81040-600203RB - 3M - Datasheet.Live

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Physical

Electrical

Environmental

* RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values

in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,

this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.

Insulation

Material: High Temperature Plastic (LCP)

Flammability: UL 94V-0

Color: Black (RoHS compliant) or Natural

Contact

Material: Copper Alloy

Plating

Underplating: 100 µ″ [ 2.54 µm ] Nickel

Wiping Area: 30 µ″ [ 0.76 µm ] Gold

Solder Tails: 300 µ″ [7.6 µm ] Matte Tin (RoHS compliant) or Tin-Lead (see

ordering information)

Terminal Finish Indicator: e3 (ref JESD97)

Marking: 3M Logo, Part Number and Orientation Triangle

Current Rating: 0.5 A

Insulation Resistance: > 1 × 109 Ω at 500 Vdc

Withstanding Voltage: 500 Vrms at Sea Level

Temperature Rating: -55°C to +105°C

Process Rating: Maximum 260°C (per J-STD-020C)

Moisture Sensitivity Level: 1 (per J-STD-020C)

TS-0253-29

Sheet 1 of 7

• Tripolarization to mating socket

•50 mil × 100 mil halves the connector length

• Latch and eject for rugged high performance

applications

• Available for thru hole or surface mount

attachment

• High temperature plastic

• Four-wall shroud provides contact protection

• Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100

• RoHS* compliant version available (RB plating

suffix)

Date Modified: September 2, 2005

UL File No.: E68080

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Table 1

Contact

Qty

Dimensions

A B C D Short

Ref

D Long

Ref

020 1.060

[26.92] .722

[18.34] .500

[12.70] 1.671

[42.44] 1.842

[46.77]

026 1.210

[30.73] .872

[22.15] .850

[16.51] 1.817

[46.15] 1.987

[50.47]

036 1.460

[37.08] 1.122

[28.50] .900

[22.86] 2.070

[52.58] 2.274

[57.76]

040 1.560

[39.62] 1.222

[31.04] 1.000

[25.40] 2.170

[55.12] 2.365

[60.07]

050 1.810

[45.97] 1.472

[37.39] 1.250

[31.75] 2.421

[61.49] 2.609

[66.27]

060 2.060

[52.32] 1.722

[43.74] 1.500

[38.10] 2.671

[67.84] 2.872

[72.95]

068 2.260

[57.40] 1.922

[48.82] 1.700

[43.18] 2.870

[72.90] 3.083

[78.31]

080 2.560

[65.02] 2.222

[56.44] 2.000

[50.80] 3.178

[80.72] 3.370

[85.60]

100 3.060

[77.72] 2.722

[69.14] 2.500

[63.50] 3.676

[93.37] 3.875

[98.43]

Table 2

PCB Thickness “F” Solder Tail Length ± .010

.062 [15.7] .090 [2.29]

.094 [2.39] .112 [2.79]

.125 [3.18] .143 [3.63]

TS-0253-29

Sheet 2 of 7

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dimensions for Reference

Onl

Tolerance Unless Noted

[m m ]

Inch

Ordering Information

Notes:

1. This polarization bump does not exist on the 20 position header.

2. Recommended to be mated to the .050″ X .100″ Wiremount Socket 82XXX Series.

Ejector Latch

Long

3505-28 (natural)

3505-28B (black)

Short

3505-29 (natural)

3505-29B (black)

Ejector/Latch System:

0 = None

5 = With Short Ejectors Installed

6= With Long Ejector Latches Installed

Contact Tail:

2 = Solder Tail for .062 [ 1.57 ] PC Board

3 = Solder Tail for .094 [ 2.39 ] PC Board

4 = Solder Tail for .125 [ .318 ] PC Board

Contact Quantity

(See Table 1)

81XXX-5X0X03-XX

.015 X .015

[0.38] X [0.38]

See Note 1

Position 2

2X .092

[2.34]

.310

[7.87] Position 1

.050 Typ

[1.27]

.100 Ref

[2.54]

.015 X .015

[0.38] X [0.38]

Position 1

Orientation Triangle

.440 ± .010

[11.18]

.620 Ref

[ 15.75 ] .405

[10.29]

.265

[6.73]

2X Ø.116

[2.95] .105

[2.67]

.160 Ref

[4.06]

.306 Ref

[7.77]

“F” (See Table 2)

.015

[0.38]

.140 ± .010

[3.56]

Short Latch

Long Latch

.165 ± .010

[ 4.19 ]

.828 Ref

[ 21.03 ]

Plating suffix:

blank = tin lead tails

RB = matte tin tails

(RoHS compliant)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Table 3

Ejector Latches Dimension E Min

None .575 [14.61]

Long 1.010 [25.65]

Short .885 [22.48]

TS-0253-29

Sheet 3 of 7

Notes:

1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time).

This will help prevent solder bridging.

2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC.

Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the

rows which leave the solder bath last.

3. In order to facilitate flow soldering. It is recommended that ejector latches be installed after the soldering process.

*Solder Thief Solder Pads

(See Note 2)

.050 ± .002

[1.27]

.100 ± .002

[2.54]

.045 - .060

[1.14] - [1.52]

.025 - .035

[0.64] - [0.89]

*Solder Thief Solder Pads required only on Solder side of PC Board.

View A

Ø.024 ± .003 Typ

[0.64]

.050 ± .002 Typ

[1.27]

Tolerance Noncumulative

Flow Solder

Direction

Position 2

Position 1

.100 ± .002

[2.54]

2X Ø .109 ± .002

[2.77] Ø.024 ± .003 Typ

[0.64]

Recommended Mounting Hole Pattern

(Shown for mounting side of PC Board)

C ± .002

.025 ± .002

[0.64]

.355 Max

[9.02]

.305 Min

[7.75]

.160 ± .002

[4.06]

View A

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Table 1

Contact

Qty

Dimensions

A B C Short Ref C Long Ref D

020 1.060 [26.92] .722 [18.34] 1.671 [42.44] 1.842 [46.77] .860 [21.84]

026 1.210 [30.73] .872 [22.15] 1.817 [46.15] 1.987 [50.47] 1.010 [25.65]

036 1.460 [37.08] 1.122 [28.50] 2.070 [52.58] 2.274 [57.76] 1.260 [32.00]

040 1.560 [39.62] 1.222 [31.04] 2.170 [55.12] 2.365 [60.07] 1.360 [34.54]

050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.609 [66.27] 1.610 [40.89]

060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.872 [72.95] 1.860 [47.24]

068 2.260 [57.40] 1.922 [48.82] 2.870 [72.90] 3.083 [78.31] 2.060 [52.32]

080 2.560 [65.02] 2.222 [56.44] 3.178 [80.72] 3.370 [85.60] 2.360 [59.94]

100 3.060 [77.72] 2.722 [69.14] 3.676 [93.37] 3.875 [98.43] 2.860 [72.64]

TS-0253-29

Sheet 4 of 7

See Note 1

Position 2

.310

[7.87]

Position 1

.015 X .015

[ 0.38 ] X [ 0.38 ]

.050 Typ

[1.27]

.100 Ref

[2.54]

.265 [6.73]

.140 ±

.010

“F”

(See Table 2)

.100

[2.54]

Ordering Information

81XXX-6X0X0X-XX

Ejector/Latch System:

0 = None

5 = With Short Ejectors Installed

6 = With Long Ejector latches Installed Contact Tail: (See Table 2)

2 = Solder Tail for .062 [ 1.57 ] PC Board

3 = Solder Tail for .094 [ 2.39 ] PC Board

4 = Solder Tail for .125 [ .318 ] PC Board

Contact Quantity

(See Table 1)

Board Mounting Options:

1 = None

3 = Press fit posts both ends

Header

Notes:

1. This polarization bump does not exist

on the 20 position header.

2. Recommended to be mated to the

.050″ x .100″ 82XXX Series Socket.

PCB Thickness "F" Solder Tail Length ± .010

.062 [15.7] .090 [2.29]

.094 [2.39] .112 [2.79]

.125 [3.18] .143 [3.63]

Table 2

Ejector Latch

Long

3505-28 (natural)

3505-28B (black)

Short

3505-29 (natural)

3505-29B (black)

Plating suffix:

blank = tin lead tails

RB = matte tin tails

(RoHS compliant)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

TS-0253-29

Sheet 5 of 7

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dim ensions for R eference

Onl

Tolerance Unless Noted

[mm]

Inch

Notes:

1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time).

This will help prevent solder bridging.

2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC

Board in order to help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the

rows which leave the solder bath last.

Ejector/Latches Dimension E (Min)

None .215 [ 5.46 ]

Long .650 [16.51]

Short .525 [13.34]

Table 3

VIEW A

2X .205 ± .003

[5.21]

.050 ± .002 Typ

[1.27]

Tolerance Noncumulative

Flow Solder

Direction

.160 Min

[4.06]

.050 ± .003

[1.27]

.100 ± .002

[2.54]

.225 Min

[5.72]

.100 ± .002

[2.54]

2X ∅ .109 ± .002

[2.77]

Recommended Mounting Hole Pattern

D ± .002

∅.025 ± .003 Typ

[0.64]

View A

(Shown for mounting side of PC Board)

.050 ± .002

[1.27]

∅.025 ± .003

[0.64]

.100 ± .002

[2.54]

.045 - .060

[1.14] - [1.52]

.025 - .035

[0.64] - [0.89]

*Solder Thief Solder Pads required only on

Solder side of PC Board.

View A

*Solder Thief

Solder Pads

(See Note2)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Table 1

Contact

Qty

Dimensions

A B D Short

Ref

D Long

Ref

tape &

suffix reel

020 1.060

[26.92] .722

[18.34] 1.671

[42.44] 1.842

[46.77] WD

026 1.210

[30.73] .872

[22.15] 1.817

[46.15] 1.987

[50.47]

036 1.460

[37.08] 1.122

[28.50] 2.070

[52.58] 2.274

[57.76]

040 1.560

[39.62] 1.222

[31.04] 2.170

[55.12] 2.365

[60.07]

050 1.810

[45.97] 1.472

[37.39] 2.421

[61.49] 2.609

[66.27] WF

060 2.060

[52.32] 1.722

[43.74] 2.671

[67.84] 2.872

[72.95]

068 2.260

[57.40] 1.922

[48.82] 2.870

[72.90] 3.083

[78.31] WG

080 2.560

[65.02] 2.222

[56.44] 3.178

[80.72] 3.370

[85.60]

100 3.060

[77.72] 2.722

[69.14] 3.676

[93.37] 3.875

[98.43] WH

TS-0253-98

Sheet 6 of 7

.0 .00 .000

inch ±.1 ±.01 ±.005

[ ] Dim ensions for Reference

Onl

Tolerance Unless N oted

[mm]

Inch

Ordering Information Header

Ejector/Latch System:

0 = None

5 = With Short Ejectors Installed

6 = With Long Ejector Latches Installed

Board Mounting Options:

1 = None

4 = Press Fit Post Mount at Position 1 end

7 = Metal retention clips

8 = #1 end press fit post & metal retention clips

Contact Quantity

(See Table 1)

81XXX-6X0C0X-XX-XX

Packaging Options:

Blank = Trays

WX = Tape & Reel Package

(see table)

Notes:

1. This polarization bump does not exist on the 20 position header.

2. Recommended to be mated to the .050″ X .100″ 82XXX Series Wiremount Socket.

.015 X ..015

[0.38] X [0.38]

See Note 1

Position 2

.310

[7.87]

Position 1

.050 Typ

[1.27]

.100 Ref

[2.54]

.346 ± .010

[8.79]

.140 ± .010

[3.56]

.265

[6.73]

Position 1

Orientation

Triangle

.440 ± .010

[11.18]

.620 Ref

[15.75]

.165 ± .010

[4.19]

Short Latch

Long Latch

.092

[2.34] Optional Single Press

Fit Post Mount/Alignment

Feature

∅.116

[2.95]

Optional Metal

Clip Retention

.015

[0.38]

.405

[10.29]

.828 Ref

[21.03]

.080

[2.03]

Ejector Latch

Long

3505-28 (natural)

3505-28B (black)

Short

3505-29 (natural)

3505-29B (black)

Plating suffix:

blank = tin lead tails

RB = matte tin tails

(RoHS compliant)

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M™ 4-Wall, Tripolarized Header

.050″ × .100″ Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

Ejector Latches Dimensions

H Min

No .775 [19.69]

Short 1.085 [27.56]

Long 1.21 [30.73]

No. of Positions Dimensions

F G

20 .450 [11.43] N/A

26 .600 [15.24] N/A

36 .850 [21.59] N/A

40 .950 [24.13] N/A

50 1.200 [30.48] .025 [6.35]

60 1.450 [36.83] 0.000

68 1.650 [41.91] 0.000

80 1.950 [49.53] 0.000

100 2.450 [62.23] 0.000

TS-0253-29

Sheet 7 of 7

Recommended Mounting Hole Pattern

(Shown for mounting side of PC Board)

.050 ± .002 Typ

[1.27]

Tolerance Noncumulative

2X .075 ± .002

[1.09]

.205 ± .003

[5.21]

.376

[9.55]

.280

[7.11]

Optional Drilled Hole

for Plastic Post

∅.109 ± .002

[2.77]

.220 ± .003

[5.59]

.158 ± .002

[3.96]

See Detail A

.029 ± .001

[0.74]

Position 2

.110 ± .002

[2.79]

Position 1

∅.065 ± .002 Typ

[1.65]

Typ, Full R

Detail A

Optional plated thru hole

for metal clip retention

∅ .042 ± .003 Typ (Plated thru hole)

[1.07]

Printed in USA.

Minimum 10%

Post-Consumer Fiber

Important Notice

All statements, technical information, and recommendations

related to 3M’s products are based on information believed to be

reliable, but the accuracy or completeness is not guaranteed.

Before using this product, you must evaluate it and determine if it

is suitable for your intended application. You assume all risks and

liability associated with such use. Any statements related to the

product which are not contained in 3M’s current publications, or

any contrary statements contained on your purchase order shall

have no force or effect unless expressly agreed upon, in writing,

by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture

for a period of 90 days from the time of purchase. 3M MAKES

NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED

TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. If this product is

defective within the warranty period stated above, your exclusive

remedy shall be, at 3M’s option, to replace or repair the 3M

product or refund the purchase price of the 3M product. Except

where prohibited by law, 3M will not be liable for any indirect,

special, incidental or consequential loss or damage arising

from this 3M product, regardless of the legal theory asserted.

Electronics

6801 River Place Blvd.

Austin, TX 78726-9000

800/328-1368