modified: September 2, 2005 TS-0253-29 Sheet 1 of 7 Physical Insulation Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black (RoHS compliant) or Natural Contact Material: Copper Alloy Plating Underplating: 100 [ 2.54 m ] Nickel Wiping Area: 30 [ 0.76 m ] Gold Solder Tails: 300 [7.6 m ] Matte Tin (RoHS compliant) or Tin-Lead (see ordering information) Terminal Finish Indicator: e3 (ref JESD97) Marking: 3M Logo, Part Number and Orientation Triangle Electrical Current Rating: 0.5 A Insulation Resistance: > 1 x 109 at 500 Vdc Withstanding Voltage: 500 Vrms at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: Maximum 260C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle Table 1 In c h Contact Qty [m m ] T o le ra n c e U n le s s N o te d Dimensions A B C D Short Ref D Long Ref .0 .0 0 .1 .0 1 .0 0 5 020 [ ] D im e n s io n s fo r R e fe re n c e O n ly 1.060 [26.92] .722 [18.34] .500 [12.70] 1.671 [42.44] 1.842 [46.77] 026 1.210 [30.73] .872 [22.15] .850 [16.51] 1.817 [46.15] 1.987 [50.47] 036 1.460 [37.08] 1.122 [28.50] .900 [22.86] 2.070 [52.58] 2.274 [57.76] 040 1.560 [39.62] 1.222 [31.04] 1.000 [25.40] 2.170 [55.12] 2.365 [60.07] in c h .0 0 0 A B 050 .015 X .015 [0.38] X [0.38] 1.810 [45.97] 1.472 [37.39] 1.250 [31.75] 2.421 [61.49] 2.609 [66.27] 060 2.060 [52.32] 1.722 [43.74] 1.500 [38.10] 2.671 [67.84] 2.872 [72.95] See Note 1 068 2.260 [57.40] 1.922 [48.82] 1.700 [43.18] 2.870 [72.90] 3.083 [78.31] 080 2.560 [65.02] 2.222 [56.44] 2.000 [50.80] 3.178 [80.72] 3.370 [85.60] 100 3.060 [77.72] 2.722 [69.14] 2.500 [63.50] 3.676 [93.37] 3.875 [98.43] C 2X .092 [2.34] Position 2 .310 [7.87] 810 Series Table 2 Position 1 .100 Ref [2.54] .015 X .015 [0.38] X [0.38] PCB Thickness "F" Solder Tail Length .010 .062 [15.7] .090 [2.29] .094 [2.39] .112 [2.79] .125 [3.18] .143 [3.63] .050 Typ [1.27] D Long Latch Short Latch .440 .010 [11.18] .165 .010 [ 4.19 ] .828 Ref [ 21.03 ] .620 Ref [ 15.75 ] .405 [10.29] 2X O.116 [2.95] .105 [2.67] .160 Ref [4.06] .265 [6.73] .306 Ref [7.77] .140 .010 [3.56] .015 [0.38] Position 1 Orientation Triangle "F" (See Table 2) Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050 X .100 Wiremount Socket 82XXX Series. Ordering Information 81XXX-5X0X03-XX Contact Quantity (See Table 1) Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6= With Long Ejector Latches Installed 3M Interconnect Solutions http://www.3M.com/interconnects/ Plating suffix: blank = tin lead tails RB = matte tin tails (RoHS compliant) Contact Tail: 2 = Solder Tail for .062 [ 1.57 ] PC Board 3 = Solder Tail for .094 [ 2.39 ] PC Board 4 = Solder Tail for .125 [ .318 ] PC Board Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) TS-0253-29 Sheet 2 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle Table 3 .050 .002 [1.27] O.024 .003 Typ [0.64] Ejector Latches Dimension E Min None .575 [14.61] Long 1.010 [25.65] Short .885 [22.48] *Solder Thief Solder Pads (See Note 2) .100 .002 [2.54] 810 Series .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] *Solder Thief Solder Pads required only on Solder side of PC Board. View A C .002 E .025 .002 [0.64] .050 .002 Typ [1.27] Tolerance Noncumulative .355 Max [9.02] .305 Min [7.75] Position 2 Flow Solder Direction View A Position 1 2X O .109 .002 [2.77] O.024 .003 Typ [0.64] .100 .002 [2.54] Recommended Mounting Hole Pattern .160 .002 [4.06] (Shown for mounting side of PC Board) Notes: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC. Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the solder bath last. 3. In order to facilitate flow soldering. It is recommended that ejector latches be installed after the soldering process. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0253-29 Sheet 3 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 1 Dimensions Contact Qty A 020 1.060 [26.92] .722 [18.34] 1.671 [42.44] 1.842 [46.77] 026 1.210 [30.73] .872 [22.15] 1.817 [46.15] 1.987 [50.47] 1.010 [25.65] 036 1.460 [37.08] 1.122 [28.50] 2.070 [52.58] 2.274 [57.76] 1.260 [32.00] 040 1.560 [39.62] 1.222 [31.04] 2.170 [55.12] 2.365 [60.07] 1.360 [34.54] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.609 [66.27] 1.610 [40.89] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.872 [72.95] 1.860 [47.24] 068 2.260 [57.40] 1.922 [48.82] 2.870 [72.90] 3.083 [78.31] 2.060 [52.32] 080 2.560 [65.02] 2.222 [56.44] 3.178 [80.72] 3.370 [85.60] 2.360 [59.94] 100 3.060 [77.72] 2.722 [69.14] 3.676 [93.37] 3.875 [98.43] 2.860 [72.64] B C Short Ref C Long Ref D .860 [21.84] A Table 2 B .310 [7.87] See Note 1 Position 2 PCB Thickness "F" Solder Tail Length .010 .062 [15.7] .090 [2.29] .094 [2.39] .112 [2.79] .125 [3.18] .143 [3.63] Position 1 .100 Ref [2.54] .015 X .015 [ 0.38 ] X [ 0.38 ] .265 [6.73] .050 Typ [1.27] .140 .010 "F" (See Table 2) .100 [2.54] Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050 x .100 82XXX Series Socket. Ordering Information Header 81XXX-6X0X0X-XX Contact Quantity (See Table 1) Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6 = With Long Ejector latches Installed 3M Interconnect Solutions http://www.3M.com/interconnects/ Board Mounting Options: 1 = None 3 = Press fit posts both ends Plating suffix: blank = tin lead tails RB = matte tin tails (RoHS compliant) Contact Tail: (See Table 2) 2 = Solder Tail for .062 [ 1.57 ] PC Board 3 = Solder Tail for .094 [ 2.39 ] PC Board 4 = Solder Tail for .125 [ .318 ] PC Board Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) TS-0253-29 Sheet 4 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series .050 .002 [1.27] .025 .003 [0.64] Table 3 .100 .002 [2.54] Ejector/Latches *Solder Thief Solder Pads (See Note2) .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] Dimension E (Min) None .215 [ 5.46 ] Long .650 [16.51] Short .525 [13.34] *Solder Thief Solder Pads required only on Solder side of PC Board. View A D .002 E .160 Min [4.06] 2X .205 .003 [5.21] .050 .003 [1.27] .050 .002 Typ [1.27] Tolerance Noncumulative .100 .002 [2.54] Flow Solder Direction VIEW A .225 Min [5.72] View A 2X .109 .002 [2.77] .100 .002 [2.54] .025 .003 Typ [0.64] In c h [m m ] Recommended Mounting Hole Pattern (Shown for mounting side of PC Board) T o le ra n ce U n le s s N o ted in c h .0 .0 0 .1 .0 1 .00 5 .0 00 [ ] D im e n sio n s fo r R e fe re nce O n ly Notes: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder bath last. 3M Interconnect Solutions http://www.3M.com/interconnects/ TS-0253-29 Sheet 5 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 1 Contact Qty A B Position 2 .310 [7.87] See Note 1 Position 1 .100 Ref [2.54] .015 X ..015 [0.38] X [0.38] .050 Typ [1.27] Dimensions A B D Short Ref D Long Ref tape & suffix reel 020 1.060 [26.92] .722 [18.34] 1.671 [42.44] 1.842 [46.77] WD 026 1.210 [30.73] .872 [22.15] 1.817 [46.15] 1.987 [50.47] 036 1.460 [37.08] 1.122 [28.50] 2.070 [52.58] 2.274 [57.76] 040 1.560 [39.62] 1.222 [31.04] 2.170 [55.12] 2.365 [60.07] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.609 [66.27] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.872 [72.95] 068 2.260 [57.40] 1.922 [48.82] 2.870 [72.90] 3.083 [78.31] 080 2.560 [65.02] 2.222 [56.44] 3.178 [80.72] 3.370 [85.60] 100 3.060 [77.72] 2.722 [69.14] 3.676 [93.37] 3.875 [98.43] WE WF WG WH D Short Latch Position 1 Orientation Triangle Long Latch .165 .010 [4.19] .140 .010 [3.56] .440 .010 [11.18] .828 Ref [21.03] .620 Ref [15.75] .092 [2.34] .015 [0.38] Optional Single Press Fit Post Mount/Alignment Feature .265 [6.73] .405 [10.29] .080 [2.03] .346 .010 [8.79] Optional Metal Clip Retention .116 [2.95] In ch [m m ] T oleran c e U n le s s N oted inc h Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050 X .100 82XXX Series Wiremount Socket. Ordering Information Header Ejector/Latch System: 0 = None 5 = With Short Ejectors Installed 6 = With Long Ejector Latches Installed Board Mounting Options: 1 = None 4 = Press Fit Post Mount at Position 1 end 7 = Metal retention clips 8 = #1 end press fit post & metal retention clips 3M Interconnect Solutions http://www.3M.com/interconnects/ .00 .0 1 .0 0 5 .00 0 [ ] D im ensions for R eference O nly 81XXX-6X0C0X-XX-XX Contact Quantity (See Table 1) .0 .1 Packaging Options: Blank = Trays WX = Tape & Reel Package (see table) Plating suffix: blank = tin lead tails RB = matte tin tails (RoHS compliant) Ejector Latch Long 3505-28 (natural) 3505-28B (black) Short 3505-29 (natural) 3505-29B (black) TS-0253-98 Sheet 6 of 7 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM 4-Wall, Tripolarized Header .050 x .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Ejector Latches Dimensions No .775 [19.69] Short 1.085 [27.56] Long 1.21 [30.73] H Min No. of Positions .065 .002 Typ [1.65] .042 .003 Typ (Plated thru hole) [1.07] Typ, Full R Detail A Dimensions F G 20 .450 [11.43] N/A 26 .600 [15.24] N/A 36 .850 [21.59] N/A 40 .950 [24.13] N/A 50 1.200 [30.48] .025 [6.35] 60 1.450 [36.83] 0.000 68 1.650 [41.91] 0.000 80 1.950 [49.53] 0.000 100 2.450 [62.23] 0.000 Optional plated thru hole for metal clip retention C L F Optional Drilled Hole for Plastic Post .109 .002 [2.77] C L .050 .002 Typ [1.27] Tolerance Noncumulative See Detail A .158 .002 [3.96] Position 2 .029 .001 [0.74] 2X .075 .002 [1.09] C L G .220 .003 [5.59] .376 [9.55] C L .110 .002 [2.79] Position 1 H .280 [7.11] .205 .003 [5.21] Recommended Mounting Hole Pattern (Shown for mounting side of PC Board) TS-0253-29 Sheet 7 of 7 3M Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/328-1368 www.3M.com/electronics Minimum 10% Post-Consumer Fiber Printed in USA. (c) 3M 2005